New tanks. What wattage

[Pearce88]

Hi i have bought a few new tanks just wondering what wattage i should vape each one at.

smok tfv8 baby
Baby alien coils q2 0.4 ohm

Joytech cubis pro
0.5 joytech cubis coils

Innokin i sub v tank
0.5 innokin i sub v ohm kanthal

Aspire triton 2
Aspire triton 0.4 ohm coils bvc

Also are any of these coils temperature controlled. Thankyou

Sent from my SM-G955F using Tapatalk

 

[Tonee N]

Start out low and work your way up to the wattage that you prefer.
What others vape at might not necessarily be what you vape at.
Hth

Sent from the future

 

[Marc411]

What Tonee said, I have a SS coil in my SMM right now at .21Ω and I'm vaping it at 22 watts. Others open the AF wide and vape the same coil at 40. YMMV

 

[madstabber]

Yea like others have said it depends on airflow and preference. It can even be different depending on the juice. As far as the temp control coils, if any of them are stainless steel, ni200, or titanium then temp. Control works. Basically if it’s kanthal coils then no T.C. Only watts. Good luck and if you want a tank with factory coils that you can T.C. Then the uwell crown is perfect for you. The .5 & .25 coils are stainless which can be used in both tc and power. I’ve never used the other tc wires but S.S. Coils are great for temp control. It’s all I use. Good luck

 

[stols001]

I will agree on the wattage and raising it up slowly. There are "recommended" ratings from manufacturers on the coils but they can often be inflated and I often vape below them. You'll just need to start out about 5 watts (even if no vapor it's okay, you are priming your coil) and keep increasing in increments until you find a wattage you like (possibly by hitting it then going slightly above it, and then deciding the lower setting is best).

There are so many factors besides personal preference with regards to wattage, it's really hard to say. But, if you use this method you will have a well primed coil and start to get a sense of what will work for you. Best of luck,

Anna