New HyperTank BCC 5ML Rugged Metal Encased Pyrex Glass! SILVER, BLACK, BLUE, RED, Latticed CHROME

[dannoman]

New HyperTank BCC 5ML Rugged Metal Encased Pyrex Glass - SILVER, BLACK, BLUE, RED, Latticed CHROME

Introducing the HyperTank - An Exciting new product providing 5ML of enormous juice volume encased in a durable and clean tasting Pyrex Glass tank and Metal Quadra Windowed outer sleeve for ultimate protection! The GREAT thing about the Hyper tank is that it uses our Pro Tank heads, no special heads to purchase or to keep in stock.

• To reiterate this employs the use of Replaceable Pro Tank heads. To replace coil heads you toss the old, screw in the new one and of course, keep the base.
• The Outer metal sleeve is permanently affixed and provides four large viewing windows to see juice levels.
• Inner tank is made of Pyrex glass and will provide a nice clean taste.
• This comes with a fill instruction card but basically you fill it like you fill most BCC cartos and tanks, by unscrewing from your PV, inverting and filling upside down.
• Tank is glass with metal sleeve aluminum. It boasts stainless top and bottom caps.
• Removeable Chrome 510 drip tip.
• Comes with two coil heads - 1.8ohm (installed) and 2.1ohm

HyperTank 5ML Glass Tank : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[badkolo]

nice looking, even has the raven style

 

[Adrena]

Love mine takes me a full day between refills

 

[dannoman]

How is it tasting for you Drena?

Love mine takes me a full day between refills

 

[Adrena]

How is it tasting for you Drena?

Like a kanger Pro head, Fabualous
Nice and safe tank for my Cinnarella Nectar.

 

[JoAnnW]

I just had to get that Raven style tank. It's gorgeous! That will last me a couple of days too.

 

[woody55]

Wow, Another one I am going to have to get! That is Sweet!

 

[rdsok]

I was considering it myself until I remembered that the NET's I vape require I change ( and then clean ) the heads out at about 1.5ml-3ml worth of e-liquid

Because of that... I'm thinking about getting a Kayfun Lite or similar RBA for my NET's... after all, I haven't had to buy hardware for going on months now, just restock my e-liquid, so my vape budget hasn't been hit too hard lately.

 

[yiddleboge6]

So many new things to choose from......making it hard....I want them all...

 

[rdsok]

So many new things to choose from......making it hard....I want them all...

I completely understand... I just found a EhPro KFL clone that I couldn't ... ah... avoid...

... so I just had to reset my "last hardware purchase" setting dang it...

 

[bassmonster]

Beauty guys!

 

[harmonic]

So since this looks like it uses the same base as the Protank / Davide can you use the base part from a Davide BDC and use the aspire dual coil heads?

 

[Adrena]

So since this looks like it uses the same base as the Protank / Davide can you use the base part from a Davide BDC and use the aspire dual coil heads?

I will check my Davide, hold please
Nope the 5 ml diameter is larger for this HT than a proT/davide base.

I do not have the aspire base "yet" but I'm betting it will not fit. (JMO)
Danno will have to put those parts together to be sure.

 

[sandybeach]

I have the silver lattice one. It's beautiful. Great size for mechanicals and larger mods.
But every hit is either dry and burnt or gurgly spitty. Same issue with all the different wicks from 1.8 up to 4.0. I really wanted to like this because it is so pretty.

 

[VapingTurtle]

...
But every hit is either dry and burnt or gurgly spitty. Same issue with all the different wicks from 1.8 up to 4.0. ...

Really? With the Kanger ProTank heads??? Those are some of the best liked heads in the world right now. (I didn't know that Kanger was making anything near 4.0 ohm ProTank heads?? GotVapes carries 1.5, 1.8, 2.2, and 2.5 ohm heads.)

Sandy, who's heads are you using? What kind of PG/VG ijuice mix are you using? What kind of device and voltage are you using?

 

[Adrena]

I slapped a 2.2 Kanger in mine vaping GV's Hush (is that 70/30) at 7.5w just fine with an occasional rare tilt upside down to let air flow back into the tank to avoid airlock.

 

[dannoman]

Good tip there drena...

I slapped a 2.2 Kanger in mine vaping GV's Hush (is that 70/30) at 7.5w just fine with an occasional rare tilt upside down to let air flow back into the tank to avoid airlock.

 

[thorn]

I have the silver lattice one. It's beautiful. Great size for mechanicals and larger mods.
But every hit is either dry and burnt or gurgly spitty. Same issue with all the different wicks from 1.8 up to 4.0. I really wanted to like this because it is so pretty.

I got copper. It gurgles but I don't mind. Never a dry hit unless the juice is out. It IS HEAVY though but it looks nice, so give and take.

 

[rdsok]

I got copper. It gurgles but I don't mind. Never a dry hit unless the juice is out. It IS HEAVY though but it looks nice, so give and take.

Gurgling on a bottom coil can happen for a number of reasons... The most obvious two are thin liquids and liquids that are warm/hot which causes them to thin out... BUT the one most people don't know about is the way that they vape them... If you vape in quicker hard pulls, it will then force the e-liquid into the coil/head causing it to gurgle or even leak a bit. So... vape with a long slow pull to help avoid this latter cause of a gurgle.

 

[awsum140]

Can anyone tell me what the outside diameter of this tank is?