New Products

Status
Not open for further replies.

Ultra

Unregistered Supplier
ECF Veteran
Feb 19, 2009
947
111
Canada USA
www.electronic-cigz.com
Aspire Premium Kit
The Aspire Premium kit is made of an Aspire CF VV+ battery and a Nautilus Mini. Nautilus Mini: The Nautilus Mini is the next generation of tank systems. Made of stainless steel and Pyrex glass, the Nautilus Mini uses the Aspire “BVC” (Bottom Vertical Coil) atomizer technology. CF VV+: The Aspire CF VV+ is high-end vaping power system. This battery features stainless steel endpoints, a metal button, and a carbon fiber coated tube. The Aspire CF VV+ battery contains a revolutionary spring connector. This unique technology ensures that there will always be a strong connection between the battery and e-cigarette tank.

Aspire Premium Kit Includes:
1- Aspire CF VV+ 1000mah Battery
1- Aspire Nautilus Mini Tank
5- Aspire Nautilus Mini spare Coils - 1.8ohm
1- USB charger
1- A/C adaptor
1- User's Manual
1- Gift Box​


View attachment 387260
Aspire Premium Kit - $79.99
 

Ultra

Unregistered Supplier
ECF Veteran
Feb 19, 2009
947
111
Canada USA
www.electronic-cigz.com
Innokin EVOLV iTaste SVD2.0 Kit
The Innokin iTaste SVD (Superior Vaping Device) 2.0 is a ground-breaking alliance of Innokin and Evolv. This new SVD2.0 is powerful, beautiful and ultra-intelligent . It boasts on the power and precision of the Evolv Experience™ Microchip. SVD 2.0 can deliver high power of 20watts and can fire on resistance as low as 0.5 ohms, the addition of this new microchip gives versatility and control like no other Innokin product so far. This new advanced personal vaporizer is very handy design and can be controlled by three button on it with LCD on side.This will define a new class for vaping. With more power, more intelligence, more control and more durability than the original iTaste SVD, the upgraded SVD 2.0 is a must have for vapers looking for the best combination of intuitive technology and ergonomic design.

The iTaste SVD2.0 comes in a attractive, and handy zip travel case that doubles as a Battery Power level checker, so if you ever find yourself out and about, you'll never have to wonder about your battery levels again!

Innokin EVOLV iTaste SVD2.0 Kit Features:
  • Input Voltage: 3.2~4.3V
  • Output Voltage: 2.0~6.3V
  • Maximum Output Current:6.0A
  • Maximum Output Wattage:5.0‐20W
  • Resistance of clearomizer:0.5 ‐3.0 ohm (0.5 Ohm minimum)
  • Battery: IMR high drain 18350/18650 (without protection, maximum current > 5000mA.)
  • OLED display
  • Variable Wattage can be adjusted in 0.1W increments
  • Variable Wattage from 5.0W - 20W
  • Includes tubes for fit with 18650 and 18350 batteries
  • Step Down Technology
  • Reverse Polarity Protection
  • Short Circut/ Atomizer Protection
  • Over Temperature Protection
  • 510 Threaded Head, and eGo Threaded Heads


Innokin EVOLV iTaste SVD2.0 Kit Includes:
1- Innokin EVOLV iTaste SVD2.0 Mod Body
1- 510 Threaded Head
1- eGo Threaded Head
1- 18650 battery Tube
1- 18350 battery Tube
1- Battery Cap
1- iTaste SVD2.0 Travel Case with Battery Power level checker
1- User's Manual
1- Gift Box​


View attachment 387261
Innokin EVOLV iTaste SVD2.0 Kit - $98.99
 

Ultra

Unregistered Supplier
ECF Veteran
Feb 19, 2009
947
111
Canada USA
www.electronic-cigz.com
NEW - ProVape ProVari P3
Introducing - the new - ProVape ProVari P3, the premium US-made MOD. The ProVari 3 is a powerful microprocessor controlled PV that lets you adjust and fine tune the device to your exact preferences by adjusting the power (in voltage or wattage), along with a number of great new features never before seen.

ProVari - Silver - USD$249.95
ProVari - Polished Silver - USD$269.95
ProVari - Black - USD$269.95​

Innokin EVOLV iTaste SVD2.0 Kit Features:
  • Variable Voltage: 2.9 – 6.0 in 0.1 volt increments
  • Variable Wattage: 3 – 20 in 0.2 watt increments
  • Adaptive Connection: Self-adjusting center contact pin for maximum compatibility with tanks
  • HotShot™ Boost Mode: Get more vapor with a programmable power boost with each puff
  • Built-in OLED Display: Built-in sealed OLED display with scrolling icon-based graphics allows you to visually adjust your settings.
  • Built-in Smart Safety Features
  • On/Off Mode
  • Reverse Battery Protection
  • Battery Monitoring
    [*}Amperage Limiting System
  • Fix Recommendation System
  • 16 Second Safety Cutoff
  • Check All Mode
  • Thermal Monitoring
  • Safe Electronic Switch


ProVape ProVari P3 Includes:
1- ProVape ProVari P3 Mod Body
1- 18650 Extension Tube
1- 18350 Extension Tube
1- User's Manual Key
1- Gift Box​


[/ATTACH] ProVariP3Banner.jpg 300X250.jpg
ProVape ProVari P3
 

Ultra

Unregistered Supplier
ECF Veteran
Feb 19, 2009
947
111
Canada USA
www.electronic-cigz.com
Introducing the E-Cigz MOD Shop!
E-Cigz has expanded their MOD lineup with new MOD prdoducts, and MOD Accessories. For those experienced Vapors looking to chase some large clouds - Come and check out the new MOD Shop!

