o-ring list

[anavidfan]

I remeber there was a thread that listed all the o-ring sizes for GG products. I would especially be interested in Odysseus specific o-ring needs.

 

[t man]

Here you go.

http://www.e-cigarette-forum.com/forum/gg/196089-gg-series-o-rings-guide.html

 

[anavidfan]

thank you so much t man.

 

[LongDraw]

Hey ana, in that thread I think someone had mentioned this site https://www.oringsusa.com/catalog/index.php?cPath=482_488

I ordered from them and it worked great, orings seem top notch and no rubbery smell, like I have noticed from cheaper ones. Only issue was shipping, it was 7 or 8 bucks.

 

[anavidfan]

I went there earilier (I think) and could not find the 3mm x 2mm ones. I will check again, thanks LongDraw

 

[anavidfan]

nope, didnt find them they didnt have 3 x 2mm o-rings

Now Im bad at math, I did find some at amazon, but they were listed as 2mm x 3mm, does it make a difference if the number is inverted? are they the same? Or what would 3mm x 2mm be in inches? I will do a google search for the conversion.

 

[LongDraw]

This should be the ones

oringsUSA

Edit: Link takes you to these (19262) 3 MM X 2 MM BN70

 

[anavidfan]

thank you, guess my eyes arent what Id like them to be. Im going to order those and the ones at the end of the rebuildable part too.

 

[LongDraw]

Yeah I was glad I ordered from them. I had first ordered a kit from amazon, when it came in saw they didn't have the sized I needed (really need to learn my lesson with not looking close enough), plus they smelled like rubber really bad.

The ones of the usa site was nice cause able to order exact size, and really important no smell.

 

[fright88]

nope, didnt find them they didnt have 3 x 2mm o-rings

Now Im bad at math, I did find some at amazon, but they were listed as 2mm x 3mm, does it make a difference if the number is inverted? are they the same? Or what would 3mm x 2mm be in inches? I will do a google search for the conversion.

I know you already found what you need but just for future refrence this would be a completely different o-ring. in o-ring measurements the first number is the hole size and the second is cross section width(or the diameter of the actual rubber.)
So a 3x2 would be a total of 7mm outside diameter. Would have a 3mm hole and the rubber part would be 2mm thick. The 2x3 would have a 2mm hole and the rubber part would be 3mm thick. Which would give you total diameter of 8mm