New Kanger Esmart Bottom Changable Clearomizer

[akovac1939]

New Genuine Kangertech E-smart Clearomizer (Bottom Changeable Coil) clearomizer. Now more cost effective with the new changeable coils!

The Kanger E-smart Clearomizers are 1.8ohm and hold a max of 1.2ml of ejuice

The clearomizer has a 510 threading, so it will fit most batteries or MODS or ego style batteries with 510/eGo threading.

The clearomizer is empty. Please fill them with High-Caliber E-liquid or Dekang E-Juice before using .

Resistance:1.8ohm
Threading:510
Packing: Simple

How to fill the cartomizer:
1. Screw off the connector base and fill in no more than 1.2ml e-liquid.
2. Carefully screw the base connector back on and clear surplus e-liquid.
3. Allow 1-2 minutes for the E-Juice to feed into the coil before you start to vaping.
4. Screw onto your battery and start vaping.

How to change Kanger E-smart Coils :
1. Carefully remove clearomizer from battery2. Hold clearomizer with tip down and unscrew base connector.3. Unscrew coil from base and replace with new one.4. Carefully screw base connector on and your ready to vape.

How to remove your BCC cartomizer from battery? Hold the bottom of the clear cartomizer when you separate it from battery. Please do not screw the cartomizer from the top or middle of the cartomizer as this may cause connector base to separate from clearomizer,
causing e-liquid to leak out.

Click here for Kanger E-smart replacement Coils!

Warranty: DOA

 

[akovac1939]

NEW KangerTech E-smart 510 BCC (Bottom Coil Changeable) cartomizer starter kits. It comes with the E-smart 510 BCC cartomizers, 320mAh batteries!

KangerTech New E-smart 510 BCC (Bottom Coil Changeable) cartomizer starter kits are a new upgraded version of the E-smart.
The E-smart 510 BCC (Bottom Coil Changeable) cartomizer differs from the old version as the bottom coils are now changeable.
Order Tips:
1. 1.2ml capicity, 1.8ohm resistance.
2. E-smart battery is 3.4V constant voltage output battery. After fully charged and before use, it might be about 4V, and after use, the voltage output should be 3.4V or a little lower.
3. It's an empty cartomizer so you still need to order e-liquids.
KangerTech E-smart 510 1.2ml empty BCC clear cartomizer/clearomizer comes with 1.8ohm resistance.
KangerTech E-smart 320mAh manual battery comes with 5-click ON/OFF protection: Generally, the battery is shipped in the off position. In off position, the battery will not function even when pressing the button. To turn on battery, press manual button 5 times within 2 seconds. You will see white LED flash. To turn off battery, press manual button 5 times within 2 second as well, the white LED will flash! "5-click ON/OFF protection" can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket!
15 seconds cutoff time! White LED!
Replacement E-smart BCC Cartomizers, E-smart BCC Heating Coil.

Each starter kit contains:
2pc 320mAh Esmart batteries with 510 threading
2pc E-smart 510 1.2ml empty BCC (Bottom Coil Changeable) clear cartomizer/clearomizer, 1.8ohm
1pc AC to USB wall adapter( US plug )
1pc 230V 500mA AC-USB adapter
1pc Instruction manual


Unit:1 Set
Ecig Size:diametter 10mm ; Length: 136mm
Battery Output Voltage: 3.4v
Battery Capacity:320mAh
Clearomizer Resistance:1.8ohm
Clearomizer Capacity:1.2ml
Threading:510
Package: gift paper box

Warranty: 30 days warranty for batteries. Only accept DOA for all other parts.