NEW and Available NOW - Joyetech ECA - Evic Changeable Atomizer Type B 2.2ohm

[dannoman]

joyetech ECA - Evic Changeable Atomizer Type B 2.2ohm
$19.95

The joyetech eVic ECA Type B is made especially to match the eVic aesthetically, it can of course work with any other 510 threaded PV or APV. The joyetech eVic Type B ECA means it is the short tube version which can specifically work with other mods also. We have the Type A longer tube coming in that simply provides an all-in-one unit that threads into the outside eGo threads of the eVic - basically providing a bottom skirt, otherwise it works the same and has the same capacity as the Type B. We have the new eVic face tubes that can couple with the Type B to provide a completely streamlined look on the eVic OR you can pair it with the completely cylindrical eVic Easy head which is on order and will be here at GotVapes.com shortly. We will also have the eVic top facing tube available separately at some future point.

The eVic Type B comes with everything including:

• 3.5ml tank - white (we have charcoal color coming in)
• Tube housing
• Changeable atomizer head - 2.2ohm
• Two additional spare o-rings
• This utilizes the Joyetech TYPE A Changeable Atomizers - we have these in both low and regular resistances.
• Outstanding small manual pamphlet to get you started.

You can find additional 3.5ml tanks and replacement changeable atomizers in this category.


--------------------------------------------------------------------------------
BELOW IS INFORMATION FROM THE JOYETECH WEBSITE
--------------------------------------------------------------------------------
Good news for every one! We have released a new product named ECA(eVic changeable atomizer)!

ECA atomizer is designed to specially match the eVic battery that stands out the coordination of eVic . It has a long service life because of combining together the bigger cartridge which can hold 3.5ml of e-juice and the high capacity battery. It’s revolutional top inletting system which realizes entering air from the top instead of then classic bottom air-entering system that will solve the leakage parmanately and perfectly. It remains the Joyetech’s concept of changeable atomizer head which could make our fans continue to use their previous ones. It enables our users to enjoy the vaporing time just like eGo-C does. It is a nature part of eVic that makes eVic not lonely any more.

Our eVic has been receiving a lot of positive feedback from new and returning customers ever since it was released. ECA will be a gift to appreciate our fans, it is a new special atomizer for eVic that can bring more joy to customers.

Hopefully ECA will enable you to gain more funs when you vapor with eVic.

Joyetech eVic Central : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[yiddleboge6]

Wow!!!! They just keep coming with goodies for the eVic.....Thank you Danno!!

 

[badkolo]

whoppppie, lovin these

 

[rdsok]

Danno...

Not to be buggin' ya... But I think you got mixed up on the type a/b/c stuff some...

Double check the type of atomizer these use... I think you'll find that the atomizer is a type c like the eGo-C uses ( not to confuse the various tanks they are calling a, b or whatever ) and they do use a type a cone. I think the type a atomizer will be for the eGo or possibly eGo-T actually.

 

[dannoman]

Hey red sock - The replacement attys we have are for the eVic ECA...they are the same ones used for the eGo C system also and also eCab and eRoll. The heads are Type A and are to be used for both the Type B (short tube ECA) and the Type A (long tube ECA)...

Danno...
Not to be buggin' ya... But I think you got mixed up on the type a/b/c stuff some...

Double check the type of atomizer these use... I think you'll find that the atomizer is a type c like the eGo-C uses ( not to confuse the various tanks they are calling a, b or whatever ) and they do use a type a cone. I think the type a atomizer will be for the eGo or possibly eGo-T actually.

 

[rdsok]

Danno...

Not to be buggin' ya... But I think you got mixed up on the type a/b/c stuff some...

Double check the type of atomizer these use... I think you'll find that the atomizer is a type c like the eGo-C uses ( not to confuse the various tanks they are calling a, b or whatever ) and they do use a type a cone. I think the type a atomizer will be for the eGo or possibly eGo-T actually.

Hey red sock - The replacement attys we have are for the eVic ECA...they are the same ones used for the eGo C system also and also eCab and eRoll. The heads are Type A and are to be used for both the Type B (short tube ECA) and the Type A (long tube ECA)...

Type A, Type B, eGo C, Tank A, Tank B...

 

[byggd]

For those who have used these how are they working out for you?

 

[Dgephri]

I have a couple of these, and four tanks for them. The atomizers seem to burn out quicker than my protank attys, but I have successfully soaked them in ISO and then let them air out for a couple days and gotten two more cycles out of them.

I REALLY like that the fluid can't drip down to your connections. I think they vape nicely on my eVic at 6-8-10watts depending on the fluid needs. The 5ml tank is a good size, and it's are pretty damn easy to open, rinse, shake dry and vape a new flavor. I don't miss tasting old fluid when I used wicks, even on the RBAs I have.

I have powdercoated a couple.

I did have one that somehow allowed fluid down beneath the atty and it ended up affecting the finish in the threading and I hesitate to use it for vaping after that finish flaked and gunked up everything.

 

[byggd]

I have a couple of these, and four tanks for them. The atomizers seem to burn out quicker than my protank attys, but I have successfully soaked them in ISO and then let them air out for a couple days and gotten two more cycles out of them.

I REALLY like that the fluid can't drip down to your connections. I think they vape nicely on my eVic at 6-8-10watts depending on the fluid needs. The 5ml tank is a good size, and it's are pretty damn easy to open, rinse, shake dry and vape a new flavor. I don't miss tasting old fluid when I used wicks, even on the RBAs I have.

I have powdercoated a couple.

I did have one that somehow allowed fluid down beneath the atty and it ended up affecting the finish in the threading and I hesitate to use it for vaping after that finish flaked and gunked up everything.

Thank you for the reply and review. Does the atomizer poke up into the tank like the eGo type A, B, C ??