MOD Shop - New Products
We have a whole bunch of exciting new products available. Take a look at what is new:


New - MODS
FOOTOON MODS - from Korea
The Footoon MODs are extremely high-quality Korean made MODs that are constructed from Medical-grade Stainless Steel:

VUZZLE Hybrid by Footoon
VUZZLE is a high quality, Korean built mechanical Hybrid crafted by Footoon. The VUZZLE Hybrid is beautifully made from brushed medical-grade Stainless Steel (SUS316), with butter smooth screw connections. This is a simple, easy to use mechanical Hybrid with a built in Tank and replaceable Coil, this is an excellent unit for beginners, or advanced users. The VUZZLE works with 18350 batteries, and includes a 510 MOD Cap to use the VUZZLE as a MOD.
VUZZLE Hybrid by Footoon - $184.99
VUZZLE Hybrid by Footoon - Intro Sale - $166.50



CHIP MOD by Footoon
CHIP is a high quality, Korean built mechanical MOD crafted by Footoon. The CHIP MOD is beautifully made from brushed medical-grade Stainless Steel (SUS316), with butter smooth screw connections. This is a compact mechanical MOD with a unique Firing Switch that does not use a spring or magnet! The CHIP comes with both extension tubes for using 18350, or 18650 batteries.
CHIP MOD by Footoon - $174.99
CHIP MOD by Footoon - Intro Sale - $157.50


Youde UD MODS
The Youde UD MODs are great low cost MODs with good quality:
Youde - UDT-V17 Hybrid/Mechanical MOD Oak Leaf
The UDT V17 Oak-Leaf Hybrid is an absolutely awesome and versatile device. It functions as a hybrid with a built in dripping atomizer OR as a more traditional high performance mechanical mod with a 510 connector to add your favorite RDA or tank. The UDT V17 hybrid has a great look and offers a versatile design. This one passes the "BEAST" test with flying colors! This is a great value for an authentic mod, especially considering it includes the RDA.
Youde - UDT-V17 Hybrid/Mechanical MOD - $59.99
Youde - UDT-V17 Hybrid/Mechanical MOD - Sale - $53.99



Youde UDT-V14 Mechanical MOD
The YouDe Tech UDT-V14 is a beautifully designed, high-quality mechanical mod, able to fit both 18350 and 18650 size batteries. Made with quality brass and featuring a gorgeous brushed bronze-plated body and silver plated copper pin, the YouDe Tech UDT-V14 is a great mechanical mod for advanced e-cig users.
Youde UDT-V14 Mechanical MOD - $49.99
Youde UDT-V14 Mechanical MOD - Intro Sale - $44.99


Youde - UDT-V19 Mechanical MOD
This is a affordable high quality mechanical mod from Youde UD, with stainless steel body, silver plated copper pin, butter smooth threading and 510 thread connection.Additional features such as adjustable floating pin which you can flash mount any 510 thread tanks, and top cap has been cut with 3 channels for airflow.
Youde - UDT-V19 Mechanical MOD - $49.99
Youde - UDT-V19 Mechanical MOD - Intro Sale - $44.99


Youde - UDT-V11 Hybrid/Mechanical MOD - Spell
This is an affordable high quality Hybrid and Mechanical MOD from Youde UD, with Stainless Steel/Brass Body, silver plated copper pin, butter smooth threading and 510 thread connection. This is a large MOD for 26650 Batts.
Youde - UDT-V11 Hybrid/Mechanical MOD - Spell - $69.99
Youde - UDT-V11 Hybrid/Mechanical MOD - Sale - $62.99


SALE - New RDA / RBA's
Youde UD IGO-T Titanium Rebuildable Atomizer RDA - SALE $25.19
Youde UD IGO-F Stainless Rebuildable Atomizer RDA - $17.99
Youde UD IGO-W3 Rebuildable Atomizer Stainless RDA - $19.79
Youde UD IGO-W4 Rebuildable Atomizer Stainless RDA - $16.19
Youde UD IGO-W6 Rebuildable Atomizer Stainless/Br RDA - $25.19
Youde UD IGO-W7 Rebuildable Atomizer Stainless RDA - $24.29
Youde UD IGO-W8 Rebuildable Atomizer Stainless RDA - $26.99
Youde UD IGO-W14 Rebuildable Atomizer Stainless RDA - $26.99
Youde UD AGA-T3 Rebuildable Atomizer Stainless RBA - $33.29
Youde UD AGA-T5 Rebuildable Atomizer Stainless/Br RBA - $33.29




SALE - NEW Batteries / Accessories
Nitecore D2 Digicharger - SALE - $26.99
AW IMR 18650 2200mAh Battery - BTop - 20Amp - $16.19
AW IMR 18350 800mAh Battery - BTop - 12Amp - $9.89
AW IMR 14500 650mAh Battery - BTop - 9Amp - $8.99
Efest IMR 26650 LiMn 4200mAh Battery - FTop - 20Amp - $13.49
Efest IMR 18650 LiMn 2000mAh Battery - FTop - $8.09
Efest IMR 18350 LiMn 800mAh Battery - FTop - $5.39
Efest IMR 18350 LiMn 700mAh Battery - FTop - 10.5 Amp - $6.29
Efest IMR 18650 LiMn 2100mAh Battery - FTop - 10.5 Amp - $9.89
Efest IMR 18650 LiMn 2500mAh Battery - FTop - 35 Amp - $10.79
Efest IMR 18650 LiMn 3100mAh Battery - Top - 20 Amp - $11.69
Efest Safe Charging Bags - $8.09 Small
Japanese Organic Cotton - KohGenDo 4 Pads - $3.59
Japanese Organic Cotton - Puff 5 Pads - $1.79
Vapowire Kanthal A-1 Resistance Wire - 30ft - $8.09
Vaping Coil Winding Jig Tool - TypeA - $4.95
Vaping Coil Winding Jig Tool - TypeB - $7.65
2-in-1 Ohm & Voltage Meter - $8.06
 

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
Altus Coil-Less Atomizer Tank, by Guo Vape
GUO-Altus.png
The Altus Tank by Guo brings clarity to your flavor, efficiency to your setup, and a sigh of relief to your wallet. Imagine never buy or rebuilding another coil head again.

The Altus Tank has arrived. Welcome to the future. The tank atomizer has finally transcended replacement coil heads and now requires nothing more than a 22.5mm x 22.5mm square of cotton!

Using a cutting-edge silicon valley material that was developed over two years, this tank has a CVU chip, or center vaping unit, that has been granted over a dozen patents in the United States and lasts for years. The CVU™ is a high thermo-conductive ceramic that conducts heat as fast as aluminum. Our advanced ceramic is fused with a conductive tungsten trace for a true coiless design. The state-of-the-art CVU™ is designed to conduct heat evenly and will not crack even with rapid temperature change. Its surface will not oxidize or degrade with regular use. Following proper care instructions, the CVU™ chip will last for years.

This is the cutting edge. It is also a durable and reliable product, with a one-year warranty from the manufacturer.

This material was designed for use in vaping, and is an advanced solid state heater. The CVU is safer than any wire, and within operating temperature it will run forever. The CVU is non-metallic and non-toxic, with a purer and cleaner flavor delivery than any wire currently on the market. There is no need to dry burn it, and dry burning it voids the warranty.

