Hi everyone,
This week we have a massive range in new releases, some are brand new to the vaping scene, some are updated versions of previous designs and some...well, let's just let them speak for themselves......
Heads Up: Next week see's the end of our financial year (31st March) so the Naked Vapour store may be unable to accept orders for a few hours around this time to allow us to stock take.
We will display a message in store if this is the case, once our counts are complete the store will resume as normal with regards to accepting your orders. Ideally we will keep the store open if possible through this time.
Archive of previous weekly newsletters - Click here
Cheers and vape on!
T3D by KangerTech
Following on from previous versions, the T3 and T3S comes the latest incarnation - the T3D by KangerTech
The T3D is similar to the T3S (S - single coil version) and as its letter designation of D implies - is now a Dual Coil version - T3D
T3D Clearomizer
NEW - BCDC
Bottom Dual Coil
iTaste VTR by Innokin
Now with Black Chrome or Jungle Green finish options!
iTaste VTR MOD
NEW by Innokin
18650 sized MOD
iTaste 134 MINI + iClear X.I & Case
Introducing the Innokin iTaste 134 MINI Variable Wattage MOD.
This is the smaller tubed option to the original 18650 sized MOD
iTaste 134 MINI
18500 or 18350 sized MOD
Variable Wattage MOD
Includes iClear X.I and Case!
iClear X.I by Innokin
The Innokin iClear X.I is similar to the iClear 30B and even uses the same user replaceable heads, the iClear X.I however, has a borosilicate glass tank section along with other asthetic design differences.
2 additional heads (3 total) are supplied with the iClear X.I
iClear X.I Clearomizer
NEW from Innokin
BCDC Glass Tank System
X.Fire Carved Twist - 1000mAh
by Vision
Produced by leading e-Cigarette manufacturer Vision, these semi-eGo/MOD styled variable voltage batteries are very similar to our twist types but with an additional twist!
X.Fire Carved Twist - 1000mAh
NEW Carved Wooden Body!
Spinner/Twist style Variable Voltage
By Vision
Airflow Control Valve
By KangerTech
Compatible with ProTank II, III & AeroTank
This part replaces the original base in ProTank II & III types to give the user control over the draw - allowing you to tighten or open up the airflow.
Airflow or draw is altered by the middle rings position over the 4 holes in the base.
For example, when the holes are mostly covered by the adjustable ring, the airflow is restricted, tightening the draw - adjust to suit your vaping preference.
Compatible with the following KangerTech products only
Airflow Control Valve
NEW - Tighten it up!
For ProTank II, III and AeroTank
ProTank III - Replacement Dual Coil Heads - 5 Pack
BCDC - Bottom Changeable Dual Coil
Suitable for use in ProTank III, T3D and AeroTank also by KangerTech.
NEW - 1.5ohm low resistance option now available
2.0ohm heads have also been restocked.
ProTank III - Replacement Dual Coil Heads - 5 Pack
NEW
5 Pack
AeroTank compatible!
eGo-C Mini 400mAh Battery - only 60mm long!
These colours are now back in stock after a lengthy absence - Black, Stainless, White, Yellow, Pink and Dark Pink. All other colours are still out of stock sorry
The eGo-C Mini 400 battery is a voltage regulated 3.7 volt eGo styled battery.
Great if you want something a fair bit shorter than your 650's and upwards. Awesome around home, being much smaller they are bit more pocket friendly.
eGo-C Mini 400mAh
only 60mm long!
3.7volt regulated!
Archive of previous weekly newsletters - Click here
Until next week, cheers from Rob, Lia and team at Naked Vapour.
Naked Vapour is New Zealand's e-Cigarette specialist.
www.nakedvapour.co.nz
Copyright © 2014, Naked Vapour Ltd, All rights reserved.
This week we have a massive range in new releases, some are brand new to the vaping scene, some are updated versions of previous designs and some...well, let's just let them speak for themselves......
Heads Up: Next week see's the end of our financial year (31st March) so the Naked Vapour store may be unable to accept orders for a few hours around this time to allow us to stock take.
We will display a message in store if this is the case, once our counts are complete the store will resume as normal with regards to accepting your orders. Ideally we will keep the store open if possible through this time.
Archive of previous weekly newsletters - Click here
Cheers and vape on!
T3D by KangerTech
Following on from previous versions, the T3 and T3S comes the latest incarnation - the T3D by KangerTech
The T3D is similar to the T3S (S - single coil version) and as its letter designation of D implies - is now a Dual Coil version - T3D
T3D Clearomizer
NEW - BCDC
Bottom Dual Coil
iTaste VTR by Innokin
Now with Black Chrome or Jungle Green finish options!
iTaste VTR MOD
NEW by Innokin
18650 sized MOD
iTaste 134 MINI + iClear X.I & Case
Introducing the Innokin iTaste 134 MINI Variable Wattage MOD.
This is the smaller tubed option to the original 18650 sized MOD
iTaste 134 MINI
18500 or 18350 sized MOD
Variable Wattage MOD
Includes iClear X.I and Case!
iClear X.I by Innokin
The Innokin iClear X.I is similar to the iClear 30B and even uses the same user replaceable heads, the iClear X.I however, has a borosilicate glass tank section along with other asthetic design differences.
2 additional heads (3 total) are supplied with the iClear X.I
iClear X.I Clearomizer
NEW from Innokin
BCDC Glass Tank System
X.Fire Carved Twist - 1000mAh
by Vision
Produced by leading e-Cigarette manufacturer Vision, these semi-eGo/MOD styled variable voltage batteries are very similar to our twist types but with an additional twist!
X.Fire Carved Twist - 1000mAh
NEW Carved Wooden Body!
Spinner/Twist style Variable Voltage
By Vision
Airflow Control Valve
By KangerTech
Compatible with ProTank II, III & AeroTank
This part replaces the original base in ProTank II & III types to give the user control over the draw - allowing you to tighten or open up the airflow.
Airflow or draw is altered by the middle rings position over the 4 holes in the base.
For example, when the holes are mostly covered by the adjustable ring, the airflow is restricted, tightening the draw - adjust to suit your vaping preference.
Compatible with the following KangerTech products only
- ProTank II
- ProTank III
- AeroTank (spare part)
Airflow Control Valve
NEW - Tighten it up!
For ProTank II, III and AeroTank
ProTank III - Replacement Dual Coil Heads - 5 Pack
BCDC - Bottom Changeable Dual Coil
Suitable for use in ProTank III, T3D and AeroTank also by KangerTech.
NEW - 1.5ohm low resistance option now available
2.0ohm heads have also been restocked.
ProTank III - Replacement Dual Coil Heads - 5 Pack
NEW
5 Pack
AeroTank compatible!
eGo-C Mini 400mAh Battery - only 60mm long!
These colours are now back in stock after a lengthy absence - Black, Stainless, White, Yellow, Pink and Dark Pink. All other colours are still out of stock sorry
The eGo-C Mini 400 battery is a voltage regulated 3.7 volt eGo styled battery.
Great if you want something a fair bit shorter than your 650's and upwards. Awesome around home, being much smaller they are bit more pocket friendly.
eGo-C Mini 400mAh
only 60mm long!
3.7volt regulated!
Archive of previous weekly newsletters - Click here
Until next week, cheers from Rob, Lia and team at Naked Vapour.
Naked Vapour is New Zealand's e-Cigarette specialist.
www.nakedvapour.co.nz
Copyright © 2014, Naked Vapour Ltd, All rights reserved.
