Nemesis Firing Pin(s) Always Loose

[ZicZacCadillac]

As the title suggests, the firing pins on my Nemisis Clone (h-cigar) seem to loosen gradually through out the day with continual use..


I have to stop and tighten the button pin back down every couple hours, for fear that my button will loosen completely and come apart (this has happened before, and it's how I lost my rice pin)..

​


The only solution seems to be to tighten the bottom firing pin all the way down to the base of the button, which is something I can get away with, however this causes some serious voltage drop, as it touches my makeshift rice pin (a small piece of an allen key).



I've also found that tightening the bottom firing pin all the way down, causes the top firing pin to loosen over time, and thus voltage drop.

The Point:
Is there any way to use my nemmy without needing to worry about those pins becoming loose? I'm sure there is an elegant solution/modification out there!

 

[imb1610]

actually thats funny i was about to post voltage drop test results done using a multimeter and ask for help i never thought it could be that loosening pin its never really bothered me all too much because it usually take a while at least for me to loosen up(ordered magnets currently using spring not sure if it makes a difference) too much happens every 4-6hours My issue was regarding vape quality which seemed to fluctuate and the voltage drop test is showing that within one hour of testing one minute voltage drop is .3-.4 and the next it is 1.2-1.3 it maybe faulty batteries but i will continue and post it later