In essence, The CVU chip is the coil head. With far more surface area than a coil, it was engineered to heat up in a perfectly balanced way, unlike regular coils which heat up inside out, and over time, heat less of the perimeter of the coil, and more of the center. This CVU chip lasts for years.

Juice consumption will surprise you. The tank will not drain juice like super-sub ohm tanks such as the TFV4 or Mutank. The Altus tank sips juice economically and efficiently, and still provides great flavor and vapor production.

The surface of the CVU does not oxidize under 1832 degrees Fahrenheit. It can be used with temperature control functionality at up to 200 watts, and 480 Fahrenheit. It will also undoubtedly work on any regulated mod, with or without temperature control, from 25 to 75 watts.

The CVU unit has a resistance reading of approximately 0.5 ohms when it is room temperature. The terminals are gold-plated. As the CVU is heated, the resistance reading will climb up. This occurs during use and is normal. When you set your mod back down, the juice cools down the chip and the reading returns to approximate 0.5 ohms.

An instruction manual with easy to read, clear instructions with images is included. Each order also includes one Altus coil-less atomizer, replacement o-rings and cotton squares. CVU made in the United States.

Altus Tank by Guo Features Include:
  • CVU is designed, engineered and made in the United States
  • Lasts years, no more pre-built coils or rebuilding coils
  • 23mm diameter tank
  • Gold-plated terminal contacts on CVU
  • Gold-plated engraved CVU
  • AFC with tremendous airflow
  • 25-75 watt range in non-temp control mode
  • 300 – 480 F in temp control mode
  • Pyrex tank section
  • One year limited warranty from manufacturer
  • Non-toxic
  • Non-metallic
  • Safe at high temperatures
  • Temperature Control ready
  • Never buy another coil head again
  • Pure, clean flavor
  • Perfectly balanced wick heating, every time

Altus Tank by Guo Specifications:

ONLY THE BEST OUTSIDE AND IN High quality stainless steel body is corrosion resistant and protects from the high heat of the CVU™ chip inside. The CVU™ chip is an advanced ceramics metal composite that will not oxidize under 1000 C.

POWER UP IN SECONDS The cotton and chip combination creates a perfect self regulating temperature control system to reduce toxic vaping and enhance flavors. Approximately 2 seconds to warm on the first hit, then performs as fast as coiled systems.

TANK CAPACITY Holds 3.5 ml of e-liquid

PORTABLE & POWERFUL 23mm diameter, 65.3mm height



NOTES:
  • Standard 510 Connection
  • Works with most mods
  • Tastes Best with Low Power Settings

    Max Power without Temperature Control:
  • 200C
  • 30-75 watts

    Max Power with Temperature Control:
  • 175-240C with NI setting
  • 30-200 watts with NI setting
 
Last edited:

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
Kanger TOPBOX Mini Starter Kit
Kangertech-Topbox-Mini-Group.png

Kanger is proud to introduce the TOPBOX Mini Starter Kit which includes the KBOX Mini TC 75W Mod and the TOPTANK Mini. The TOPBOX Mini Starter Kit is the upgraded version of the mega popular SUBOX Mini Starter Kit. The TOPBOX Mini Kit is the perfect starter kit for vapers looking for a sub-ohm and cloud producing experience without destroying the wallet. The TOPBOX Mini Starter Kit caters to both advanced and new users with the all new temperature control and top-fill features.

The KBOX Mini TC 75W Mod can fire up to 75W and now supports temperature control with nickel, titanium, stainless, and Ni-Chrome wire. The KBOX Mini TC 75W Mod requires (1) high amp 18650 battery and has a magnetized battery cover for easy and convenient access.

The TOPTANK Mini is the upgraded version of the ever popular Subtank Mini. The TOPTANK Mini now offers a top-fill option for easy e-liquid refills. The TOPTANK Mini also now supports the new SSOCC atomizer heads which allows for more airflow, vapor, and flavor. The Kanger Mini RBA Plus Deck is also included for advanced users who like to build their own coils.



Kanger KBOX Mini TC 75W MOD Features:
  • Dimensions: 3-1/4"L x 1-1/2"W x 7/8"D
  • Spring-loaded 510 Contact Pin
  • Wattage output: 7-75W
  • Temperature Control : Ni / Ti / SS / Ni-chrome
  • Temperature Control Range: 100 - 300C / 200 - 600F
  • Minimum Resistance: 0.1 ohm
  • Requires (1) High Amp 18650 Battery (not included)
  • Display Screen
  • Micro USB Port
  • Magnet battery cover for easy battery access
  • 10 second cut off safety feature
  • Short circuit protection
  • Open circuit protection
  • Magnet battery cover
  • Low battery warning

Kanger TopTank Mini Tank Features:
  • Dimensions: 2-1/2"L x 7/8"D (Including Tip and Threads)
  • 22mm Diameter
  • 510 connector
  • 4.0ml e-Liquid Capacity
  • New Top Fill Feature
  • Glass Tank
  • Adjustable Airflow Valve
  • Compatible with the new SSOCC Atomizer Heads
  • (3) SSOCC Atomizer Heads Included
  • Mini RBA Plus Deck Included
  • 510 Drip tip compatible

Kanger SUBOX Mini Starter Kit Includes:
  • 1 x KBOX Mini TC 75W MOD
  • 1 x TopTank Mini
  • 1 x 0.15ohm SSOCC Ni200 Coil (TC) Atomizer Head (Pre-Installed)
  • 1 x 0.5ohm SSOCC Atomizer Head
  • 1 x 0.5ohm SSOCC Clapton Atomizer Head
  • 1 x Mini RBA Deck Plus
  • 1 x Micro USB Cable
  • 1 x Set of Screws
  • 1 x Screwdriver
  • 1 x Prebuilt Micro Coil
  • 1 x Cotton Pad
 
Last edited:

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
Wotofo Clapton Comp Wire - 5-Pack
wotofo-clapton-comp-wire-5-pack-11.jpg
Comp Wire by Wotofo are precoiled exotic coils that eliminate the time consuming hassle of wire configurations and provide the convenience of ready built coils that simply need to bet set, adjusted, and wicked. Wotofo Clapton Comp Wire comes in an a resealable tube that holds 5 prebuilt coils, allowing for easy transportation while providing adequate protection to throw into your carrying kits. Comp Wire by Wotofo is a easy and simple answer in using advanced styled coil configurations in your RDAs and RTAs!

