Nothing sits flush on k100

[SB2612]

I recently purchased a k100 and almost nothing sits flush on it. Not over hang, but flush as in nothing screws all the way down. My protank 2 doesn't screw down, my friends igo w3 doesn't, and my friends aspire Vivi nova doesn't either. I can't figure out why. Any suggestions?

I wasnt sure where to post this, so I'm sorry if it's on the wrong board.

 

[crxess]

K100 is Standard 510/Ego threaded so NO Floating center Pin.
Nothing you can do to change that.

To mount 510 threaded tanks solid(not flush) Purchase an Ego threaded tank support like this:

Chrome EGO Cone for 3.5ml DCT Tank : L Js E-Smokes, Electronic Cigarettes

Install and raise to stabilize tank just as it makes contact with center pin.

 

[SB2612]

Awesome, thanks! Any tips for a dropper though? Or is it the same thing?

 

[crxess]

Dropper?

Do you mean Dripper?
IGO-L Rebuildable Dripping Atomizer

Same deal, use the support sleeve to keep everything sitting tight.

 

[Ryedan]

K100 is Standard 510/Ego threaded so NO Floating center Pin.
Nothing you can do to change that.

That's interesting crxess. My Kamry K100 has a floating center pin. I think there is more than one manufacturer of these. Which company made yours?

 

[Ryedan]

I recently purchased a k100 and almost nothing sits flush on it. Not over hang, but flush as in nothing screws all the way down. My protank 2 doesn't screw down, my friends igo w3 doesn't, and my friends aspire Vivi nova doesn't either. I can't figure out why. Any suggestions?

I wasnt sure where to post this, so I'm sorry if it's on the wrong board.

This board works for this. As I said to crxess, my Kamry K100 has a floating center pin. What I do is back off the battery a bit and screw on the topper with firm force when it gets snug until it goes flush. Then screw the battery snug and back off a quarter turn. I've read of people who have had these mods fire continuously if the battery is left too tight. I use a Trident, a AGA-T and a Kayfun on it and all sit flush.

Now, it might be that your pin is quite tight, or it is not a Kamry, or they changed the design now. Mine is about a year old. So don't put too much force on it and break it. If a bit more force than you are applying now does not move the pin I would contact the supplier and ask them.

 

[SB2612]

I believe it's a Kamry. It says KeCig k100+, and it came with a Kamry case and an authenticating QR code. I'll try the ego cone and screwing it on firmly. Thanks for everything! Any other tips will be greatly appreciated!

 

[crxess]

Fingers crossed.
Usually FT list anything that has a floating or adjustable pin. I checked several sites and nothing came up......But we all know how lacking China to English communications can be.

Kamry K100+ E Cigarette Usa Big Sale - Buy K100+ E Cigarette,Kamry K100+,Kamry K100+ Ecig Product on Alibaba.com

 

[Ryedan]

I believe it's a Kamry. It says KeCig k100+, and it came with a Kamry case and an authenticating QR code. I'll try the ego cone and screwing it on firmly. Thanks for everything! Any other tips will be greatly appreciated!

Yup, mine also says KeCig. Let us know how it goes.

 

[Ryedan]

Fingers crossed.
Usually FT list anything that has a floating or adjustable pin. I checked several sites and nothing came up......But we all know how lacking China to English communications can be.

I hear ya crxess. There was a long thread on the K100 a while back that I can't find now. I did find this though and it's current; Kamry K100 Review. Looks like nothing has changed since I got mine.

 

[^Top-Shelf^]

Also have the Kamry K100, as noted there are some other manufacturers who make these. Mine is an authentic Kamry and has a floating center pin. Just got my KFL+ a few days ago and it didn't sit flush, backed battery tube off and tightened kayfun down until flush then tightened battery back up. All is good