Official - Quick Nic Juice - Thread

Status
Not open for further replies.

Joejokin

Unregistered Supplier
ECF Veteran
Nov 18, 2009
1,373
1,379
US, Midwest
www.quicknicjuice.com
Whoopie I finally joined up so I could say, "I love me some Quick Nic juice!" Yall's RY4 was the point at which I knew without a doubt vaping was for me. Just how can you bottle all the scents and flavors of colonial tidewater Virginia in one itty bitty little bottle? I'm vaping on some of the last of my bottle right now. I hope I can get another bottle of this here miracle juice next week, as I've overextended myself somewhat of late. Quick Nic Ry4 is tidewater Virginia in a bottle. Then again I think I'll have to mosey over to Facey's Book and like you in the hopes I can win a 150ml of the most addictive juice I've tried so far.

Thats awesome wingapo, glad you stopped by and joined the site. This place is stuffed full of great information, and you will never find a better group of people.
 

Wingapo

Vaping Master
ECF Veteran
Verified Member
Aug 19, 2011
3,647
4,796
Taos, NM
I'm on information overload, but I sure am getting the chance to try some wonderful mods and juices recommended by a bunch of rather lovable enablers like yourself. Your Ry4 in a Torpedo Tank from JonahNM, who lives down the road a piece from me, on a Buzz Pro will be a dream come true come monday, I can't wait. I just hope I can save my last few ml's of your RY4 till then.
 

Joejokin

Unregistered Supplier
ECF Veteran
Nov 18, 2009
1,373
1,379
US, Midwest
www.quicknicjuice.com
Yep there is a lifetime of information here, you would think the e-cig has been around forever. Im quite sure your gonna fit right in around here. Heck I joined this site in 2009, and you today, and you already have about a third of the post as I do, and there is two of us using this account.
 

Wingapo

Vaping Master
ECF Veteran
Verified Member
Aug 19, 2011
3,647
4,796
Taos, NM
Most of my posts today have been thank you's to all the great people who have welcomed me to the ECF. I've been reading this site like a post grad on a mission trying to learn about this incredible new healthier world of vaping for a couple months and if it wasn't for your juice and a couple mods I may never have thought to join up. I do fear that I may get a sucked into this ECF world as I have over on Facebook. Be prepared to be barraged with tons of my backyard snap shots over there, I hope you won't mind to terribly. I am truly glad to have met the fellow who was the main inspiration for me to go full on into the world of vaping.
 

fiery1

Senior Member
ECF Veteran
Apr 13, 2011
203
214
Texas
Not gonna laugh....... lol, I about peed in my paints when I read that.

rofl.jpgrofl.jpgrofl.jpg

I mean...Aawwww,:( poor baby!!! I'll send ya some Depends! :laugh:
 

Joejokin

Unregistered Supplier
ECF Veteran
Nov 18, 2009
1,373
1,379
US, Midwest
www.quicknicjuice.com
Most of my posts today have been thank you's to all the great people who have welcomed me to the ECF. I've been reading this site like a post grad on a mission trying to learn about this incredible new healthier world of vaping for a couple months and if it wasn't for your juice and a couple mods I may never have thought to join up. I do fear that I may get a sucked into this ECF world as I have over on Facebook. Be prepared to be barraged with tons of my backyard snap shots over there, I hope you won't mind to terribly. I am truly glad to have met the fellow who was the main inspiration for me to go full on into the world of vaping.

There really are some great people around here, never have I been part of such a wonderful group. What makes it so special is there are soo many people here from all different walks of life who are all ecstatic about one thing, being free frome those nasty cigarettes. How can you not be happy about that. And dont worry post your pics any where, here or there we wont mind at all.
 

Wingapo

Vaping Master
ECF Veteran
Verified Member
Aug 19, 2011
3,647
4,796
Taos, NM
After a while all my shots are nothing but dirt and rocks, then again that's all we have around these parts. I do have a feeling that soon many of my shots will have a PV lurking in them somewhere staring off at sunsets and wide vistas. So far the best thing about the ECF is that everyone is so helpful and ready with suggestions and information, but, so far the worst thing about the ECF is that everyone is so helpful and ready with suggestions and information, and as a result I am now as close to flat busted as I've been in years.
 

Joejokin

Unregistered Supplier
ECF Veteran
Nov 18, 2009
1,373
1,379
US, Midwest
www.quicknicjuice.com
After a while all my shots are nothing but dirt and rocks, then again that's all we have around these parts. I do have a feeling that soon many of my shots will have a PV lurking in them somewhere staring off at sunsets and wide vistas. So far the best thing about the ECF is that everyone is so helpful and ready with suggestions and information, but, so far the worst thing about the ECF is that everyone is so helpful and ready with suggestions and information, and as a result I am now as close to flat busted as I've been in years.

