Need help on Clapton Coil Build

[Ishh]

So I recently bought the eleaf istick TC100w box mod. It has 2 batteries (EACH battery is 2500mAh with 20A continuous). I know there are websites like steam engine to tell me how many wraps I need but I am a newbie. I tried watching YouTube videos and know how to make it but am stuck on the basics. I want to have a dual coil build and it will be on a velocity deck. What gauge kanthal wires will I need? What is the lowest resistance I can go to (any recommended sweet spots)? And how many wraps for each coil? Thanks!

P.S: I am aware of this website (Coil wrapping) I don't know how it would apply for the clapton build since there are two different gauge wires and the website doesn't have that option.

 

[Dipper926]

For the record, this is still upsetting to me, that and no drill. No way to gauge what a build will be like ohm wise. Still can't build claps. Still confused. Oneday I'll learn.

Sent from my SM-T800 using Tapatalk

 

[Lucas Rong]

On a regulated device, inner wire gauge or ohms of your claptons doesn't really make a difference since you can adjust your power. Outter wrap wire however, needs to be at least 34 gauge or thinner to have a enjoyable vape. Because anything thicker than that, will have a significant ramp up time. My go to build for regulated is fused clapton 26g x 26 6 wraps around a 3mm.

 

[Bn0_Vapes]

So I recently bought the eLeaf iStick TC100w box mod. It has 2 batteries (EACH battery is 2500mAh with 20A continuous). I know there are websites like steam engine to tell me how many wraps I need but I am a newbie. I tried watching YouTube videos and know how to make it but am stuck on the basics. I want to have a dual coil build and it will be on a velocity deck. What gauge kanthal wires will I need? What is the lowest resistance I can go to (any recommended sweet spots)? And how many wraps for each coil? Thanks!

P.S: I am aware of this website (Coil wrapping) I don't know how it would apply for the clapton build since there are two different gauge wires and the website doesn't have that option.

Honestly if your could chasing, I would switch to nichrome, it heats up faster and has less resistance then kanthal, you need any help with anything text me or call 570-994-9677 I'll help you with anything you need

 

[Bn0_Vapes]

For the record, this is still upsetting to me, that and no drill. No way to gauge what a build will be like ohm wise. Still can't build claps. Still confused. Oneday I'll learn.

Sent from my SM-T800 using Tapatalk

Once you get a drill and wanna bang some coils out hit me up, 570-994-9677

 

[Dipper926]

Once you get a drill and wanna bang some coils out hit me up, 570-994-9677

Alright, will do.

Sent from my SM-T800 using Tapatalk