Origin Vape Giveaway Thread Part 9 - The funnest thread on ECF =)
- Thread starter vaporator2000
- Start date
- th_trl_thread_readers 0
-
- Tags
- contest contest giveaway
- Status
10/3
2. Stupid vaping moments...
Took my dog to the vet to be spayed and when I went to get her out of the back seat, she decided to jump out of the car...in my haste to catch her I ended up dropping all my mods on the concrete...luckily for me ended up with scratches on only one of them and the glass tanks didn't break...did however break another couple of my tips, but luckily those were able to be repaired.
2. Stupid vaping moments...
Took my dog to the vet to be spayed and when I went to get her out of the back seat, she decided to jump out of the car...in my haste to catch her I ended up dropping all my mods on the concrete...luckily for me ended up with scratches on only one of them and the glass tanks didn't break...did however break another couple of my tips, but luckily those were able to be repaired.
10/03 #2
When I started vaping, I had fallen asleep at my desk at home with my EVOD setup in my hand. I woke up later and didn't realize I had dropped it and rolled my desk chair over the unit. It looked OK, but later found it leaking around the glued seals on the cheap tank.
When I started vaping, I had fallen asleep at my desk at home with my EVOD setup in my hand. I woke up later and didn't realize I had dropped it and rolled my desk chair over the unit. It looked OK, but later found it leaking around the glued seals on the cheap tank.
10/4
#1
didn’t give a new pre-built coil enough time for the wick to get saturated – instant ruined coil
#1
didn’t give a new pre-built coil enough time for the wick to get saturated – instant ruined coil
10/4
#2
didn’t hold newly wrapped coil over the can when clipping the leg – spent half an hour sweeping the area with a magnet so I wouldn’t find it the painful way later
#2
didn’t hold newly wrapped coil over the can when clipping the leg – spent half an hour sweeping the area with a magnet so I wouldn’t find it the painful way later
10-04 #1
DUH Moment
Replacing the glass section on a RTA with the stainless steel section.
Looked great, however.
Dry hit city because I couldn't see the juice level.
DUH Moment
Replacing the glass section on a RTA with the stainless steel section.
Looked great, however.
Dry hit city because I couldn't see the juice level.
10/04 Entry #1 . . .
Theme: A "Stupid"/"Duh" Moment since I started vaping . . .
Being impatient to filling a tank with a new flavor of "E-Liquid" - only to realize it wasn't the new "E-Liquid", but one already in use . . .
Theme: A "Stupid"/"Duh" Moment since I started vaping . . .
Being impatient to filling a tank with a new flavor of "E-Liquid" - only to realize it wasn't the new "E-Liquid", but one already in use . . .
10/4 #1
Something stupid you've done since you started vaping....I know we all have had those "duh" moments
Forgot to replace head on an Evod I was refilling before reattaching the base. Fortunately I was refilling several at the time, so I only flooded my counter--not a mod.
Something stupid you've done since you started vaping....I know we all have had those "duh" moments
Forgot to replace head on an Evod I was refilling before reattaching the base. Fortunately I was refilling several at the time, so I only flooded my counter--not a mod.
10/4 #1
From one of my blog entries, a very long time ago....
The morning started normal enough, have coffee, couple of croissants, fill a few cartos, catch the news and traffic report, check the supplies in my travel case (hard sided sun-glass case), everything going smooth.
Get to work, and setting up my desk for the day, coffee - check, headphones and tunes - check, computer prescription bi-focals - check, PV travel case - &%&*$#@@$^*&& - NO CHECK. It's still sitting on the table at home. No 306 atty and drip tip, no ego mega atty and drip tip, no 510 atty and drip tip, no extra ego battery, no extra 14500 battery, no tweezers, no pre-filled cartos, AAAAAHHHHGGGGGG.
OK don't panic, I have a 650mah ego and a 14500 900mah mod to see me thru, but just the two cartos on them, and my 8ea - 3ml sample bottles of juice. Going rustic here, prying out the seals with a pen and refilling cartos, CE2 of course, and no syringe, this is like the dark ages.
Made it thru the entire day and the commute home and not even ONE ANALOG.
Piece of cake
From one of my blog entries, a very long time ago....
The morning started normal enough, have coffee, couple of croissants, fill a few cartos, catch the news and traffic report, check the supplies in my travel case (hard sided sun-glass case), everything going smooth.