Wotofo Clapton Comp Wire - Specs/Features:



    • 5- Pack Tube pre-built Clapton Wires

Wotofo Clapton Comp Wire - Types:



    • Clapton Wire - 0.32mm, 24+30G, 0.55ohm



    • Clapton Wire - 0.5mm, 24+28G, 0.5ohm



    • Clapton II Parallel Wire - 2x0.32 + 0.2mm, 28+32G, 0.5+0.05ohm



    • Clapton III Wire - 0.32+0.2mm, 0.3+0.05ohm

Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
 
Last edited:

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
Innokin Endura T18 Kit
Innokin-Endura-T18-Group.png
The Innokin ENDURA is Perfect for Beginners. Great for Vapers ! Optimized Power Output and Tank Design deliver Amazing Flavor and Vapor!

Long Lasting, Easy to Charge 1000mAh Battery with built in overheat & Safety Protections.

Easy to Top-Fill 2.5ml Tank made with Top Quality Stainless Steel & Pyrex Glass!

Simply fill with your favorite eliquid, Click the button and get ready for a Great Vape!

The Innokin ENDURA is the ultimate smoking alternative that delivers a superior experience in a compact, durable and affordable all in one kit.

Crafted with top quality materials, the Innokin ENDURA is a 1 button, easy to fill & easy to use affordable advanced personal vaporizer that is durable, compact and stylish.

Optimized at 14 Watts with 1.5Ω replaceable coils, the ENDURA delivers a perfect vaping experience every time. The ENDURA T18 Pyrex and Stainless 2.5ml Tank is top-fill for quick and clean refills and the Japanese organic cotton wicking material delivers maximum flavors from your favorite eliquids.

Advanced integrated safety protections guard against overheating and over discharge and greatly improve charging safety and overall reliability.

With 1000mAh of real battery capacity, it can be conveniently charged via standard Micro USB cable and features Innokin’s ‘Vape While Charging’ technology for a daily vaporizer that you can rely on.

The Innokin ENDURA is an all in one vaporizer solution that is beautifully packaged (24mm thick) and includes the ENDURA battery, Prism T18 Tank, Replacement Coil, Micro USB cord, and Vape Stand. Contact your favorite Innokin Sales representative today for more information and to order the new Innokin ENDURA complete vaping kit.

Innokin Endura T18 Kit - Features:



    • 15 second cutoff: If the button is held for 15 seconds or longer the ENDURA T18 Personal Vaporizer LED lights will flash and than stop firing until the button is released and pressed again.



    • Over-charge Protection: 4.5~6.0V, charging current 420mA.



    • Overheat Protection: The red LED will blink 3 times if the PCB is overheated



    • Low Voltage Warning: The Red LED will blink when the battery capacity is lower than 3.3V and the ENDURA T18 Personal Vaporizer will automatically power off.



    • Short Circuit/Atomizer Protection: Short Circuit/Atomizer Protection protects the ENDURA T18 Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions. The ENDURA T18 Personal Vaporizer features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 1. 2 Ohm, the LED will stay on 5 seconds and the ENDURA T18 Personal Vaporizer will not power on.



    • Over-Discharge Protection: The ENDURA T18 Personal Vaporizer monitors the battery voltage and will automatically power off when the battery over discharged.



Innokin Endura T18 - Specs:



    • Battery: 1000mAh, 7C continually



    • Standby current: 10 uA max



    • Maximum output Wattage: 14W



    • Maximum output Current: 3.5A



    • Maximum output Voltage: 5.5V



    • Clearomizer Resistance: 1.2 ~ 2.5Ohm



    • Charging: Micro USB DC5V/1A



    • Over-charge Protection: 4.5~6.0V, charging current 420mA



Innokin Endura T18 Kit Includes:




    • 1 x Innokin Endura T18



    • 1 x USB charger cable



    • 1 x eGo Threading Adaptor



    • 1 x User Manual
 
Last edited:

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
Aspire Cleito Sub Tank Set
Aspire-Cleito-Full-Box.png
Introducing the Cleito from Aspire. A sub ohm tank that is more than the sum of its parts. With an all new coil that replaces the standard chimney and delivers maximized airflow and vapor production. The Cleito is made of stainless steel (304) with a Pyrex glass tube and a wide bore Delrin drip tip, which is made of imported food grade Delrin . The Cleito is also compatible with standard 510 drip tips. Cleito cuffs come in four different colors. These cuffs help to dissipate heat and allow you to color coordinate with your mod or use them as a visual que to remind you which juice you have in your tank. The Cleito uses a revolutionary new coil design that frees up even more restriction in the airflow by eliminating the need for a static chimney within the tank itself. This results in an expanded flavor profile and increased vapor production. Combined with a claptonized kanthal coil for maximum flavor. Our all new Cleito atomizers are designed to deliver a rush of intense flavor with a broad profile. The minimum cross section of the airflow is 25.5mm², this design facilitates massive vapor production.

Aspire Cleito Sub Tank Set Features:

• Top Fill - Simply unscrew the top hardware,just squirt your favorite juice into the tank.

• Dimensions: 58mm x 22mm

• 22mm Diameter

• 510 Threaded

• 3.5ml liquid Capacity

• Glass Tank

• Convenient Top Fill design

• 510 drip tip compatible



Aspire Cleito Sub Tank Set Includes:
1- Aspire Cleito Tank

1- Replacement Glass Tube

1- Vape Band

4- Rubber Cuffs

1- Replacement Coil



Notes This tank uses a sub-ohm resistance atomizer. It will only work on a mechanical mod or a mod capable of 30 watt or higher. You must be sure that your mod AND batteries can handle SUB OHM coils. If you're using an electronic mod, make sure it can handle the amps. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe!

Warning: Risk of battery Explosion! Ni 200 is designed for use only with devices equipped with circuit boards capable of controlling coil temperature, such as DNA 40 Mods. Do not use this product with any other devices.

Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.
 
Last edited:

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
VaporShark® DNA 200
Vaporshark-DNA200.png
Clouds, Technology, Clouds.

