The biggest difference between the new version and previous version is the upgraded eGo K 1300mah battery is with constant voltage which can offer constant throat hit without stop! Voltage will not decrease while power capacity decreases!
The engraved eGo K battery is one of the most eye-catching batteries since electronic cigarettes comes into the market, Each eGo K battery is engraved with a special design. There are 8 different designs to choose from marked K1 to K8
The eGo K battery's button has a 5-click On/Off lock. Press the button 5 clicks within 2 seconds to switch between on and off.
Note: The eGo Q and eGo-K batteries have a stretchable center contact pin that may require adjustment if not making contact with your atomizer, cartomizer or clearomizer.
Too adjust:
1) Remove atomizer, cartomizer or clearomizer from battery.
2) Use small tweezers to pull center contact pin up slightly using caution not to over extend the pin.
3) Screw atomizer, cartomizer or clearomizer back on battery and use.
Recommended charger:
USB charger for eGo-K & eGo-Q Batteries.
Or chargers that are:
Threading: 510/eGo
Input: DC 5v
Output: DC 4.2v 420mA
The engraved eGo K battery is one of the most eye-catching batteries since electronic cigarettes comes into the market, Each eGo K battery is engraved with a special design. There are 8 different designs to choose from marked K1 to K8
The eGo K battery's button has a 5-click On/Off lock. Press the button 5 clicks within 2 seconds to switch between on and off.
Note: The eGo Q and eGo-K batteries have a stretchable center contact pin that may require adjustment if not making contact with your atomizer, cartomizer or clearomizer.
Too adjust:
1) Remove atomizer, cartomizer or clearomizer from battery.
2) Use small tweezers to pull center contact pin up slightly using caution not to over extend the pin.
3) Screw atomizer, cartomizer or clearomizer back on battery and use.
Recommended charger:
USB charger for eGo-K & eGo-Q Batteries.
Or chargers that are:
Threading: 510/eGo
Input: DC 5v
Output: DC 4.2v 420mA
