No Flavor
- Thread starter Zanaspus
- Start date
- th_trl_thread_readers 0
- Status
Not technically my first. I've played around with a cheapo, but it's my first serious RDA
28 guage, 1.5 ohms
No pic available, I espouse the stone age. The coil itself is a purchased pre-wrapped though I have wrapped my own before.
Vape output is great, there's just no wow factor in the flavor.
One thing that occurs to me. I only have 18-24 e-juice. Would lower nic deliver better flavor?
you purchased 28 gauge 1.5 ohm prewrapped coils? are they nr-r-nr welded ?
and how's your airflow
and how's your airflow
3.8V currently. On a provari, so limited to 20W. I realize most drippers go crazy on the wattage output. I'm just looking for flavor, not clouds to impress the neighbor kids.
every coil has it's sweet spot where the right voltage will bring it to the right temperature.
Well start bumping up that voltage; 28 gauge takes more power to hot it up than the 30 gauge you find in the common nonrebuildables
Provari is 15 watts max unless you were able to get the new p3. I'm thinking you issue is either to much wicking material in the coil or coil position. Besides placing the coil in line with airhole, you also have to play around with the distance from coil to airhole also the height of coil in relation to airhole. If using a provari and a 1.5 ohm coil then increase voltage to 4.7v, this will give you about the maximum wattage of the provari
Last edited:
4.7? on a 1.5 ohm coil, should start producing well at 3.8v
BUILD your own coil.
Micro Coil it
28Ga. about 2mmi.d.
Shoot for 1.4-1.6ohm
Smallest hole is about useless. Protank pulls more air.
Second Hole gives best flavor if built well.
Largest hole will sacrifice some flavor for Vapor.
Magma is not bad on 1coil, but will shine on Duals 1.2ohm and lower.
Currently running Duals at .8ohm
BUILD your own coil.
Micro Coil it
28Ga. about 2mmi.d.
Shoot for 1.4-1.6ohm
Smallest hole is about useless. Protank pulls more air.
Second Hole gives best flavor if built well.
Largest hole will sacrifice some flavor for Vapor.
Magma is not bad on 1coil, but will shine on Duals 1.2ohm and lower.
Currently running Duals at .8ohm
Are you sure you just don't have vapers Tounge I get this crap at least 1 week per month and it's annoying as shhiiiiittt
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
I'm using a 28 gauge single coil at 1.5 ohms, and I love it at 15watts. Middle airhole with medium-wide drip tip. I had to experiment with the afc and drip tips.
My rule of thumb. If you aren't sure what your doing start slow and work up. Beats burnt toast.
My rule of thumb. If you aren't sure what your doing start slow and work up. Beats burnt toast.
i suppose, but he did say it was a magma, so it should have some decent airflow. usually these new drippers are meant for much higher power so maybe 9 is just to cool, don't know, but i agree with starting slow if unsure,(good advise) especially when i hear things like "just bought an rda and want some big clouds, i have just bought some 16g wire and want to do a quad twisted parallel tiger, may question is how do i build it?"
- Status
Similar threads