Our long awaited DNA 200 is everything you've been looking for in a mod. Sleek, pocket friendly, powerful and completely customizable. Unlike the DNA and rDNA, the DNA 200 is made out of 6031 aluminum, making it lighter than it's predecessors. The finish starts with a black anodization process, followed by black paint and then a light rubberized coating completes the process. Truly our most durable finish to date. Zip Charging is on board to make sure charging is done in a flash when plugged in to a 2A power source. No one likes waiting for their batteries to charge. The DNA 200 is powered by a 3 cell 10 Watt hour lipo pack. One of the best features of the DNA 200 is Escribe. Escribe is a controlling interface software capable of over 93 customizable options. What this means to you is you can finally dial in your perfect vape. There are 8 customizable profiles that allow you to save your settings for a variety of builds ranging from your standard coils to most complex. Lastly, your DNA 200 will always be up to date with USB upgradeable firmware. You asked, we listened, this is the last mod you'll ever need.

VaporShark® DNA 200 Features:
  • Dimensions 89.10mm x 48.10mm x 23.90mm
  • CNC Aluminium Construction
  • Zip, High Speed Charging (90 Minute Charge Time)
  • 10 Watt hour, 3S Lipo Battery
  • Step Paint Process. (Anodized Black, Oxidized Paint, Rubberized Finish)
  • User Serviceable Battery Bay
  • Gold Plated, Spring Loaded Center Pin
  • Illuminated Fire Button
  • Large Screen OLED Display
  • Firmware Upgradable

Warranty: 120 Day Warranty from Mechanical failure. (Doesn't include batteries/atomizers)



NOTE: Use special caution when working with Li-ion or Li-MN cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous. Please note that while using two batteries in series (stacking) can increase chance of battery failure. If you decide to use this setup, please know that this is a USE AT YOUR OWN RISK and is not recommended by electronic-cigz.com

Read the information found at: Battery University before purchasing. It is important to carry batteries properly, recharge properly, and dispose properly.
 
Last edited:

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
upload_2016-4-20_11-20-44.png
Wismec Reuleaux Evolv DNA 200
Reuleaux, powered by DNA200, becomes the new highlight of Wismec. The unique exterior design and advanced temperature control technology make it stand out from others. In addition to the magnetic back cover which matches well with the body, the high power output of 200w will make you own a wonderful vaping experience.

Origin of the name “Reuleaux”: the first e-cigarette with 3 replaceable cells; the unique structure consisting of three separate shells; DNA200 technology, famous designer Jay Bo and Wismec brand combined.

Wismec Reuleaux Evolv DNA 200 Features:
  • Unique Exterior Design: Its irregular and unique appearance benefits from the structure of 3 replaceable battery cells, which makes it feel great in your hand. (Recommend: high-rate 18650 cells, such as Sony 18650 VTC4)
  • Reverse Polarity System for Batteries: If installed improperly, the plastic hoop will prevent the battery touching the opposite contact head.
  • Temperature Protection: powered by DNA200: Reuleaux requires a heating coil made from Nickel 200 or other materials with a well-defined temperature coefficient of resistance, rather than Nickel Chromium or Kanthal alloys when using in TC mode. Appropriate temperature settings will reduce the breakdown of flavoring and base liquid components.
  • 200 Watt Variable Power: The maximum output power can reach 200w, which will bring you a wonderful vaping experience.
  • Stainless Steel Thread and Spring Connector: The stainless thread makes the device much wear-resisting and the spring connector greatly increases its adaptability.
  • Charging: You can take out the lithium-batteries from the device and then charge the cells. Moreover, it can also be charged via USB cable.


Wismec Reuleaux Evolv DNA 200 Specs:
  • Dimensions: 50.0mm x 40.0mmx 84.0mm
  • Designed by Jay Bo
  • Powered by the Evolv DNA 200 Chip
  • Ni200 (Nickel) Temperature Control Mode/Wattage Mode
  • Optimized Heat Dissipation Design
  • Spring Loaded 510 Contact Pin
  • Stainless Steel Threads
  • Magnetic Battery Back Cover
  • 0.91 inch OLED Screen
  • Variable Wattage Range: 1.0W - 200.0W
  • Temperature Adjustment Range: 100-300°C / 200-600°F
  • Requires (3) High Amp 18650 batteries (Sold Separately)
  • **All (3) batteries must be the same brand and model. Discharge and recharge the (3) batteries together for maximum efficiency**
  • **We recommend an external charger for optimal charging**
  • Eight Customize able Profiles
  • Upgradable Firmware
  • Reverse Polarity Battery Protection
*Please note: Temperature control requires the use of nickel, titanium, or stainless coils.
 

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
dotmod-petri-v2-rda-2.jpg

Petri V2 RDA by DotMod Inc.
Designed by DotMod Inc. in San Diego, CA the newest version of the DotMod is here! DotMod Petri is the original Two-Post atomizer and the Petri V2 is back and better than ever before.

The Petri Atomizer by DotMod Inc. is a beautifully made easy drip three-piece atty design made of hard anodized aluminum that features an innovative two-post design. DotMod Inc. has made a revolutionary move to incorporate a peek insulator onto the entire deck. The Petri Atomizer also features 2 large holes in each post for streamlined building, while large head screws make securing wire a breeze. DotMod's signature logo is featured prominently on the sleek sleeve. Gold plating ensures high conductivity while providing a brilliant and visually striking sheen. Beauty and innovation, a hallmark of DotMod Inc.

Features:
  • 24k Gold-Plated brass deck
  • Postholes - 2mm height and 3mm wide
  • Beautiful hard anodized aluminum barrel and cap
  • Entire deck is made of PEEK
  • Custom machined knurled screws
  • Easy drip three piece atomizer design
  • Large Juice Well
  • V2 Petri drip tip included
 

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
kangertech-dripbox-starter-kit-2.jpg
KangerTech DripBox Starter Kit
Kangertech is once again setting a new trend in vaping technology with the Kanger Dripbox Kit. The Dripbox Kit features the "squonker" design or also known as a bottom feeder to provide a convenient dripper experience without the hassles of dripping. The Subdrip RDA features a juice delivery mechanism at the bottom of the 510 threads which allows e-liquid to saturate the cotton. E-liquid is simply squeezed/refilled using the e-liquid bottle located at the bottom of the device to saturate your cotton and is now ready to be vaped for massive flavor.

The Dripbox Kit features the Subdrip RDA and a Dripmod device all together in one convenient kit. The Subdrip RDA features 0.2ohm cotton drip coils which are easily replaced or can be rebuilt to your own personal preferences. The Subdrip RDA can also be filled from the top as well. The Dripmod device fires at a constant 60W and has a incredible capacity of 7ml due to the bottom feeding design. The Dripmod requires (1) 18650 High Amp Battery (sold separately) and features a Micro USB charging port.

