My first sub-ohm coil

[Sucker_dad]

OK this is my first dual coil sub-ohm build. I used 2 strands of 32 gauge twisted, 8 wraps each coil. Now I am just waiting for my brass Nemesis and batteries to get here. The Nemesis is coming from FT and should be here any day. I procrastinated a little and the batteries will probably not make it until Thu or Fri. My itaste meters it at .7 ohm, I am looking forward to trying it out. I wicked just one of the coils and it hits smooth as hell. It's a little lower resistance than I should run on my itaste 3.0 so I only hit it a couple of times. So how does it look?

 

[mackman]

Hard to tell from the picture. You want to make sure that the distance from the posts on the deck will not short on the cap. You can also fire your coil to heat it and then release and pinch the coils together with needle nose pliers or such.

Vape on

 

[DrillRX]

OK this is my first dual coil sub-ohm build. I used 2 strands of 32 gauge twisted, 8 wraps each coil. Now I am just waiting for my brass Nemesis and batteries to get here. The Nemesis is coming from FT and should be here any day. I procrastinated a little and the batteries will probably not make it until Thu or Fri. My itaste meters it at .7 ohm, I am looking forward to trying it out. I wicked just one of the coils and it hits smooth as hell. It's a little lower resistance than I should run on my itaste 3.0 so I only hit it a couple of times. So how does it look?
View attachment 286648

You definately want to move those closer to the posts. Should work fine though on a mech.

 

[Sucker_dad]

I've heard that before. The reason I have long legs on that dripper is the air came in underneath the coils so I drilled holes on the body because the ones underneath were too small. I got them a little high so I put longer legs on the coils so I could get them up closer to the air holes. I kind of like my coils to be as close to the air hole as I can get it. As far as shorting I have never had one do it. After you burn a little juice on them they are pretty much immune to shorting by casual contact in my experience. And they aren't as far out as the picture makes them look. It's a crappy iphone picture and the angle is deceptive.