New Here

Status
Not open for further replies.

Kcetin20

Full Member
May 1, 2015
14
0
31
Alright i bought 2month's ago or so a Single starter - eVod for 20Euro from a shop,
Everything was fine untill 2 hours it stopped working dont know why,
I've got 2 batteries 1 from a old evod starter kit and this new one both are fully charged,
When i try to vap/smoke i dont get anything outside from it no smoke or whatever else..

Kangertech eVod Single Starter
 

DingerCPA

Vaping Mistress
ECF Veteran
Verified Member
Apr 9, 2014
9,020
61,413
Corn 'n' Cows
Welcome Kadir!

Yes, you do need to change the coils occasionally. How often depends on the type of juice you're vaping and how frequently you're vaping. Other thing to consider is that if you screw the tank down too hard, you could push the center pin (the electrical positive) too far, and when you put the tank back on after refilling, it can't touch the pin of the coil head.

You can VERY GENTLY take a toothpick to the top of the battery (inside where the tank screws onto the top of the battery) and SLIGHTLY nudge the center pin back up. DO NOT FORCE IT. I will work my way around the top of the pin - almost imperceptibly moving the center pin.

When screwing the tank on, you want it to just "catch" - don't over-tighten....
 

Kcetin20

Full Member
May 1, 2015
14
0
31
Welcome Kadir!

Yes, you do need to change the coils occasionally. How often depends on the type of juice you're vaping and how frequently you're vaping. Other thing to consider is that if you screw the tank down too hard, you could push the center pin (the electrical positive) too far, and when you put the tank back on after refilling, it can't touch the pin of the coil head.

You can VERY GENTLY take a toothpick to the top of the battery (inside where the tank screws onto the top of the battery) and SLIGHTLY nudge the center pin back up. DO NOT FORCE IT. I will work my way around the top of the pin - almost imperceptibly moving the center pin.

When screwing the tank on, you want it to just "catch" - don't over-tighten....

Yea i already tried to push the centerpin back whit both batteries but didnt work thanks for it
 
Status
Not open for further replies.

Users who are viewing this thread