new clear Ithaka windows and new ready wires

Status
Not open for further replies.

Itshak

Ultra Member
ECF Veteran
Verified Member
Sep 11, 2013
1,743
3,631
Israel
Thanks for the link Gobra :).

But nothing is short on GG forum we have our "expert tech" here,
without the pos of some comercial show.
So we say tanks to all those who post and share there expirience.

Without those discussion on microcoil here I would not attempt,
Make coil with loop that touching one the other,
I tried the ribbon on first place becouse of that.

We just need to figure what option are better for our personal use.
Some times one post one thing the reader get Idea or use some
other variation.

Here after few hours It's vape the best,must add it using the e juice very fast.
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
I too wanted to make a microcoil with flat ribbon wires but you were quicker than me Its! And as I see the idea looks perfect?
I had an Idea that I wanted to test in last days,so in the end I gave it a try.
wanted to try micro coil but don't have time in mid' week to make time consuming
Builds.
And as I already post few times I running some 6-8 Ithakas in parallel and figure this
kind of built wont do for me.
So I tried something different that take very short time.
First I put inside the Ithaka rebuildble the old taller nut in close position.
as I felt this will suit me more for this thing I look after.

Ribbon wire coil as micro coil or tin coil what ever this called:

I took 2 2.5mm silica wick,and made single coil on 2 wicks Imeo style.
But I round the ribbon wire loops very close to each other touching as close as I could!
Becouse it's flat it was more easy,and cover enough part of the wick.
It made 4 full loops,but to keep them very close like this I needed to make from each side
One more turn of the NR wire so the R coil won't get separate,but won't be also on top of the other.
Then I put on the mod to see how it glows.
Guys It glows from the inside and very fast and even glow.
Then I Fill e juice close the tank and baaaaam, 2 times the amount of vaper,
Without effort full flavor.
I built to more like this ( with the old nut ).
The hose is full of vapore:laugh: my wife ask me "hi what you are up to I cannot see a thing
Ha ha ha :laugh:
I told her all is fine open the window.
I never tried micro coil guys,only read your post,
But I cannot handle more vapor then this thing pumping with out adding some blowers
To the house it's like seating in a sauna,and vapor is soft without harshness.
This built take no time very easy and vape fluffy dens clouds like steam turbine,
perhaps the old center nut contribute to this performance.:)
This pre made wire suite me just fine.
It's very pleasant surprise I didn't thought this will make such a difference but it does.:)
 

Itshak

Ultra Member
ECF Veteran
Verified Member
Sep 11, 2013
1,743
3,631
Israel
Imeo

I must say after one Itaka tank it's vape magic!
it's 0 time to do,and better vape then some of the best 510 atty I tried,and I did tried few of
the very top range.
I just don't like to drip but I do like the taste.
it also wick much better in a way that know I think the wick issue is not realy a wick problem
but more of coil problem on the wick.(this flat ribbon don't tight too much but do make good contact)
with silica I get great very rich flavor just amazing.
one thing to remember,no part of the R wire shuold left without conatact the wick.
there for you must do one more turn of the NR wire.
It is a must.
and boy the old center nut,is on spot for this to stream the air in the middle of the coil.
I think better to try this any one who can ,it may be just the thing you were looking for.
(I'm gonna load my self with those wires)
again
many thanks for adding this one and put note here on that,
and to all those ravings made by members on micro coils.:)
 
Last edited:

Gobra

Senior Member
ECF Veteran
Aug 25, 2013
218
227
Romania
Hello Itshak,
but always forget to mention that you are using only the wonderful JGG (whit extremely good conductivity)making good pair with your Ithaka(s) with no kick
laugh-smile2.jpg
 
Last edited:

Itshak

Ultra Member
ECF Veteran
Verified Member
Sep 11, 2013
1,743
3,631
Israel
Yabsulutly correct Gobra.

