New Vaper looking for a better Tank/System

[Carlos Martinez]

Hi, I've been vaping for a short while and like most have ran through all sorts of setups.

I'm currently using the vivi nova v2 setup. I thought this was going to be it for me. But I'm not really happy with it at all right now. The flavor isn't there at all. The only flavor that taste right to me is my primevaping Red Hots.

Any suggestions?

v/r

Carlos

 

[Vapoor eyes er]

Before I got into tanks I discovered the exact same issue- lack of flavor. Fairly common with all tank systems so seeing A's I DIY I add extra flavor to my juice. Also depends on your PV also- diff voltage brings out flavors differently.

 

[Carlos Martinez]

I'm using a Provari normally between 4.2v - 4.6v. Most my e-juice is Pink Spot. For example with the Grape Expectations flavor it taste great amazing even dripping but in the Vivi it taste like real light flavor almost as if it was diet.

I haven't asked yet but I will check if Pink Spot offers double flavor.

 

[baron von bubba]

I'm using a Provari normally between 4.2v - 4.6v. Most my e-juice is Pink Spot. For example with the Grape Expectations flavor it taste great amazing even dripping but in the Vivi it taste like real light flavor almost as if it was diet.

I haven't asked yet but I will check if Pink Spot offers double flavor.

have you tried dual coil cartomizers with a tank? not used my visions or vivi nova since i got some boge cartos

 

[Carlos Martinez]

have you tried dual coil cartomizers with a tank? not used my visions or vivi nova since i got some boge cartos

Do you have a particular system I should try out? I bought 1 J-Tank and a pre-cut carto but I never got it to work at all. I just got a burnt taste and quit it.

 

[Kay1959]

Nothing is going to replecate dripping except maybe an atty tank. There are a few of these out now, and I know for a fact that there are more in the making.

Firstly, there's the reactor tank from nhaler....

Reactor

Then there's Zen's tank at House of hybrids....

Z-Atty Rebuildable Atomizers

Zen's are expensive but they are rebuildable. He's also working on one specifically for the Provari, but the Z-Atty-U will work on the Provari.

I personally have made my own atty tank using a Phiniac tank, the atty used in the reactor tank and a universal drip tip from Cherry Vape....

Drip Tips | Universal |306 | 510 | Cherry Vape

 

[Motoman101]

I also have a provari. Got a tank from Phiniac tanks. They are the best check them out. The difference between drinking beer out of a can or a bottle. love my provari tank is amazing

 

[dumwaldo]

Nothing is going to replecate dripping except maybe an atty tank.

JMHO...
a good bottom feeding mod does. its just like dripping only from the bottom of the atty not the top.

every day when i get up i look at my desk and pick between a kicked reo grand, a kicked vmod xl or a variable voltage ali'i.

 

[ShogaNinja]

http://www.e-cigarette-forum.com/forum/new-members-forum/313896-two-easy-ways-improve-vapor-your-vivi-nova-v2-tank.html

Also, if you are that concerned why not make your own genesis? Steeljan has a nice video on how to do it for 20 bucks or less in about 20 minutes. DIY Ego Genesis Tank Ecig Mod - YouTube

Good luck learning to build stainless steel wicks. Some people have a heck of a time getting them going.

 

[Iguanodon]

On the subject of Genesis atomizers, I just recieved my DID from Greece (massive thread about this in the supplier's forum). I've only been using it for few hours and I need to tune it to get more vapour but the flavour is immense. I am thinking of diluting the liquid that I usually use in my Vivi-nova as the taste is too strong.

 

[Stadanko]

Lurker. Just finally joined. Moved from ego to Provari this week. What a huge difference. I was wondering about the Z-Atty for Provari. I would buy the -U if I new what type of adapter I might need if any.

Nothing is going to replecate dripping except maybe an atty tank. There are a few of these out now, and I know for a fact that there are more in the making.

Firstly, there's the reactor tank from nhaler....

Reactor

Then there's Zen's tank at House of hybrids....

Z-Atty Rebuildable Atomizers

Zen's are expensive but they are rebuildable. He's also working on one specifically for the Provari, but the Z-Atty-U will work on the Provari.

I personally have made my own atty tank using a Phiniac tank, the atty used in the reactor tank and a universal drip tip from Cherry Vape....

Drip Tips | Universal |306 | 510 | Cherry Vape

 

[water4choc]

Nothing is going to replecate dripping except maybe an atty tank. There are a few of these out now, and I know for a fact that there are more in the making.

Firstly, there's the reactor tank from nhaler....

Reactor

Then there's Zen's tank at House of hybrids....

Z-Atty Rebuildable Atomizers

Zen's are expensive but they are rebuildable. He's also working on one specifically for the Provari, but the Z-Atty-U will work on the Provari.

I personally have made my own atty tank using a Phiniac tank, the atty used in the reactor tank and a universal drip tip from Cherry Vape....

Drip Tips | Universal |306 | 510 | Cherry Vape

Kay - I am very interested in getting an atomizer tank for my Provari. I use Phiniac tanks and kind of like your idea of using the Reactor atty in the Phiniac tank - have you experienced leaking with that setup?

 

[northerninfidel]

Try a vision stardust....it might be the ticket for you

 

[Kay1959]

Kay - I am very interested in getting an atomizer tank for my Provari. I use Phiniac tanks and kind of like your idea of using the Reactor atty in the Phiniac tank - have you experienced leaking with that setup?

No I have not. It works quite well! I have noticed that I have to prime the tank alittle more than with a regular carto. When my flavor gets alittle off, I take some drags without hitting my power button, to get more juice into the atty. This seems to work quite well. Edited to add: You will need to get that type of drip tip, otherwise the atty will be too short. That drip tip goes down into the tank a ways, but I've not had any leaking out of the top of the tank, even when I lay the tank on it's side (that's the way I store my tanks BTW)

And to the other person who asked about using the Zen U, no, you should not need any type of adapter.