Get to work, and setting up my desk for the day, coffee - check, headphones and tunes - check, computer prescription bi-focals - check, PV travel case - &%&*$#@@$^*&& - NO CHECK. It's still sitting on the table at home. No 306 atty and drip tip, no ego mega atty and drip tip, no 510 atty and drip tip, no extra ego battery, no extra 14500 battery, no tweezers, no pre-filled cartos, AAAAAHHHHGGGGGG.
OK don't panic, I have a 650mah ego and a 14500 900mah mod to see me thru, but just the two cartos on them, and my 8ea - 3ml sample bottles of juice. Going rustic here, prying out the seals with a pen and refilling cartos, CE2 of course, and no syringe, this is like the dark ages.
Made it thru the entire day and the commute home and not even ONE ANALOG.
Piece of cake
10/4
1.
A duh moment that has happened several times.. not screwing the top back on the eliquid properly and then grabbing said eliquid by the dropper top to pick up and making a mess.
1.
A duh moment that has happened several times.. not screwing the top back on the eliquid properly and then grabbing said eliquid by the dropper top to pick up and making a mess.
10/4 #1 Leaving my mod in my purse on a hot day. So much for the silk/satin lining...now juice stained. Sadly, I didn't learn the first time but have done this several times, at least it's always the same pocket.
10/4
2.
Another duh moment that happens a lot is me forgetting to charge batteries. I have a very bad habit of that. If the mod uses external batteries I always forget to charge them, until I want to use the mod. My mods that have internal batteries get a lot more use because I can just the usb cable that says plugged into my computer and charge.
2.
Another duh moment that happens a lot is me forgetting to charge batteries. I have a very bad habit of that. If the mod uses external batteries I always forget to charge them, until I want to use the mod. My mods that have internal batteries get a lot more use because I can just the usb cable that says plugged into my computer and charge.
10/4 #1
Stupid things......
not changing batteries before going out....but that's not the end of the world for me...as I can/have used regular "AAA" batteries from anywhere to power my puck mod.........
Stupid things......
not changing batteries before going out....but that's not the end of the world for me...as I can/have used regular "AAA" batteries from anywhere to power my puck mod.........
10/4 #2
Stupid things........
I have also purchased stuff thinking I needed it and then found out I had some in my bin and didn't need it right away.....that's how I ended up with 3 packs of coils for mu Unitank....so I am set for a few months...............
Stupid things........
I have also purchased stuff thinking I needed it and then found out I had some in my bin and didn't need it right away.....that's how I ended up with 3 packs of coils for mu Unitank....so I am set for a few months...............
10/4 #2
Forgetting my charger, with a battery on it, at work, ugh. I don't work everyday and sometimes go 5 or 6 days without going into the same job, plus I live 30-35 minutes (one way) away from town and drive a gas guzzling Tahoe. This one only happened once, that was enough of a lesson not to bring it with me and just make sure I have fresh batteries if I know I have to work!
Sent from my SAMSUNG-SM-G900AZ using Tapatalk
Forgetting my charger, with a battery on it, at work, ugh. I don't work everyday and sometimes go 5 or 6 days without going into the same job, plus I live 30-35 minutes (one way) away from town and drive a gas guzzling Tahoe. This one only happened once, that was enough of a lesson not to bring it with me and just make sure I have fresh batteries if I know I have to work!
Sent from my SAMSUNG-SM-G900AZ using Tapatalk
10/4
1. Stupid vaping moments...
Having a coil that has clearly gone bad, and instead of changing it, setting the mod to the side saying I'll do it later, and then instead of picking up one of my many other mods, going straight for the one with the bad coil...and not just once, but over and over!
1. Stupid vaping moments...
Having a coil that has clearly gone bad, and instead of changing it, setting the mod to the side saying I'll do it later, and then instead of picking up one of my many other mods, going straight for the one with the bad coil...and not just once, but over and over!
10/04 #1
Something I did a few days ago, I didn't tighten the little side screw on my subtank mini rba deck. It vaped fine, but when I went to refill the tank, the whole rba cover stayed in the tank as I pulled the deck off.
Something I did a few days ago, I didn't tighten the little side screw on my subtank mini rba deck. It vaped fine, but when I went to refill the tank, the whole rba cover stayed in the tank as I pulled the deck off.
10/4 #2
Something stupid you've done since you started vaping....I know we all have had those "duh" moments
On my subtanks: I often forget to put the top cap back on the RBA section after filling the tank and priming the wick.
Something stupid you've done since you started vaping....I know we all have had those "duh" moments
On my subtanks: I often forget to put the top cap back on the RBA section after filling the tank and priming the wick.
- Status
Similar threads
- Locked
- Locked
- Locked
- Locked