Ordered a Squape R(eloaded)!

Status
Not open for further replies.
*Rambling - background information*
I wish there weren't all these different rules to this forum. I am not new to vaping at all, but not really a pro either. I guess there is a reason for everything, though. I have been vaping for almost a year, and have tried vaping a few different ways. This forum and many of the members who I wish I could thank, have helped me so much on my path through E-cigs. I started with a V2 cig, and then went to a vv passthrough with a portable usb battery. I used cartos and clearos (vivi nova, T3, T3 mini). I then purchased a Provari and a Big Bully, using cotton and 28 ga microcoils. Later on, I purchased a Russian 91%, and eventually a Sigelei Zmax for vw. Not much of a Mech Mod man, but never had the chance to try one out (sub-ohm for that matter, either). I am kind of curious, but don't want to spend much in order to find out I don't like it HAHA. I, also, like the safety features... don't want to blow up as e-cigs are my only experience in screwing around with electricity. HAHA
*end rambling*
On 7/5/2014, I waited until 1:00 pm central time at Vape Revolution, until the Squape R(eloaded) went on sale. I knew it would go fast so I had everything ready. I was lucky enough to get one, as I noticed it was sold out by 1:15 :D. I think this is going to be an amazing piece and I am very excited. I've never been one of the first to have a new device, as I like to see what people have to say about them first. The Squape has been around and tested, and the Squape R(eloaded) is just an improvement to it. So, to be one of the first people to have it, I thought it was a good choice for my first time. I'm just waiting for it to be shipped and I'm so excited. I can't wait! I will post pics if this site let's me (new member), and post about my experience, likes, and dislikes after I've used it a week, or so. That is if anyone is interested! :confused:
 

jaxgator

Vaping Master
ECF Veteran
Verified Member
May 24, 2014
3,016
5,447
Jacksonville, FL

Shel

Ultra Member
ECF Veteran
Verified Member
Dec 23, 2009
1,122
833
Los Angeles
Here's a photo of my Squape R, #56.

I went down to VapeRev's shop yesterday and picked one up!

2014-07-06 07.32.22r.jpg

You're in for a treat!

The Squape R is very well constructed, threads are smooth as can be, base, when installed is tight with no wiggling, drip tip is tight, basically everything fits with to be expected Swiss perfection! Squape sits on my Vapor Shark with no gaps, no wiggling... again, as to be expected!

But what really matters is how it vapes... and it vapes GREAT!

To me, it really vapes more like a dripping atty then a tank atty. What I mean is, when I use a dripping atty, with a sub ohm coil, you get the atty snapping and popping when it's got a lot of juice on the wick... and it provides amazing flavor! That's how the Squape R is, but it snaps and pops on every vape, unlike with a dripping atty where, after 3, 4, 5 drags, you need to pull out your bottle, and wet your wick again.

One of the complaints on the original Squape was a tight draw... not enough air flow.

On version 2, I've got mine set to the third smallest air hole (1.4mm), and get tons of flavor and excellent vapor production! Keep in mind, if I want to take a lung hit, I can still open this up to 1.8mm, 2.2mm or even 3.1! Don't expect any complaints about tight draws on this puppy!

Changing air flow settings is a snap! The ball bearing keeps the air flow ring firmly in place, but when you want to either tighten up, or open up the air flow, a quick turn of the Air Flow Ring makes the change.... no need to find any tools, or even remove the tank from your device!

Need or want to rewick, or change out your coil? No need to empty your tank first... simply open it up, upside down, set the top section aside, with your remaining juice still in it, and work on your coil deck! No muss... no fuss..... and rebuilding your coil is made easier with a non-conductive surface on the base! Don't have to worry 'bout shorts.

This tank IS on the expensive side... however, if you do vape alot, and want a hassle free tank, that provides exquisite vapor flavor and production, and can afford it, you should give this tank a try! :vapor:

I honestly don't think people are going to be sorry!
 

