new atty mod doubles vape production

[froginblender]

i came up with a sweet new trick to double your vape production for sure...
and by using 5 drops of liquid, i don't have to drip as often!

made a page up so can visually show you all what to do....it's so frigging awesome...never again
drip without my fishfilter mod!
heheh
tell me what u think about it...
http://balancedpetfood.com/myfiles/alienvape.html

 

[Para]

How is this different than the blue foam fish filter mod? Looks more like a promotion/ad to me

 

[froginblender]

i don't want to spam friends site..... but my mod does work awesome....and yea you could use blue fish filter..brown, pink whatever floats ur boat paralelell

 

[webbcm127]

wont the filter melt? ive used BF in my carts and ive done the spring/plug cart mod but putting it in the atty around the mesh seems harmful? have you been using this for awhile whith out your filter melting? let me know thanks

 

[NukeDOC]

wont the filter melt? ive used BF in my carts and ive done the spring/plug cart mod but putting it in the atty around the mesh seems harmful? have you been using this for awhile whith out your filter melting? let me know thanks

as long as the filter material doesnt actually touch the heating coil (under the bridge), then you wont risk burning it. to me, this basically looks like youre turning your atty into a mini cartomizer!

 

[JonnyVapΣ]

I previously tried this with a nice fat 801 and a 510. If you like burny synthetic melty goodness then this is the "mod" for you!

 

[webbcm127]

I previously tried this with a nice fat 801 and a 510. If you like burny synthetic melty goodness then this is the "mod" for you!

thanks...thats what i thought the response was going to be

 

[froginblender]

wont the filter melt? ive used BF in my carts and ive done the spring/plug cart mod but putting it in the atty around the mesh seems harmful? have you been using this for awhile whith out your filter melting? let me know thanks

NO!!
People use that in blank cartridges, and it doesn't melt...
I've been using this for 4 months now....it's awesome!!!

I get 5 to 6 drops in there.... so i drip less.....and the hits are frigging crazy..u see my video?
the last box that says Vape me 2 ur leader?
lol....u see how much vape i get on an ego, with regular atty?
i blow away a 6 volt ...check out the cloud..

Enjoy give me ahollar when you do it..it's truly insane plumes man..

 

[froginblender]

I previously tried this with a nice fat 801 and a 510. If you like burny synthetic melty goodness then this is the "mod" for you!

.been using it for 4 months..no burns ever....dude.....go check out my link....and check out my video in last box on bottom......see the plumes....and u should don't bother with it...stick to your puny little puffs..............lol.

 

[froginblender]

as long as the filter material doesnt actually touch the heating coil (under the bridge), then you wont risk burning it. to me, this basically looks like youre turning your atty into a mini cartomizer!

the filter is surrounding the atty, dam..didn't anyone see my page? see my vapeage video in last box?

the filter is tom's...i don't know about the blu foam....should work the same, but this .... don't burn man....geez...i posted this to help you all..im not here to kill u...

try it , you'll never vape without it again...i swear on mother's grave...
dam, tough crowd here..

 

[Kelemvor]

if its not heat resistand it will burn/smell. even the edges of a 510 cart sometimes melt a little bit.
the better solution is a stainless steel mesh like the genisis atomizer uses. some people did use it around the atomizer mesh and are very much pleased, but even there some may taste the mesh. tastes differ from person to person.

using anything like plastic near the atomizer should be avoided, it gets hot in there. no matter what plumes of vapor you produce in your video.

all in all i find your tone against others quiet offensive.

 

[JonnyVapΣ]

all in all i find your tone against others quiet offensive.

And that's the bottom line.

 

[JonnyVapΣ]

you must be disabled or something upstairs....been using it for 4 months..no burns ever....dude.....go check out my link....and check out my video in last box on bottom......see the plumes....and u should don't bother with it...stick to your puny little puffs...........friggin girly reply...lol.

BTW....I did check out that link. Gave me a 90's flashback.

Additionally, your sentence structure sucks.

 

[froginblender]

I previously tried this with a nice fat 801 and a 510. If you like burny synthetic melty goodness then this is the "mod" for you!

dude, .i've been doing this 4 months..never burned the material yet!
this is what you use in cartridges...i'm just making it so there's 360 degrees of juice always on atty, and less dripping since i drip 5 to 6 drops per vape session...so it lasts like 37 drags....
LOL>>>>>
Go see my video on my page bro....click the Vape me 2 ur leader link..last box lower right side...K
Dude, the vape hits i get are then a 6 volt....and i'm using regular joye atty...lol...

 

[NukeDOC]

yeah u just have to set it in a way that your filler is not touching the heating coil in any way. this method is basically adding more of a reservoir for the liquid to sit in and ensure good contact to the bridge (whose main purpose is to draw the juice out of the filler in the cartridge). its a simplified version of the regular set up. and basically a different take on the cartomizer concept. but again, just gotta be careful that the filler material does not contact the heating coil.

 

[Kelemvor]

let me guess, you 2 are close friends, right?

 

[Zen~]

Is froginablender using English?

I don't understand what he's saying... it looks KIND of like English... WHAT IS IT?

I'M FREAKING OUT!

 

[froginblender]

yeah u just have to set it in a way that your filler is not touching the heating coil in any way. this method is basically adding more of a reservoir for the liquid to sit in and ensure good contact to the bridge (whose main purpose is to draw the juice out of the filler in the cartridge). its a simplified version of the regular set up. and basically a different take on the cartomizer concept. but again, just gotta be careful that the filler material does not contact the heating coil.

you don't have to do anything use tom's fish filter..and it won't burn....wtf is wrong w/u all???

 

[Java_Az]

This Tread is getting totally outa hand

 

[JonnyVapΣ]

I find it entertaining.