Need opinions on a build im doing

[JediTossingClouds]

Ok so..i need you guys' expert opionions. I'm thinking of doing a dual parallel build on my copper tobh...im thinking nano 16 wrap (which is 8 per strand). Im curious as what you all think. Of course if it drops lower than 2.0 i will not fire it at all. Like i said im just very curious as to what you all think. Leave suggestions of builds if you all think this one is too risky. If it helps im using 28g kanthal on a Penny mod running Sony VTC4s. Thanks and keep throwing clouds!

 

[Cullin Kin]

I'm not really sure what you're asking. All I care is that you have an ohm reader, if you do, build whatever you want as long as your battery can handle it.

What size wrapping post? A dual parallel build may be a PITA on a Tobh but if your willing to try, all the more power to ya.

 

[JediTossingClouds]

im using a 20g syringe needle for the coils and what im asking is if you all think it will do well or not, or if its foolish to even try, i do have an ohm reader because i don't want my face to be gone. And im also looking for decent build suggestions as i've only been building my coils for around 2 months

 

[realsis]

Give it a try, check your ohms, and see how you enjoy the vape. I personally don't vape that low, but if you have a battery that will handle that load and go go about this safely, then see how YOU like the build. Always know your batteries limitations, check your ohms, and be safe. If you can do the build safely then give it a try and see how YOU like it. Just be absolutely certain your battery can handle the load.

 

[JediTossingClouds]

thanks and i religiously check my ohms for fear of losing this pretty face but on a serious note i will try this tonight and see how it goes...if its too low then i guess i can just take one out and run a single parallel coil for a while. I'll let you all know how it turns out. Thanks again

 

[Cullin Kin]

im using a 20g syringe needle for the coils and what im asking is if you all think it will do well or not, or if its foolish to even try, i do have an ohm reader because i don't want my face to be gone. And im also looking for decent build suggestions as i've only been building my coils for around 2 months

Okay, I gotcha. Yeah, why not, give it a try. There was just a thread yesterday about different different builds on a Tobh, here: http://www.e-cigarette-forum.com/fo...ystems/559721-how-do-you-build-your-tobh.html

I've tried a lot of builds, and imo, nothing works as well or tastes as good as just a dual coil in parallel setup. If you're looking to just mess around with builds, check out the 'stove top' build, the 'sleeper' build, the 'inception coil' build, and look into Mundy's Magic Wire for some crazy stuff.

 

[JediTossingClouds]

Yeah tried the 'sleeper', 'dragon' and the 'stove top' but i have a single parallel build in my atty right now and it puts out some decent vapor but i feel like its missing something and i cant put my finger on it. So thanks for the info and ill check out that link you gave me tomorrow at work and hopefully ill see something that pops out at me. Again thanks for the info

 

[DreamWithin]

Moved to Coil Builds forum from General Discussion

 

[JediTossingClouds]

thanks for moving

 

[Cullin Kin]

Yeah tried the 'sleeper', 'dragon' and the 'stove top' but i have a single parallel build in my atty right now and it puts out some decent vapor but i feel like its missing something and i cant put my finger on it. So thanks for the info and ill check out that link you gave me tomorrow at work and hopefully ill see something that pops out at me. Again thanks for the info

Of course. I just want to clarify, you mean you are going to build a dual coil (parallel) setup right? A setup with two coils total. Not a dual parallel setup that has four coils total right?

Like this, yeah?

 

[JediTossingClouds]

yes just like that! that's kind of what im planning but 8 wraps

 

[Cullin Kin]

yes just like that! that's kind of what im planning but 8 wraps

Okay cool. You should really enjoy that build! Have fun.

 

[JediTossingClouds]

so i built it and my god... i love it

 

[Docsgt68]

I was gonna say you'll love it, very similar to what I'm running right now.

 

[tayone415]

so i built it and my god...View attachment 363251 i love it

The coil in the back, should be moved a little, it looks like it is barely not touching the deck and it is possible that if your screw gets lose the coil can move and short.

 

[JediTossingClouds]

yeah i noticed that too right after i took the picture and shoved it over. Since then i have actually swapped the build for a dual vertical build

 

[sahsah]

so i built it and my god...View attachment 363251 i love it

so if my understanding is correct looking at your build in this tiny picture from this angle, you went with like a cotton wicking bed instead of threading the wicking through your coils. Any reason you took that route? Did you try wicking it in the standard form and found better results with this setup? Thanks in advance

 

[rodeo302]

Nano coils are impossible to get enough wick through to not get a burnt taste since they are so small so a bed is ideal for them.