New style of 510 PCC - Any chance you'll be getting it?

[Tachion]

Rumor has it there is a new style of PCC for the 510, and it's a lot better than the current ones (lighter, holds more carts and 2 batts, etc).

New product electronic cigarette JSB-J510B(PCC) new product CN;GUA products

http://www.e-cigarette-forum.com/forum/joye-510/76601-new-improved-pcc.html

Any chance you'll carry this?

 

[shawnp1]

sorry i have stopped selling anything made by that manufacturer. they are full of defects etc....

 

[Sci]

You can use the 401 PCC that LiteCig carries(with a slight modification) for 510s. Look here: http://www.e-cigarette-forum.com/forum/battery-mods/54657-joye-510-m402-pcc.html
***Warning*** If you let those little silver buttons come out, it is a bear to get them back in!
I know that thread is about the 402 PCC, but they are the same thing. All you had to do to use 401s with it was drop the connector a little lower.

Of course, I'm sure that this will void the warranty...

 

[pdssoft]

Volcano's Magma PCC will charge 510 batteries, but I believe it is only autos; there is no slot for the button on manual batteries.

 

[Tachion]

You can use the 401 PCC that LiteCig carries(with a slight modification) for 510s. Look here: http://www.e-cigarette-forum.com/forum/battery-mods/54657-joye-510-m402-pcc.html
***Warning*** If you let those little silver buttons come out, it is a bear to get them back in!
I know that thread is about the 402 PCC, but they are the same thing. All you had to do to use 401s with it was drop the connector a little lower.

Of course, I'm sure that this will void the warranty...

Could you elaborate at all? The info there is kinda confusing. You just pull the insides out like he showed in the pictures, hot glue a 401-510 adapter in there, and go? Why can't you just screw the adapter on? What is this about changing the height of the battery connector?

I'd really like to get all my stuff from Litecig, since they're the best, but I want to make sure I know what I'm getting into before I order anything.

 

[Sci]

Could you elaborate at all? The info there is kinda confusing. You just pull the insides out like he showed in the pictures, hot glue a 401-510 adapter in there, and go? Why can't you just screw the adapter on? What is this about changing the height of the battery connector?

I'd really like to get all my stuff from Litecig, since they're the best, but I want to make sure I know what I'm getting into before I order anything.

If you have a 401-510 adapter, give that a try. I didn't have one at the time that was discussed. In fact, I just found out that there was one!
Don't chance screwing up your PCC. Try the adapter. The 510 battery is shorter than the 401, so it may be the perfect solution!

 

[Tachion]

If you have a 401-510 adapter, give that a try. I didn't have one at the time that was discussed. In fact, I just found out that there was one!
Don't chance screwing up your PCC. Try the adapter. The 510 battery is shorter than the 401, so it may be the perfect solution!

Looking of the webpage, it seems that adapters are maybe an inch or so long. I though they were just a small washer-like adapter, but that does not look to be the case. I'm guessing the adapter will add too much height for it to be able to work.

Oh well.

How did you end up modding it? I can't see any way to do it without an adapter!