New, but need a question answered ASAP

[douevensubohm]

Alrighty, so let me try to explain this as best as possible.
I do not know how well everyone's knowledge is on MOJO mods but...
I have a Buffalo by Mojo, 1:1 mod. (Cloned by Infinite)

I did watch a review video on it before I bought it, and It was a steal for me.
Magnetic Button, Sleek nice design, 2 tone Stainless with Brass Rings

Besides that all, I did see in this one guys review video, that with the mojo style, the top area, where the 510 connection is has a weird design for a air flow.
It is very, "Spinny"

When i try to take off the rba, it just spins.
In the video review, the guy ended up having to stop the video and get it off, then he re continued.. unfortunately not showing how he was able to get the atty off.
I was wondering if anyone has ever ran into this problem, and maybe can give me some knowledge on a fix.

 

[2naphish]

small strap wrenches work best , with the least amount of potential damage. good luck.

 

[douevensubohm]

I hears people talking about using lock wrench with putting rubber gloves underneath so minamize damage, but what exactly do you have to do once its locked down? Like i said, it just spins no matter what way i go, left or right.. It just won't start to un thread I guess. The 510 connection top piece as well as the 510 atty spin. I can spin both seperate ways, same ways, etc.. just not de threadding. Im confused as hell.

 

[philoshop]

Sometimes even a rubber band or two can be used to grip and twist.
BTW, welcome to ECF! Someone with knowledge about your specific problem will probably show up shortly.

 

[daz2013]

Try putting it back together with battery in i have to do this sometimes to stop the top from spinning whilst removing atty.



Sent from my GT-S7500 using Tapatalk 2

 

[douevensubohm]

hopefully lol, i mean it tokes up smoke works great, its just anoying me that i cant test my battery voltage and ohm readings because they are stuck together. the guy in the review had the same problem, but like i said got it off, off camera. I even PM'd him on youtube. So hopefully I can get an answer soon. Thanks for everyones feedback thus far.

 

[douevensubohm]

I'll def keep that in mind, to put the atty on while battery is in.. Still have to get the damn thing off lol.

 

[douevensubohm]

I got it off finally!

Just for anyone wondering, all i did was unscrewed the battery rattle thing to as loose as i could get it before it falling out, and it made a perfect tight fit to where there was no spin and it came right off.

0.6 sub ohm single nano coil, was finally able to see what ohm i was reading.

 

[daz2013]

The battery stops the top from spinning its the only way i can get my atty off sometimes.

Also check the pins on the button and 510 battery side.
Mine had a little nipple in the centre from machining and i had to sand them flush to get better battery connections.

Sent from my GT-S7500 using Tapatalk 2

 

[Warpigs]

Welcome to ECF!