I just bought a Cig2o starter kit while visiting family in the US but have returned to my home in hong Kong, where vaping is illegal. I would love advice on the following: 1. Does anyone know of retail outlets/stores where I can walk in and buy supplies in Hong Kong, Lo Wu (Shenzhen), or Shanghai? 2. if I can't find a retail shop, are there any online suppliers who can ship to Hong kong or would it be better to have my order sent to my husband's office in Shanghai? 3. Can the Cig2o cartridges be refilled with e juice and if so, whats the best menthol juice to use? I'm so new to this and feel very lost and overwhelmed by all the terminology...Any help will be greatly appreciated!!!
New and need HELP in Hong Kong!!
- Thread starter LM in Hong Kong
- Start date
- th_trl_thread_readers 0
-
- Tags
- litecigusa
- Status
Hi LM and WELCOME TO THE ECF!
You've come to the right place and yeah, I've been overwhelmed with the terminology and information on this forum when I first started too. I know of some websites that you can check out. They are located in China and so, you won't have a problem with them shipping to your husband or maybe you (since it's illegal there, don't know if the items might have issues when it gets to Hong Kong):
Healthcabin Electronic Cigarettes - Wholesale and Retail--
Manufacturers, Suppliers, Exporters & Importers from the world's largest online B2B marketplace-Alibaba.com
www.EastMall.net Eastmall International Co.,Ltd
Greenhouse One | Electronic Cigarettes | Atomizers | Eliquid
Best electronic cigarettes_ecigarettes_eliquids_ejuices - Heaven Gifts
You've come to the right place and yeah, I've been overwhelmed with the terminology and information on this forum when I first started too. I know of some websites that you can check out. They are located in China and so, you won't have a problem with them shipping to your husband or maybe you (since it's illegal there, don't know if the items might have issues when it gets to Hong Kong):
Healthcabin Electronic Cigarettes - Wholesale and Retail--
Manufacturers, Suppliers, Exporters & Importers from the world's largest online B2B marketplace-Alibaba.com
www.EastMall.net Eastmall International Co.,Ltd
Greenhouse One | Electronic Cigarettes | Atomizers | Eliquid
Best electronic cigarettes_ecigarettes_eliquids_ejuices - Heaven Gifts
Thanks for the info, I've contacted Heaven Gifts and am working on my order now...so much to learn and really appreciate your help!!!
Your close enough to Shenzhen maybe get a big handbag and take a day trip over, see what shops you can find and get some samples. Stick with the DSE, Smok, or Joye for hardware and Dekang for liquid and you should be alright.
Thanks BardicDruid! Love that you know HK. Do you think the electronic shops in Lo Wu would sell stuff? I've got to believe there would be retailers on the Mainland, esp in places so close to all the producers, I just can't find any info on the net. Going next week so fingers crossed : )
I think Cig2O and Cig2Go are KR808D-1 (Kanger and Boge and others make KR808D-1 blank cartos)
You probably have auto batteries - they can be damaged or killed by juice leaks much more easily than manuals. So if you keep cartos damp you have to be extremely careful that the carto won't leak onto the end of your battery. I only use manual KR808D-1.
This is how I fill good KR808D-1 cartomizers and Joye 510 cartomizers (another model ecig) that have a soft cap that is removable for adding juice
How I fill a cartomizer (Vapor4Life for KR8 or Boge 510 for 510 which are all soft-cap w/ no inner seals and defined central air channel)
I use thin (20% or less VG) liquid or Vapor4Life WOW liquids, preferably clear liquids w/ no sediment
Filling a blank carto - I pop off the soft cap (unbent paperclip carefully in the mouth hole, not catching any wires or stuffing!). I hold some tissue against the threaded end hole. I tilt the carto and slowly drip 18 drops onto the inner wall of the carto so it slides down into the stuffing while I rotate the carto. Then I wait 15 seconds or so then I drip however many more drops the stuffing wants to soak up. Then I do clean-up. If it is leaking, I clean that up. Then I tilt the open end down into the tissue and puff hard a few times into the threaded end to clear any juice out of the central air channel (I want to see light through there). If it looks too wet above the stuffing, I gently touch a bit of tissue to the stuffing (otherwise that liquid will be gurgling or spitting in my mouth). Then since this was a fresh fill of a blank, I now let it settle. I lay the carto on different sides for 15-20 minutes. Then it should be ready to vape. If you use thicker juices than me, then you may need to let it settle longer.
