new to vaping

[shawshank]

Hello fellow vapers, i am new to this kind of forum and i was given a wismec RX 200 and a griffin atomizer. I joined this forum to get to know more about the problems of using my vape, rebuilding and replacing the cotton, etc. Thanks in advance.

 

[Tommy-Chi]

Welcome to ECF!

Excellent! I just bought 2 - RX200s mods, and I'll be buying more. I think it rocks for TC from everything I've seen.

 

[bacc.vap]

Hello and welcome.

 

[BoogaWu]

Lol, when I started its was a ce4 clearly and a 900 mah ego, and unless you were going to buy a provari or lavatube for like $200 that was as good as it got. People are starting on 200 watt devices?

 

[billows]

Hello @shawshank I'm new here also.

Best to ya.

 

[K_Tech]

Welcome, @shawshank. I think you'll like that Griffin, I actually have two of the V1s and recently bought a Griffin 25 with top air flow.

Jumping right into rebuilding can be a little intimidating, but there are a lot of good "how-to" videos that can get you started in the right direction.

Lol, when I started its was a ce4 clearly and a 900 mah ego, and unless you were going to buy a provari or lavatube for like $200 that was as good as it got. People are starting on 200 watt devices?

Lol. Yeah, I started (after a few years of unsuccessfully trying to quit using cigalikes) with an Ego C-twist and a Kanger Protank 2. But hey, free is free!

 

[shawshank]

Thanks! Watching some videos now and oh yeah this is a challenge for me. I think i have to rely on my vape shop for the rebuilding. I'm starting with the cleaning though.

 

[JimZet]

Welcome, i am an RX200 and RX200S owner too favorite mod.

 

[Vaper qlder]

I'm new to the site, Hi! Nice mod, should be able to handle any atty you want. Have you considered something like an aspire nautilus, cleito ect as a transition into rebuildables? You can buy rebuildable kits with premade coils now, ive just purchased one for my cleito (too lazy these days to bother with building coils lol) and its a good middle point of the transition from disposable carto style devices to rebuildables. Good luck!

 

[BrotherBob]

shawshank,
Welcome and glad you joined.
Might like to read:
Beginner | Guide To Vaping
ECigarette Academy: Essential Need to Know for New Vapers
One Stop Reference Shop For New and Experienced Vapers
Learn About Vaping Here - Everything Ecigs - From Beginner To Advanced
Ch. 4 E Cig Battery Basics: Cig-a-Likes, Egos, and Mods – Vapex
(10) Advancing Up the Vaping Ladder with Egos and Mods | E-Cigarette Forum
(4) Good Starter Setups for a Beginning Vapor | E-Cigarette Forum

 

[Winchester]

Hi and Welcome,
I own an RX200 and I really like it. I think it's a bit heavy. I only use it at home.

 

[K_Tech]

Thanks! Watching some videos now and oh yeah this is a challenge for me. I think i have to rely on my vape shop for the rebuilding. I'm starting with the cleaning though.

I can be a challenge, but honestly, once you get the hang of it, you'll almost be able to do it blindfolded. And the deck design of the Griffin really makes it a lot easier than some of the atomizers I've run across.

 

[JimZet]

Hi and Welcome,
I own an RX200 and I really like it. I think it's a bit heavy. I only use it at home.

haha i use mine everywhere

 

[Gramdogg]

No problems, everything but unregulated mech mods have safty features for shorts and builds that are to low. Making a coil is easy, just get a coil master 25 and some 24 GA Kanthal. 6 wraps should give you a nice coil. Dry burn the coils a little and wick with organic cotton. If something is wrong your mod won't work so you really can't mess up to bad. Suggest LG or Samsung batteries.

 

[Gramdogg]

I just started building coils myself, after the first one you'll be like dang this is so easy what was I afraid of lol. 1st one ever came out perfect, so has everyone since then except a couple I cut to short. You'll only need ceramic tweezers if you want micro coils, spaced coils you don't.