After all day on those coils,I made 3 more for the wifei setup.
This way I able to get close to the brass JGG's.:laugh:

Any way made 3 more coil like this.
check each to see it glow from the middle,if not
Just prob the loops closer,but usually there is no need for that,if you make them very close,
from start.
I also don't cross the wicks as I want to cover more area above the old nut.
They are close in middle Becouse of the wraps,but no x .
After full 24 hours and 2 tanks I'm just amazed at how it's vape,fresh new.
No reduce in flavor at all or in vapor production.
The amount of vapor is Unbelievable with the old nut.
I take slow easy draws,single coil 1.5 ohm no direct inhale,but it still produce thick clouds
Of vapor,full of taste.
Just amazing,I ordered today 100 more of this ribbon wire from Greek seller with more parts.
Now we became addicted to parts buddy,there must be some Nic on them. :lol:
nuts and o ring and posts,some springs,some more springs,plastic this
Plastic that,freakin Caterpillar invantory lol.
 
Last edited:

Gobra

Senior Member
ECF Veteran
Aug 25, 2013
218
227
Romania
I'm upset that I can not write everything I want in English (google help me)

SETTING 3X3X3 SRL

Today I use, the best option for me so far,better flavor,vapor ,th :vapor:
3mm silica wick x 3 times not in x mode
and 3 laps with flat ribbon wires 0.5 single coil
equal SLR coil

the coil is around a 3 wick
the vapor is not hot
the mouthpiece not gets hot
liquids taste good (vg 9mg )
I had massive clouds
no burning taste
is fed normal
In this way no need for more air..
JGG handle it fine,solid contacts no kicked, CT CR works (but that in another discussion)
I dont suggest vaping super low ohms unless you know the ,,risk,,
I think that what I am veteran ,GG can and more than that
But the GG products not suffer comparisons ;)

microcoil whit cotton I tried ..not for me ,only cov :(





Do not tell anyone
I know ONLY JUST GG ,ITHAKA images (6).jpg





If your YouTube is not clear is obvious from my cloud :lol:
I feel like Bruce COV COV Beautiful-Clouds-1920x1080-Wallpapers.jpg



Sorry I joke a lot
Since I bought Ithaka i feel so :D
 

Itshak

Ultra Member
ECF Veteran
Verified Member
Sep 11, 2013
1,743
3,631
Israel
Gobra buddy,
No need to be Stephen King lol
your fun and joy are very pleasant contribute to everyone I'm sure.:)
GG forum is Babyilon 5 vape station
Place for all.

Did you cut the third wick on the middle in the atty size??
Because I don't see were els you can put one more 3 mm.

Now I'm gonna try the cotton a soon as I change wick next time.
But I intent to try it on the same micro coil ribbon that I'm running now.
It's already installed and in place and working so I'll give it dry burn,make
Sure it's keep glowing from the inside out and
And put cotton inside,one of the Ithakas.
If it work?I don't know,but I'll post here if it dose.
If it will work then I'm on the same train with micro coils and cotton,just came on board
Using different station.
 

Gobra

Senior Member
ECF Veteran
Aug 25, 2013
218
227
Romania
Gobra buddy,
I don't see were els you can put one more 3 mm..

this is a little tricky , ceramic cup is small for 3 wick ,take care not to make short,but not impossible built ..
yes I cut the third wick ,one of the top

I tried micro coil whit cotton, combination is interesting but not for me
something like this
The Just GG by IMEO with a Penelope Cotton Build - YouTube

ithaka is double slotted ceramic cup,for microcoil whit cotton ,in x mode,I put a fake wick silica 3mm under cotton wick
works and is fed well for me (whit vg and new nut)


for the Giscovery Ghannel

as I have the time
for the next set I want to figure out how to build 3mm or 4mm ekowool

I will try the second ,,genessis hibrid,,or something whit mesh buil
Starting from bish idea GG Odysseus Only Mesh, No Resistance wires needed. - YouTube

;)
 
Last edited:

Itshak

Ultra Member
ECF Veteran
Verified Member
Sep 11, 2013
1,743
3,631
Israel
Giscovery Ghannel ha ha Like that.

Ok one of the first wick I made with Boba's after 3 days became heavy wicking,
So as I said I will I made small Giscovery my self.

I took out from the bottom the rebuildable base and pull out the atty.
Cut the silica legs and dry burn the remainder of the short silica.
The with small nose plier and by nails I pulled out the rest of the silica from the ribbon coil.
Did not touch the coil just tight ever connection better and gave a dry burn.
The ribbon is soft and move very easy for the bad and the good,you just need to manipulate it
For your benefits,ha ha more easy to write the to do.
Then I thought how on earth I'm gonna stuck the cotton from there?
I found a way:
I push it using Small wood toothpick. This way I transfer the cotton little at a time
Via the ribbon coil separate to 2 different leads and work it nice with the toothpick inside
The channels.