The Dripbox Kit is matched with an incredible budget friendly price catering to all types of people. The Kanger Dripbox Kit is perfect for vapers looking to get that incredible dripper flavor without the hassles of constantly dripping and redripping.

NOTE: The Subdrip RDA and Dripmod device are not compatible with other devices or tanks due to the juice delivery system. Using other types of device or tanks may cause juice to flow down which may damage your device or battery.

KangerTech DripBox Starter Kit Features:
  • Dimensions: 4-1/2" x 1-3/4" x 7/8" (Including Subdrip RDA)
  • Includes the Subdrip RDA and Dripmod
  • 22mm Diameter
  • Bottom Feeding Design
  • Juice Delivery System
  • May also be Top-Filled
  • Wattage Output: 60W / Voltage Output: 3.7V
  • Minimum Resistance: 0.2ohm
  • 7ml e-Liquid Capacity
  • Use pre-built 0.2ohm drip coils or build your own
  • Adjustable Airflow
  • Subdrip RDA - Stainless Steel Casing
  • Dripmod - Aluminum Casing
  • Requires (1) 18650 High Amp Battery (Sold Separately)
  • Micro USB Charging Port
  • Low Resistance Protection
  • Reverse Battery Protection
  • Low Battery Warning Indicator


KangerTech DripBox Starter Kit Includes:
  • 1 x Kanger DripBox 60W Squonk Kit
  • 1 x Extra 7ml Squonk Bottle
  • 2 x Prebuilt 0.2 ohm SUBDRIP Build Decks (1- Installed)
  • 1 x Japanese Organic Cotton Pad
  • 1 x Micro USB Charging Cable
  • 1 x User Manual
 

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
smok-tfv4-sub-ohm-tank-full-kit-2.jpg
SMOK TFV4 Sub Ohm Tank - Full Kit
The SMOK TFV4 Tank is a game changing Sub Ohm Tank, and is taking the Cloud Chasing world by storm! The TFV4 features patented Sub Ohm Coils Heads; Triple Coils, Quadruple Coils, and and a single RDA Deck giving you a true cloud chasing experience out of a sub ohm tank. The TFV4 features a Top Fill hole where the top cap is placed on a simple hinge for easy refills.

SMOK TFV4 Sub Ohm Tank - Full Kit Features:

• Patented Quadruple and Triple Coil

• 24.5mm diameter / 70mm height

• 5.0ml eLiquid capacity

• 510 threaded connection

• Stainless steel construction / Glass Tube

• Top Fill design

• Adjustable airflow control system • 4 air slots on Drip Tip • 4 air slots at Bottom

• Interchangeable coil heads

• Double-layered drip tip



SMOK TFV4 Sub Ohm Tank - Full Kit Includes:
1- SMOK TFV4 Sub Ohm Tank

1- SMOK TFV4 Quadruple Coil Head (1.2ohm)

1- SMOK TFV4 Triple Coil Head

1- SMOK TFV4 RBA Head

1- Replacement Glass Tube

1- Refill Warning Card

1- User Manual and Spare Parts
 

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
eleaf-istick-tc200w-box-mod-2.jpg

eLeaf iStick TC200W Box Mod
Eleaf is proud to introduce the next big thing, the iStick TC200W Box Mod. Just like the Wismec Reuleaux RX200 Mod, this powerful device requires (3) High Amp 18650 Batteries (Sold Separately) to fully power the iStick TC200W device. The Eleaf iStick TC200W mod can fire up to 200 watts and supports Nickel, Titanium, Stainless Steel wire and TCR in temperature control mode. The iStick TC200W mod features a innovative streamlined shape with a metallic finish that fits comfortably in your hand. The Eleaf iStick TC200W Box Mod utilizes an innovative flip-open battery cover for easy access to your batteries. With the high wattage capability, upgradeable firmware and multiple protection features, the Eleaf iStick TC200W is sure to provide a hard-hitting vaping experience for a long time.

Please note, the Eleaf iStick TC200W requires (3) High Amp 18650 Batteries and are sold separately.

**All (3) batteries must be the same brand and model. Discharge and recharge the (3) batteries together for maximum efficiency** **We recommend an external charger for optimal charging**

eLeaf iStick TC200W Box Mod Features:
  • Dimensions: 3-1/4" x 2-1/4" x 1-1/2"
  • Spring-loaded Contact Pin
  • Stainless Steel 510 Threads
  • Variable Wattage Range: 1.0W - 200.0W
  • Temperature Control: Nickel (Ni200), Titanium (Ti), Stainless Steel (SS316), TCR Modes
  • Temperature Adjustment Range: 100-315°C / 200-600°F
  • Resistance Range for Temperature Control: 0.05 - 1.5 ohm
  • Resistance Range for Variable Wattage: 0.1 - 3.5 ohm
  • Requires (3) High Amp 18650 batteries (Sold Separately)
  • OLED Display Screen
  • Innovative Flip-Open Battery Cover
  • Micro USB Charging Port
  • Upgradable Firmware
  • Stealth Function
  • Dual Circuit Protection / No Atomizer Protection
  • Atomizer Short-Circuit Protection / Atomizer Low Alert
  • Low Voltage Protection / Temperature Protection
  • Temperature Alert / Weak Battery Alert
  • Imbalanced Alert / Check Battery Alert
  • Charge Error Alert / Check USB Alert


*Please note: Temperature control requires the use of nickel, titanium, or stainless coils.



eLeaf iStick TC200W Box Mod Includes:
  • 1- Eleaf iStick 200W TC Box MOD Battery
  • 1- Micro USB Cable
 

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
upload_2016-7-28_12-20-2.png

SMOK TFV8 Sub Ohm Tank - Full Kit
SMOKTech is proud to introduce the SMOK TFV8 Sub-Ohm tank which is the updated and more powerful version of the popular SMOK TFV4 Sub-Ohm tank. The SMOK TFV8 support unique patented SMOKTech turbo engine atomizer heads which are designed for cloud chasers looking for a high performance vaping experience. These powerful atomizer heads are designed for high wattage builds and features patented octuple, sextuple and quadruple coils for maximum flavor and vapor production. From top to bottom, the SMOK TFV8 is designed for airflow and vapor production. The SMOK TFV8 features a large heating air tube for higher airflow efficiency. The two large turbo boosted airflow slots can be adjusted to your own personal preferences. The SMOK TFV8 also features a large caliber delrin drip tip which will produce immense clouds.

