Orings, Odysseus & Penelope 3.5 ohms 7.4 volts

[Bishopheals]

Single coil 3.5 & 3.0ohms @ 7.4 Volts
2 ½ inches (6.35 Centimeter) of 32 gauge resistance wire Kanthal wire will ohm out at 3.5 ohms.
2 ¼ inches (5.715 Centimeter)of 32 gauge resistance wire Kanthal wire will ohm out at 3.0 ohms.


If you don't know how to make a single coil please look at my how to video making a single coil for Odysseus and Penelope.

I will make another video on replacing O Rings. Ill most likely do one on UFS soon since I bought one used and the O Rings do need to be changed.

Batteries please use high drained batteries. I recommend strongly AW IMR 18650 3.7 volts. Anything other than that feel free to post in the GG section of the ECF forums and we can tell you if it's safe. I don't recommend cheating on quality on this especially if it may complicate your health if a generic battery explodes do to the load.

The Tiramisu juice was spot on. The aroma was powerful to resemble chocolate moose. The texture and taste was so powerful it brought me back drinking hot cocoas as a kid. The taste of this warm chocolate is sinful to even indulge in such pleasures. Highly recommend all who are deep chocolate lovers. This is a great juice.

Crème Brulee juice was very very good. It tastes as the real desert. SPOT ON, I didn't get to compliment it much since I was so drawn to Tiramisu. Crème Brulee by its self is a remarkable juice. The scent and taste of fresh custard made me hungry as hell. Good Job guys.

I had a crazy thought which I show in video if two can be fused together. The flavors are out of this world mixed. At the same time I vaped them both in video. The richness and taste of the juice is out of this world. My next juice I have to ask if you can fuse them both together. WOW that's good Stuff. Bryan you're going to have to make a me a special fused one to try.

Thanks Bryan.

COV: 18650 AW IMR battery 2000mAh, Three upper tubes GGTS to stack two 18650 batteries.
Welcome to Clouds Of Vapor

E-Juice Tiramisu & Crème Brulee
E Cig Juice @ *_Highbrow Vapor_* - E Liquid Store, Shop our Store for Ecig Products.

Any questions feel free to email me.

How to video making Single Coil
How to make single coil with 32 gauge . - YouTube

 

[Roxxette]

You??? Doing 3ohm coils ?! Nah man it cant be true

 

[Bishopheals]

LOL I like to show folks that they can enjoy at a higher voltage with a good range of ohms they can vape. I did say in video to vape hotter just reduce the ohms. LOL

 

[Torqueguy]

Bish, I always used 36ga for high resistance. Is there a reason why you used the 32? Do the coils last longer with the thicker wire?

I'm running Bounty Hunter 24 at 4.5 ohms with 7.4V today and it's outstanding.

Inquiring minds and all that...

thanks

 

[Roxxette]

Bish, I always used 36ga for high resistance. Is there a reason why you used the 32? Do the coils last longer with the thicker wire?

I'm running Bounty Hunter 24 at 4.5 ohms with 7.4V today and it's outstanding.

Inquiring minds and all that...

thanks

well a great advantage of using a thicker wire is you can have more coils/wraps and still get the same resistance, ive found more coils/wraps the flavor seems better and maybe the vapor.

 

[Bishopheals]

The reason why i did it with 32 gauge is because of the folks i showed how to make a dual coil and it was in 32 gauge for low resistance. They can use the same gauge to get 3.0 and 3.5 ohms. It was the same distance in resistance wire except cutting it ion half for dual coils. so this will be another alternative to enjoy a real good good good vape using same gauge. I got about 6-7 coils using a dual 3.5 wick. The hit is incredible. If I have the wick well saturated I can press and hold that power down for a good 8-10 seconds of good inhaling vape before it dries up(@3.5 ohms).

 

[springfieldarms]

Mmmmm now that's what I'm talking about. Nice 8-10 second draws

 

[unloaded]

I've been running the Ody at 7.4v and I can only take about a 1 second hit beforer my lungs are full. Never measured the resistance but it's single coil, dual wick 3mm. AVE's PG Chai is climbing the charts for me.

 

[Torqueguy]

The reason why i did it with 32 gauge is because of the folks i showed how to make a dual coil and it was in 32 gauge for low resistance. They can use the same gauge to get 3.0 and 3.5 ohms. It was the same distance in resistance wire except cutting it ion half for dual coils. so this will be another alternative to enjoy a real good good good vape using same gauge. I got about 6-7 coils using a dual 3.5 wick. The hit is incredible. If I have the wick well saturated I can press and hold that power down for a good 8-10 seconds of good inhaling vape before it dries up(@3.5 ohms).

Thanks Bish. I'll try it

 

[Natron]

Thanks bishop. I myself am doing what Roxxette is doing. (and personally has become my nirvana).

 

[Bishopheals]

Thanks bishop. I myself am doing what Roxxette is doing. (and personally has become my nirvana).

Anytime, As long as you enjoy it is all what matters.

 

[kickitback]

COV has O-rings in stock for the Odysseus, Iatty, GGTS. they had them for over a week.

 

[unloaded]

Measured my coil at work today, it's 4 ohm so I'm running at 13+ watts. Put the Kick in but it was disappointing with that coil 7.5 watts because of the 5.5v limit. If this coil ever wears out I'm gonna make one about 2.75 ohm and see what to kick does then. Right now the Kick is in my mini Grip.