Then with the toothpick again I repositioned the coil as I wanted and the cotton is very easy to move around,
For this matter.

Now I now I that the way I first built the ribbon micro coil on the silica is very important.
As tight and has even this will help later on to make the transfer to cotton.

To all those that seat on the fence I must say this:if you make it good it's a superior vape!

It would be nice to see Ithaka and Ody combine there wisdom... And don't want to add more then that,
I put trust in Imeo wisdom to make every vaping method available to us.:)

Ribbon pre made wire and cotton V.T.F 10/10:)
 

Gobra

Senior Member
ECF Veteran
Aug 25, 2013
218
227
Romania
Ribbon pre made wire and cotton V.T.F 10/10:)

on the same topic Giscovery Ghannel :D

if you like so much ,,the cotton ,,
in my experience cotton doesn't last very long
try insert the (organic)cotton inside the ekowool , like a sheild for the cotton
boil first the ekowool
worth trying :thumbs:
 
Last edited:

Itshak

Ultra Member
ECF Veteran
Verified Member
Sep 11, 2013
1,743
3,631
Israel
few hours with the cotton and the ribbon micro coil,
took to put in written words
what am I missing!

The TH is perfect
The wicking perfect
The taste maybe too prefect.

I took the other Ithaka with silica and ribbon micro coil opened it (from the bottom)
Rains it under water,dry it with a paper towel,and dry burn it,real good.
until all ribbon loops become blue clean,without any left overs
of what ever left over the juice usually generate from the process of vaping.
When I dry burn it I prob the ribbons coil to make sure the coil preform "micro"(glowing from the middle)
And put it back in the tank.
The all thing took 2 minutes.

Then I vape the Ithaka with the regenerated micro coil with silica wick,it vape as new.
And the Ithaka with the cotton and ribbon micro coil.

The cotton wick better taste cleaner and generate more vapor.
But I prefer the feel I got from the silica with micro coil.

It took me some hours to figure why.
It's hard to put feel in to words but I'll do my best.
So here we go: Because the wicking property of the silica it get something like a bit dry in the end of the draw
And the vapor become a bit warmer and it hit harder at the end (maybe),there is a kind of closing circle???
Crazy but that's how I feel it (or put it in words ),and the taste is less cleaner but more like I want it???
Total e crazy.
With the cotton there is a feel that the wick is always fully saturated and the vapor taste like drink???
I found my self vape 3 long draws in continuation to make the vapor a bit dry and warm,
And the TH was there all the time,I feel like I fight with it.

So so go figure.

Any way I'm glad I tried it and understand what others like about it,but for me it's missing the edge
It's more like taste liquid in drink then to vape it similar to analog,I still crave the feel(not the analog in any way),
The bit of dryness warm at the end of the draw.

So back to single micro ribbon coil on 2 wicks silica,
That once in 3 days need to regenerate like I describe.
So 2 minute build,every 3 days 2 minute clean (water and dry burn and probing the ribbons).
That's the way I do this:
Making the loops very close so they make contact one with the other and make one more turn of
NR wire on the coil to hold everything in place.


image.jpg

Put it in the rebuildable part like so:

image.jpg

Then fire it on the GG to make sure it's glow come from the middle out and not
The opposite you can see in the picture that the most glowing part is the middle:
Not the biggest picture but that what I come up for now.

image.jpg

After 2 or 3 days or more (depend on vaping) cleaning 2 minutes.

And don't get me wrong about the cotton,it's just like maybe a beer sometimes we prefer it bitter,
Taste is very complex thing.:)
 

Itshak

Ultra Member
ECF Veteran
Verified Member
Sep 11, 2013
1,743
3,631
Israel
There is no harm in boiling,and it may have some add value,
so if this your daily wick material I don't see why not,
yet there is also no fundamental information that it's unsafe
to use as it is.
So if one preffer to boil I would not advice him otherwise.
everyone should pick is preference on this matter the best it suit him.
 
Status
Not open for further replies.

Users who are viewing this thread