As I am vaping - if the vapor gets a bit light or a bit dry or tastes bit off or the carto is getting unusually warm, I will take the carto off the battery, open it, add 6-8 drops or whatever it seems to want (I will either hold a bit of tissue against the threaded end hole just in case, or skimp on how many drops I add to make sure I avoid drips if I have no tissue). I check to make sure the threaded end is dry, give it a couple of puffs into the threaded end to make sure the air channel is clear, and continue to vape.
Note - it is easy for me to "open" my main cartos for adding juice because I replace the white end cap with a plastic or delrin drip tip (I get them at LiteCigUSA.net). So I can easily pull that out with my fingers when I add juice and it keeps my lips cool if the carto is hot.
You probably have auto batteries - they can be damaged or killed by juice leaks much more easily than manuals. So if you keep cartos damp you have to be extremely careful that the carto won't leak onto the end of your battery. I only use manual KR808D-1.
This is how I fill good KR808D-1 cartomizers and Joye 510 cartomizers (another model ecig) that have a soft cap that is removable for adding juice
How I fill a cartomizer (Vapor4Life for KR8 or Boge 510 for 510 which are all soft-cap w/ no inner seals and defined central air channel)
I use thin (20% or less VG) liquid or Vapor4Life WOW liquids, preferably clear liquids w/ no sediment
Filling a blank carto - I pop off the soft cap (unbent paperclip carefully in the mouth hole, not catching any wires or stuffing!). I hold some tissue against the threaded end hole. I tilt the carto and slowly drip 18 drops onto the inner wall of the carto so it slides down into the stuffing while I rotate the carto. Then I wait 15 seconds or so then I drip however many more drops the stuffing wants to soak up. Then I do clean-up. If it is leaking, I clean that up. Then I tilt the open end down into the tissue and puff hard a few times into the threaded end to clear any juice out of the central air channel (I want to see light through there). If it looks too wet above the stuffing, I gently touch a bit of tissue to the stuffing (otherwise that liquid will be gurgling or spitting in my mouth). Then since this was a fresh fill of a blank, I now let it settle. I lay the carto on different sides for 15-20 minutes. Then it should be ready to vape. If you use thicker juices than me, then you may need to let it settle longer.
As I am vaping - if the vapor gets a bit light or a bit dry or tastes bit off or the carto is getting unusually warm, I will take the carto off the battery, open it, add 6-8 drops or whatever it seems to want (I will either hold a bit of tissue against the threaded end hole just in case, or skimp on how many drops I add to make sure I avoid drips if I have no tissue). I check to make sure the threaded end is dry, give it a couple of puffs into the threaded end to make sure the air channel is clear, and continue to vape.
Note - it is easy for me to "open" my main cartos for adding juice because I replace the white end cap with a plastic or delrin drip tip (I get them at LiteCigUSA.net). So I can easily pull that out with my fingers when I add juice and it keeps my lips cool if the carto is hot.
Welcome LM! It's too bad HK bans e-cigs. Dekang has an office in Shenzen (info below). Their minimal order quantity is pretty large, but maybe you can get more some info and samples from them. Shipping your orders to your husband is also a great idea! 
JANICE LIANG 梁婷婷
Sales Consultant
Headquarter .China
sale3@dekangbio.com
云南昌宁德康生物科技有限公司
Unit B1,Bld6,Entrepreneurial Industrial Park Shangxiawei,Shajing
3th Street, Baoan Dist, Shenzhen, P.R.C518104
Tel: +86-755-27567890 ext.8006 Fax:+86-755-27269330
Skype: dekangjanice MSN: dekangjanice@hotmail.com
Edit: or take a train to Shenzen!
JANICE LIANG 梁婷婷
Sales Consultant
Headquarter .China
sale3@dekangbio.com
云南昌宁德康生物科技有限公司
Unit B1,Bld6,Entrepreneurial Industrial Park Shangxiawei,Shajing
3th Street, Baoan Dist, Shenzhen, P.R.C518104
Tel: +86-755-27567890 ext.8006 Fax:+86-755-27269330
Skype: dekangjanice MSN: dekangjanice@hotmail.com
Edit: or take a train to Shenzen!
Last edited:
- Status
Similar threads
