New case idea? A dart case!

[rsngfrce]

I had a brainstorm a while back while surfing around looking for things to use as an e-cig case... a dart case! I've never seen this idea mentioned before. Here is a company that produces a lot of interesting cases:

GLD Products, Inc.: DartsDart Cases

I personally ordered the GLD Casemaster Super Bee case from this location:

Casemaster Dart Cases

I'm not a dart player so I don't know about darts, but this case is for Bee darts which are shorter than normal darts. This case works perfectly for my Janty Dura-C. I like a case as small as possible that can hold what I need.

Size comparison to cell phone:

Inside of case holding 3 assembled Dura-C's, 4 carts, 2 3ml juice bottles:

The right side of the case has 3 elastic loops to hold the e-cigs at the middle and 3 non-elastic pockets at the bottom (which are a tight fit for the battery, but don't need to be used). This case does not have belt loop or clip, but fits well in my pocket.

This is a great case if you want to carry your e-cig assembled... I wouldn't use if for my Pilot M401 because I carry that unassembled and use a slight smaller memory card case for that. The larger cases might be usable for longer e-cigs like the penstyle. Many different and interesting styles of cases available...

 

[breakfastchef]

Great idea. I played darts on a league years ago and just pulled out my old sets of darts. The cases look like they would work real well except I can't figure out what to put in the slots for the flights.

 

[rsngfrce]

Great idea. I played darts on a league years ago and just pulled out my old sets of darts. The cases look like they would work real well except I can't figure out what to put in the slots for the flights.

Well, I've got carts in those slots, but I can only use 2 of the 4 slots due to thickness...

 

[Sar]

What a great idea! How long are the Janty Dura-C assembled? I am currently using 901s and would like to compare that...

Thanks.

I had a brainstorm a while back while surfing around looking for things to use as an e-cig case... a dart case!
<SNIP>
This case works perfectly for my Janty Dura-C. I like a case as small as possible that can hold what I need.
<SNIP>

 

[rsngfrce]

Assembled the Dura-C is 4.5 inches long or 115 mm. My understanding is that a 901 is 119 mm long so it seem like it should fit fine...

 

[rinkusu]

Thanks! I've been looking for carrying cases and these are perfect!

 

[chicagobrad01]

Nice find there rsngfrce.
That's the perfect case for my needs, just what I've been lookin for!

 

[olderthandirt]

I had a brainstorm a while back while surfing around looking for things to use as an e-cig case... a dart case!...

You are truly a Rising Force rsngfrce! I was out doing errands on Saturday, looked at USB drive cases, cell phone cases etc., nothing really just right.

I was just sketching out a cardboard slide-tray thingie to use in a plastic cigarette box 'bout 1/2 hour ago. Frustrating but I was going to make it work! Came upstairs and found your post and all I can say is thank you for your find

 

[Sar]

Thank you for this!! I have ordered 1 for 901 and 1 larger one but the same style for 801. I'll let you know how they fit...

Assembled the Dura-C is 4.5 inches long or 115 mm. My understanding is that a 901 is 119 mm long so it seem like it should fit fine...

 

[Zilthai]

I've seen some cool-looking cases but not a whole lot with belt clips. I'm actually looking for a way to mod one of my old leather (analog) cigarette cases to fit all my RN4081 gear. I went to the trouble of making them over the last few years and I would hate for them to go to waste at this point...

I need to make an insert in the style of those green and white "Health E-Cigarette" boxes.

 

[Vapor Fiend]

DUDE! Perfect idea! Why didn't I think of this! I was playing darts and vaping LAST NIGHT!

Can't wait to get home and slap my 901 in my bomber's case.

 

[korruption]

Good idea but dart cases are kind of long. I am still in the hunt for a small case to keep in my front pocket. Right now i am using a manicure clasp case, but it is still a touch to big for my taste.

 

[rsngfrce]

Good idea but dart cases are kind of long. I am still in the hunt for a small case to keep in my front pocket. Right now i am using a manicure clasp case, but it is still a touch to big for my taste.

True, that is why I got the 'Bee dart' case, whatever that is, which is shorter... couldn't go smaller that this and still carry a Dura-C assembled I don't think, but if you want to carry disassembled, this is what I use:

http://www.e-cigarette-forum.com/fo...how-do-you-carry-your-e-cig-6.html#post191329

Maybe a little too thick for a front pocket though...

 

[AnimeFur]

I was thinking for the belt clip request, get a mini mag lite holster.

Just a thought.

 

[GrimmGreen]

i'm sorry for bumping this thread , but i would like to see pictures of a device being used in one of these cases , i'm interested in getting one... but sketchy on how big they are

 

[slaucy]

WOW sounds amazing. Ive been using a ipod case w/ beltloop. its a bit big though. Going to check it out for sure. theres not much for guys and lord knows most of us arnt going to the fanny pack.lol

 

[seminolewind]

I just ordered The Quiver for my 801's

 

[ThreeDogDad]

I just ordered The Quiver for my 801's

Your going to love it! I put two Kissboxes, room for three.
Juice, carts, it will fit in your pocket.
Thanks OzoneBillards Best $7.95 spent.
Model DSC0555-01

 

[SleepHater]

This is a great case if you want to carry your e-cig assembled... I wouldn't use if for my Pilot M401 because I carry that unassembled and use a slight smaller memory card case for that. The larger cases might be usable for longer e-cigs like the penstyle. Many different and interesting styles of cases available...

Could you tell me what casr you use for your M401?

 

[SleepHater]

Nevermind, found your link .