Attachments

  • 2014-07-06 07.32.22.jpg
    2014-07-06 07.32.22.jpg
    20.2 KB · Views: 65
I also did not know that replies counted as posts, just thought starting threads was a post... I'm an idiot HAHA. Thanks for the info Shel, I did not know that they had a brick and mortar store! You're getting me even more excited to get it! Sounds great, and congratulations on getting one yourself! Yes, I vape all day long Haha. I ordered pg, vg, and nic in bulk and a good amount of flavors from Vapingzone's super concentrate section... Can't wait to try them in the Squape R(eloaded)! I love the crackling and popping, so that sounds great to me :p Also, yes it is definitely expensive, but I feel like I can afford any of these after not having to pay for cigarettes anymore!
 
Last edited:

Lword920

Unregistered Supplier
  • Deleted by classwife
  • Reason: Unregistered Supplier

Shel

Ultra Member
ECF Veteran
Verified Member
Dec 23, 2009
1,122
833
Los Angeles
Can you post a quick video of you vaping it? Looks great though.

Here you go... I'm not a cloud chaser, and the juice I'm vapping is 5 Pawns, which is, I believe, 50/50.... If I had used one of my juices that is 80/20 VG/PG, you'd see much larger clouds.....

Great tank, though. Again, it delivers amazing flavor and excellent vapor production. It also seems to deliver a warmer vape then my Kayfuns... not sure if it's because of the ematal coating, but it certainly is on the warmer side....



(Sorry it took me a while... had to use my Android phone for the video, and then figure out how to post it in a thread....)
 
Last edited:

Shel

Ultra Member
ECF Veteran
Verified Member
Dec 23, 2009
1,122
833
Los Angeles
I just "ordered" the original Squape from the buy/sell/trade forums. I'm a bargain hunter so I won't be looking at a Squape Reloaded until one of you guys decide to move onto something new :) But if I wasn't a bargain hunter I would have been one of the first to order this thing. It looks great.

Just a heads up...

I heard that the new base, from the Squape R works with the older model Squape that you purchased!

This means that you can purchase a S base for the Squape R (VapeRev had 'em in stock a few days ago), and it'll give you the new base from the Squape R, the new air flow control.... you just won't have the new triangular tank openings, and you won't have glass...

I'd give VapeRev a call, and ask them if they can confirm that the S Base for the Squape R will work with an older Squape, and if so, for (I believe it's $20), I'd pick up a replacement base!

Yup... they have 'em in stock... here!

You'd then have a fantastic Squape, for a ridiculous price!
 

greyknight

Full Member
Verified Member
Feb 10, 2014
31
15
Las Vegas, Nevada
Well, I've had mine since Saturday 7/12. It has been amazing except for 1 issue, it leaks like crazy from the drip tip when filling it! Literally half the juice just dribbles out. I've tightened the chimney, dried it out, etc, no improvement. I'm gonna try and find a small boring for the shelf below the threads and if that doesn't work, screw it. A real shame, this thing has been awesome for the first 3 days, now it's useless.
 

jaxgator

Vaping Master
ECF Veteran
Verified Member
May 24, 2014
3,016
5,447
Jacksonville, FL
Well, I've had mine since Saturday 7/12. It has been amazing except for 1 issue, it leaks like crazy from the drip tip when filling it! Literally half the juice just dribbles out. I've tightened the chimney, dried it out, etc, no improvement. I'm gonna try and find a small boring for the shelf below the threads and if that doesn't work, screw it. A real shame, this thing has been awesome for the first 3 days, now it's useless.

That's very strange.

I've had mine for quite some time now and never had any issue with leaking through the drip tip when filling.

I would have suggested that your chimney wasn't on tight but you've already mentioned that you have it tight. You didn't happen to strip the threads on the chimney did you?
 
Status
Not open for further replies.

Users who are viewing this thread