Yeah most think when starting off with vaping its going to be a big money saver. But then once you really get into it with new mods and batteries & whatnot all at a min of $100 a pop, it adds up fast. After a while though you will find a setup that just really works for you, & the buying will slow down. Although I have had my eye on one of those zebra wood grip mods for some time now.:laugh:
 

Wingapo

Vaping Master
ECF Veteran
Verified Member
Aug 19, 2011
3,647
4,796
Taos, NM
Treat yourself! Get that zebra wood grip mod. I've got my eye on two rebuildable attys and two more mechanical mods then I'm hoping all I'll have to worry about for a while is if your RY4 is in stock and a few DIY supplies. Yup, you inspired me to try mixing up a few of my own concoctions. I've found so far that I have no understanding of tobacco flavors whatsoever but I seem to be able to mix up some tasty fruity things like Raspberry Tahitian Limeade Champagne. You know flavors that make you think you're on a tropical island beach with a large umbrella drink.

I have encountered one possible stumbling block to my slowing down the acquisitions, JonahNM of Torpedo Tank fame lives down the road a piece from me and has clued me into a few of his latest projects like a rebuildable atty and a new SS mechanical PV built for our conditions here in the great outdoors of New Mexico. We need rock solid gear out this way as when we drop things they tend to fall or bounce hundreds of feet.

Then of course, being a wood carver, I may have to try my hand a building or carving a mod or two once I fully understand the workings and choices of bits and pieces. I've already got a few hundred PV stands laying around every surface in the house so I guess I may need the PV's to match soon.
 

Joejokin

Unregistered Supplier
ECF Veteran
Nov 18, 2009
1,373
1,379
US, Midwest
www.quicknicjuice.com
:thumb:
Treat yourself! Get that zebra wood grip mod. I've got my eye on two rebuildable attys and two more mechanical mods then I'm hoping all I'll have to worry about for a while is if your RY4 is in stock and a few DIY supplies. Yup, you inspired me to try mixing up a few of my own concoctions. I've found so far that I have no understanding of tobacco flavors whatsoever but I seem to be able to mix up some tasty fruity things like Raspberry Tahitian Limeade Champagne. You know flavors that make you think you're on a tropical island beach with a large umbrella drink.

I have encountered one possible stumbling block to my slowing down the acquisitions, JonahNM of Torpedo Tank fame lives down the road a piece from me and has clued me into a few of his latest projects like a rebuildable atty and a new SS mechanical PV built for our conditions here in the great outdoors of New Mexico. We need rock solid gear out this way as when we drop things they tend to fall or bounce hundreds of feet.

Then of course, being a wood carver, I may have to try my hand a building or carving a mod or two once I fully understand the workings and choices of bits and pieces. I've already got a few hundred PV stands laying around every surface in the house so I guess I may need the PV's to match soon.

I just might have to treat myself;) Its my birthday comming up in a couple of months. I would definitely like to see some pics if you ever do make a mod.
 

Wingapo

Vaping Master
ECF Veteran
Verified Member
Aug 19, 2011
3,647
4,796
Taos, NM
It'll probably be a while before I try my hand at a mod as I'm just beginning to learn about all this stuff and I have to test out a lot of what's out there to find out if these initial ideas of mine are possible, but when I do I'll try to remember to snap some shots for you to look at. I do know as a carver I'd like to get away from the box or tube mod, except as possible initial carving surfaces, and as I've made a few pipes and accoutrements for tobaccy smokers over the years I've a few ideas for more organic flowing natural shapes. Now you've got me thinking about getting into modding a bit sooner than I had thought.
 

Joejokin

Unregistered Supplier
ECF Veteran
Nov 18, 2009
1,373
1,379
US, Midwest
www.quicknicjuice.com
Ok, so I will start another thread for this but thought I would get it started here. Our contest will run for a week long and the winner will get 150ml of your choice. Pick it any way you want, 25- 6ml bottles, or 10- 15ml bottles or 5- 30ml bottles, or even 1- 30ml, 2- 15ml, and 15- 6ml bottles any way you want it split up is up to you.

Rules- to enter simply got to our facebook page( here Quick nic Juice on facebook) and like us. By doing so you are automatically entered. Then using random.org we will randomly pick a winner.

Good luck to everyone:thumbs:!!!!!!!!!!!!!!!!!!!!!!


Well 4 days left to get in the contest if you haven't yet!
 
Status
Not open for further replies.

Users who are viewing this thread