O-rings please help!!

[Mr.BeSoBeautiful]

I'm not really sure if I'm posting this in the right area but i need an answer about hardware. I purchased a few o-rings today they were size #60 the dimensions are 1/4x1/8x1/16 and size #61 9/32x5/32x1/16. Based on the dimensions I'm assuming the 1/16 is the thickness of the o-ring since it is the common dimension in both. My question is as follows: does anyone know where i can find o-rings that aren't so thick maybe 1/32, or somewhere in between? I'm moding a CE2 clearomizer (I know this section is more or less for mods them selves but with the knowledge you all have I figured it'd be a good place to ask) due to leaking issues from the battery end because the o-rings they use are useless and wouldn't stop molasses from leaking out. I thank you all in advance for the feedback you may provide.

 

[jonboyusmc]

Try here. McMaster-Carr they should have what you're looking for, if not they do have 1/32" cord stock that you can cut to length.

 

[Mr.BeSoBeautiful]

Thanks a bunch! cord looks like the way to go or see if my hardware store has silicone o-rings or something a little softer than the ones I have.

 

[PKZap27]

I have not looked at metric sizes of O-Rings yet. However, since I've only found thicker O-Rings (1/16") in the standard sizes you might want to look at the metric sizes to see if you can find thinner O-Rings that big for your application.

I'm looking for O-Rings for Drip Tips and the ones that are 1/16" thick are too thick!

 

[Gummy Bear]

I use a standard 1/16" O ring for my custom drip tips and I had no problem fitting it onto everyone's attys at Vapestock.

OD = 11/32