The SMOK TFV8 features a beautiful stainless steel construction design with a 6.0ml e-Liquid capacity glass tank. It also features a convenient top fill feature with a large refill slot to help minimize messes. The SMOK TFV8 also has a exclusive V8 Turbo RBA (Rebuildable Atomizer) head included which features a velocity style 18mm build deck with a prebuilt clapton dual 0.28ohm coil pre-installed. The SMOK TFV8 is the ultimate choice for the cloud chasing enthusiast.

SMOK TFV8 Sub Ohm Tank - Full Kit Features:
  • Dimensions: 2-3/4" x 1" (Including Drip Tip and Threads)
  • Diameter: 24.5mm
  • 510 Threaded
  • 6.0ml e-Liquid Capacity (5.5ml with T8-V8 Atomizer Heads)
  • Top Fill Design
  • SMOK Turbo Engine V8 Atomizer Heads for Maximum Flavor and Vapor
  • Larger Heating Air Tube for Higher Airflow Efficiency
  • Turbo Boosted Adjustable Airflow Slots
  • Large Caliber Delrin Drip Tip
  • Improved e-Liquid Refill Slot for Easy Refills
  • Large Central Airflow Chamber
  • Stainless Steel Construction
  • V8 Turbo RBA Head features a Velocity Style 18mm Build Deck
  • Includes (1) Exclusive V8 Turbo RBA Head
  • Includes (1) V8-T8 0.15ohm Octuple Coil Atomizer Head
  • Includes (1) V8-Q4 0.15ohm Quadruple Coil Atomizer Head




SMOK TFV8 Sub Ohm Tank - Full Kit Includes:
1- SMOK TFV8 Sub Ohm Tank

1- SMOK V8-T8 Octuple Coil 0.15ohm Atomizer Head

1- SMOK V8-Q4 Quadruple Coil 0.15ohm Atomizer Head

1- SMOK V8 Exclusive Turbo Clapton Dual Coil 0.28ohm RBA Head

1- Replacement Glass Tube

1- Set of Spare Parts

1- User Manual
 

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
upload_2016-7-28_12-20-32.png

Eleaf iStick Pico 75W TC Melo 3 Mini Starter Kit
Eleaf which is the manufacturer of the original iStick series, is happy to introduce the Eleaf iStick Pico 75W TC Kit which includes the Pico device and the Melo 3 Mini tank. The iStick Pico 75W TC Kit which stands for Preferable, Innovative, Compact and Outstanding (PICO) offers an incredible vaping experience at a portable and convenient size. Building upon the the Eleaf iStick 60W TC, the upgraded Eleaf iStick Pico 75W not only delivers a satisfying amount of vapor at a 75W maximum output, but it also comes with the smart technology of temperature control supporting both Nickel 200 (Ni200), Titanium (Ti), and Stainless Steel 316 (SS316) coils. The Eleaf iStick Pico 75W also features Bypass and Temperature Coefficient of Resistance (TCR) modes.

The iStick Pico 75W features a device that easily fits in the palm of your hand with the ability to replace and switch out your batteries. The iStick Pico 75W requires (1) high amp 18650 battery (sold separately) which is easily replaceable with the conveniently placed battery cap located right next to the contact pin. The device may be charged and is firmware upgradeable via the Micro USB Port. The iStick Pico 75W is currently available in five different colors such as Black, White, Silver, Hot Pink and Grey to match your own personal preference.

The Eleaf Melo 3 Mini is the perfect tank to complement the iStick Pico due to it's small size. The Melo 3 Mini features a eliquid capacity of 2.0ml. The Eleaf Melo 3 is remarkably easy to refill due to the top-fill feature. The Eleaf Melo 3 Mini features an invisible adjustable airflow control valve for great amounts of vapor production. The Melo 3 Mini features a sturdy and beautiful 304 Stainless Steel construction with a glass tank. When used with the 100% pure cotton Eleaf EC Kanthal/TC-Nickel/EC TC-Titanium atomizer heads, the Eleaf Melo 3 Mini features an amazing vaping experience when paired up with the iStick Pico 75W Kit.

Note: Only 7/8" (22mm) diameter tanks will fit on the iStick Pico due to the protruding battery cap.

Eleaf iStick Pico 75W TC Melo 3 Mini Starter Kit Features:
  • Dimensions: 2-3/4" x 1-3/4" x 7/8" (without Melo 3 Mini)
  • 510 Threaded
  • Operating Wattage: 1.0 to 75.0 W
  • Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless
  • Steel 316 (SS316), TCR Modes
  • Temperature Control: 100-315 ° C / 200-600 ° F
  • Bypass (Direct Output Voltage) Mode
  • Resistance: 0.1 – 3.5 ohm in Variable Wattage/Bypass Mode
  • Resistance: 0.05 - 1.5 ohm in Temperature Control mode
  • OLED Display Screen
  • Requires (1) High Amp 18650 battery (Sold separately)
  • Micro USB Charging Port (Micro USB Cable included)
  • *External charger recommended for faster charging speeds*
  • Firmware Upgradeable
  • Ventilation Holes for Improved Heat Dissipation
  • Adjustment Buttons located on the Bottom of the Device
  • Atomizer Protection
  • Atomizer Low Alert
  • Weak Battery Alert
  • Low Voltage Protection
  • Temperature Protection
  • Temperature Alert
  • Short Circuit/No Atomizer Protection


Features and Specs for Melo 3 Mini:
  • Dimensions: 2-1/4" x 7/8" (Including Drip Tip and Threads)
  • 22mm Diameter
  • 510 connector
  • 2.0ml liquid Capacity
  • 304 Stainless Steel Construction
  • Glass Tank
  • Invisible Adjustable Airflow Control Valve
  • Convenient Top-Fill Feature
  • 100% Pure Cotton Atomizer Heads
  • Uses Eleaf EC, EC-TC Nickel, or EC-TC Titanium Atomizer heads


Note: Temperature control requires the use of nickel coils.

