New Wood, Acrylic and Tru Stone Drip tips

[Jimblob]

Another drip tip beauty arrived today. Perfect for my WA and Bliss that arrived along with it

Thanks Brett. Very happy

 

[LongHaul]

Even looks good upside down

 

[Jimblob]

Yeah I know. Its windows 8. The pic resizes itself for me to see but when I upload it anywhere its all over the place.

Should have sorted it now though. Put it on photobucket instead.

Thanks

 

[LongHaul]

Yeah I know. Its windows 8. The pic resizes itself for me to see but when I upload it anywhere its all over the place.

Should have sorted it now though. Put it on photobucket instead.

Thanks

Lol winblows for the fail

 

[kiba]

Question: the have a kind of metal tube inside, is this normal ?

yup.

I think I am ok, might have sprained my thumb and have a goose egg on my head. What is a flux capacitor? I might have seen one in those stars floating around my head.

have you never seen back to the future??

Well it tooks two weeks, but worth the wait, and the 4am wake up thank you brett.

View attachment 149001View attachment 149002

ZOMG, so you are the one who got that turqoise one, lol, awesome bullies there my friend. how do you like squonking btw? been thinking about trying a reo for out n about.

Ya......special ed

i dunno why that reminded me of this, lolz

 

[Sosko]

i ordered the vmod when vapage had the 50% off and stashed it, had a provari with a zen and a phiniac carto tank, one day i just took it out of the drawer and was hooked, sold the provari and zen, and till this day im using the vmod exclusively, actually ordered a reo recently, the vapage hybrid atomizer is awesome. and also trying to score an ERA.

 

[DukeBlue]

Since there’s no sale tonight here’s most of my collection of Bulli tips.
Sorry for the quality, I need to work on my pic taking skills LOL.

 

[rosesense]

And there sit about half the ones I tried for and didn't get.......

Since there’s no sale tonight here’s most of my collection of Bulli tips.
Sorry for the quality, I need to work on my pic taking skills LOL.

 

[Fisty]

Too bad the spider isnt a little closer to the render....I hope my Blue Dragon is spot on to the render, that would be awesome.

Yeah.. I had the fortune (misfortune?) of managing a Things Remembered store for a couple years. The engraving machines they have do round things really well, they rotate the object as it goes along. I didn't know when I designed the spider that face could only do flat engraving, thus limiting the engraving to a single face or about 1/3 of the total circumference of the the tube. All designs I've made since have taken that into account. The flowery one gets around it with a clever trick that you'll see if you look at it closely enough. But the dragon will look very close to the render.

 

[therealcmac]

Yeah.. I had the fortune (misfortune?) of managing a Things Remembered store for a couple years. The engraving machines they have do round things really well, they rotate the object as it goes along. I didn't know when I designed the spider that face could only do flat engraving, thus limiting the engraving to a single face or about 1/3 of the total circumference of the the tube. All designs I've made since have taken that into account. The flowery one gets around it with a clever trick that you'll see if you look at it closely enough. But the dragon will look very close to the render.

Looking forward to getting it! Will be my first iHy, the first of many I hope

 

[kiba]

Yeah.. I had the fortune (misfortune?) of managing a Things Remembered store for a couple years. The engraving machines they have do round things really well, they rotate the object as it goes along. I didn't know when I designed the spider that face could only do flat engraving, thus limiting the engraving to a single face or about 1/3 of the total circumference of the the tube. All designs I've made since have taken that into account. The flowery one gets around it with a clever trick that you'll see if you look at it closely enough. But the dragon will look very close to the render.

meh, i dont see it. All of your designs that ive seenlook amazing to me just like the renders.


• sent from a dumb iphone so please excuse errors/mishaps

 

[kiba]

Oh btw, lh i checked out that mac hybrid today, i actually really like it i can see why you want it, i actually appreciate the rough prototype design, the only thing is i wish i could check out the button, i used to be a mechanic and my left pinky (vaping hand) was smashes and broken when a transmission fell off the chain and i didnt have time to get my hand out from under it, so the last two fingers on that hans dont really work too well to have to articulate it like that, i really like the top cap and design of the wick/coil area though, i guess ill just wait to see what other ppl say about the button and maybe get in on the second run.


• sent from a dumb iphone so please excuse errors/mishaps

 

[rosesense]

All are amazing, Fisty. I loved your rendition of the spidey so much. Alas, can't buy them all

 

[Fisty]

meh, i dont see it. All of your designs that ive seenlook amazing to me just like the renders.

The two that have been released so far have had differences.. The Pluid edition Phr0stbyte added more internal detail to the gas mask and it turned out looking better than the design I used for the render. On the spider the web is much smaller to fit on the single face of the tube, in my render it wrapped around over 1/2 the tube circumference. It is a pretty big difference. I still think it looks awesome, just different. But I try really hard to get as close as I can to how they'll actually look.. ones in the future will be exceptionally close now that I know how his equipment works and the limitations he faces with it.

 

[RippleInStillWater]

You do nice stuff, Fisty.....

Nice tips, blue, that one on the middle iHy is just what I'm lloking for!!!

 

[kiba]

The two that have been released so far have had differences.. The Pluid edition Phr0stbyte added more internal detail to the gas mask and it turned out looking better than the design I used for the render. On the spider the web is much smaller to fit on the single face of the tube, in my render it wrapped around over 1/2 the tube circumference. It is a pretty big difference. I still think it looks awesome, just different. But I try really hard to get as close as I can to how they'll actually look.. ones in the future will be exceptionally close now that I know how his equipment works and the limitations he faces with it.

the spider was the one that i came really close to getting, now that face has taken care of issues w/ qc from the original batch i dont see any reasy for me not to get an iHy, (also shai has convinced me and i respect his opinions) couyld i see the render of the dragon? btw I like your original idea better, to have the spider on more of the tube, thats one of the reasons i loiked it so much, w/ the webbing all over the tube. looks amazing IMO. keep up the awesome work fisty

 

[Fisty]

I'm rendering the signature banners now, I'll post in a few minutes.

 

[rosesense]

Ripple, that one is acrylic, not tru stone, just so you know. If you mean the Blueberry one??? I have the same one and it is named.....Blue

You do nice stuff, Fisty.....

Nice tips, blue, that one on the middle iHy is just what I'm lloking for!!!

 

[DukeBlue]

You do nice stuff, Fisty.....

Nice tips, blue, that one on the middle iHy is just what I'm lloking for!!!

Thanks, that’s the blueberry swirl it’s one of my favorites. Daniele tried to guilt trip me into letting her have it LOL, it almost worked.

 

[RippleInStillWater]

Ripple, that one is acrylic, not tru stone, just so you know. If you mean the Blueberry one??? I have the same one and it is named.....Blue

Its sort of hard to tell from a picture.....