Eleaf iStick Pico 75W TC Melo 3 Mini Starter Kit Includes:
  • 1- Eleaf iStick Pico TC 75W Box Mod Battery
  • 1- Melo 3 Mini Tank
  • 1- EC Kanthal 0.3 ohm Atomizer head (Preinstalled)
  • 1- EC Kanthal 0.5 ohm Atomizer Head
  • 1- Spare Bag of O-rings
  • 1- Micro USB Charging Cable
 

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
upload_2016-7-28_12-21-11.png

Aspire Nautilus X Atomizer Kit
Aspire is back with the upgraded version of the legendary Aspire Nautilus. The Aspire Nautilus X represents the pinnacle of the Aspire tank/atomizer development curve. Just like the original Nautilus, Nautilus X is designed for mouth to lung users. The Aspire Nautilus X is designed to provide a premium vaping experience with increased flavor and utilizes the unique U-Tech coil technology for an all-new airflow performance. The Aspire Nautilus X features a ultra low profile design and is considered to be one of the smallest tanks available.

The Aspire Nautilus X coils are rated 1.5ohms and are rated for use at 14-22 watts. The Nautilus Aspire X coils incorporate U-Tech, the latest Aspire coil technology. Vapor flows through the U-shaped chamber and passes the Kanthal coils twice before being inhaled. This all-new airflow performance allows for unrivaled vape flavor and e-liquid taste. The Nautilus X may be easily refilled using the convenient Top-Fill option. You can drip, drop or pour your E-liquid into the Nautilus X tank and be back to vaping in no time. The Nautilus X features an adjustable Top-Airflow valve which allows you to not only adjust the airflow, but also help minimize leaks as well.

The Aspire Nautilus X is poised to transform how vapers experience flavor and hassle-free day-to-day usability. Born from the creative minds of the original global vaping pioneers; Aspire is ready to provide the best mouth to lung vaping experience with the Aspire Nautilus X and U-Tech Coil technology.

Aspire Nautilus X Atomizer Kit Features:
  • Dimensions: 1-3/4" x 7/8" (Including Drip Tip and Threads)
  • 510 Threaded
  • Diameter: 22mm
  • 2.0ml e-Liquid Capacity (TPD Compliant)
  • Mouth to Lung
  • Convenient Top-Fill Feature
  • Aspire U-Tech Coil System
  • Nautilus X Kanthal 1.5ohm Atomizer Heads
  • Recommended Wattage: 14-22 Watts
  • Glass Tank
  • Leak Resistant Cup Design
  • Adjustable Top Airflow Valve
  • Ultra Low Profile Design




Aspire Nautilus X Atomizer Kit Includes:
1- Aspire Nautilus X Tank

1- Nautilus X Kanthal 1.5ohm Atomizer Head (Pre-Installed)

1- Replacement Nautilus X Kanthal 1.5ohm Atomizer Head

1- Replacement Glass
 

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
upload_2016-9-12_11-20-46.png


Kanger EVOD PRO V2 Starter Kit
New Easy To Use - All In One Kit!! The EVOD PRO V2 from Kangertech is the updated version of the original EVOD PRO. The Kanger EVOD PRO V2 now features a high capacity built in 2500mAh battery. It also now features a large adjustable dual airflow slots located at the top of the tank. The Kanger EVOD PRO V2 is an all-in-one device similar to the Aspire Plato and Joyetech eGrip. The Kanger EVOD PRO V2 is designed for both mouth to lung style and direct lung vapers which utilizes the CLOCC atomizer heads. The Kanger EVOD PRO V2 features a one button design that is simple to use and is designed for your convenience. The Kanger EVOD PRO V2 features a built-in 4ml leak resistant cup design glass tank that is easily refilled using the top fill feature. The Kanger EVOD PRO features a slim 22mm diameter portable design that is easily held and transported. The Kanger EVOD PRO V2 is recharged using the micro USB charging port. All you require is the EVOD PRO V2 Starter Kit and e-Liquid to get started!

Kanger EVOD PRO V2 Starter Kit - Features and Specs:
  • Dimensions: 5-3/4" x 7/8" (Including Drip Tip)
  • 22mm Diameter
  • All in One Design
  • Simple One Button Design
  • Maximum Output: 30 Watts
  • Built-in 2500 mAh Battery
  • Built-in 4ml e-Liquid Capacity
  • Leak Resistant Cup Design
  • Adjustable Dual Airflow Slots
  • Top Fill Design
  • Minimum Resistance: 0.15ohm
  • Compatible with CLOCC Atomizer Heads
  • Glass Tank
  • 510 Drip Tip Compatible
  • Micro USB Charging Port
  • Short Circuit Protection
  • Over-Charge Protection
  • Over-Use Protection




Kanger EVOD PRO V2 Starter Kit Includes:
  • 1 x Kanger EVOD PRO V2
  • 1 x CLOCC NiCr 1.0ohm Atomizer Head
  • 1 x CLOCC SUS316L 0.5ohm Atomizer Head
  • 1 x Replacement Glass
  • 1 x Set of O-Rings
  • 1 x Micro USB Cable
 

Ucwatididther

Moved On
Feb 4, 2016
27
1
29
upload_2016-9-14_17-23-29.png

Indulgence Mutation X V5
Here to cater to your building needs comes the Mutation X V5 RDA by Indulgence. Do you like post-less build decks for max building space? No problem. Or do you like the easy to build Velocity style dual post design? Regardless of your preference, the Mutation X V5 will deliver with it's multi function build deck. Designed to utilize either deck by simply removing a few pieces, this is like two drippers in one. The ceramic insulator & stainless steel deck creates a high quality product with top notch materials to increase the longevity of the unit while providing a top shelf unit. The bottom airflow has been moved to the top of the dripper to force air to directly cover your coils and eliminate leakage from the deck. With newly introduced features and first class quality, the Mutation X V5 is the culmination of the Mutation X series.

Indulgence Mutation X V5 Features:
  • Stainless Steel Construction
  • Rebuildable Drip Tank Atomizer
  • 22mm Diameter
  • Multi Function Build Deck
  • Post-less Build Deck
  • Velocity Style Dual Post Deck
  • Ceramic Insulator
  • Top Airflow
  • 9 Airflow Holes Design
  • Vortex Induction Airflow
  • Wide Bore Delrin Drip Tip


Indulgence Mutation X V5 Includes:
  • 1 x Mutation X V5 RDA
  • 1 x 510 Drip Tip Adapter
  • 1 x Replacement Ceramic Insulator
  • 1 x Philips Screwdriver
  • 1 x Allen Key
  • 6 x Spare O-Rings
  • 4 x Philips Screws
  • 12 x Allen Screws (Grub Screws)
 
Status
Not open for further replies.

Users who are viewing this thread