Wish I could say the same. One fill lasts me about six hours... lol
Paging... Isaac. Availability date???
- Thread starter MAlzado
- Start date
- th_trl_thread_readers 0
- Status
Just waiting for someone to come out with a Fusion hole punch device (and a nice tank cover like the Ikon has)....
I did buy a CE2 tank a few days ago (and a LR ego tank tank system). We'll see how that goes. Not really sure I want to be seen outside the house with the CE2 tank though...
I vape with my map/fusion everywhere and I haven't even had anyone look. I was next to a detective driving with it and he didn't even care.
That's because your tank is smaller.
That's because your tank is smaller.
How do you cut the Fusions? What tank do you recommend (would prefer something no wider than an ego)? I do miss the juicy goodness of a freshly filled Fusion tank.
Last edited:
my doctor says i need an atty infusion... stat! it seems i have run dangerously low on these life-critical components. this is a medical emergency!!!
btw, he says i need pizza too. (in case you wanna take the pay it forward thing to a new level...)
when will these be available again?
306 hv?
510 hv?
306 & 510 lr too
510 hv ? in stock
Well Caged everyone is having good luck with the liquinator from vaporesence but it's larger than what your talking about. I use a Dremmel to cut the hole but you can use a drill and some are using a nail to poke a hole in the carto. You could build one to your own specs with these tubes and grommets.
3/4" OD x 5/8" ID x 1/16" Wall Polycarbonate Tubing | U.S. Plastic Corp.
Vinyl Grommet 5/16 Bore Diameter
Mine and Lofts is with the MAP tank.
Last edited:
Well Caged everyone is having good luck with the liquinator from vaporesence but it's larger than what your talking about. I use a Dremmel to cut the hole but you can use a drill and some are using a nail to poke a hole in the carto. You could build one to your own specs with these tubes and grommets.
3/4" OD x 5/8" ID x 1/16" Wall Polycarbonate Tubing | U.S. Plastic Corp.
Vinyl Grommet 5/16 Bore Diameter
Mine and Lofts is with the MAP tank.
I wonder if one of the storm tanks would work, though I'm not sure I'd keep up with the hole punching.
Isn't it about time Ikenvape came out with a tank system?
I wonder if one of the storm tanks would work, though I'm not sure I'd keep up with the hole punching.
Isn't it about time Ikenvape came out with a tank system?
Should, but I don't know about those caps. I use the DCT MAP tank as the delrin caps have orings inside like the liquinator but it is also a tighter fit than the liquinator. Absolutely no leaks, even if I lay it down on its side for hours.
Sent from my Desire HD using Tapatalk
T made one out of a storm tank and the wall is very thin. I wouldn't attempt to put a screw in it but it cracked anyway. It's just too thin. I replaced the tank on that on with a syringe I cut off. It works okay like that but I have to take the top off to fill it. Deb made one out of a MAP tank too.I wonder if one of the storm tanks would work, though I'm not sure I'd keep up with the hole punching.
Isn't it about time Ikenvape came out with a tank system?
I've been reading about people having problems with those because the tanks were wrong and they slipped apart easily.
Ya mines the same way I can lay it down all night and it doesn't leak a drop. Even up side down.
Last edited:
I have to use a small flathead screwdriver to separate mine lol... its not going to slip apart at all
Sent from my Desire HD using Tapatalk
The 510's are definitely coming without a doubt. They should be here in under a week yet. Those are coming in Chrome and Stealth in 1.5-1.8-3.5 and 4.5Ω The 306's sadly I cannot yet say. I'm still working on them to be at optimum. I always loved a good 306, but the quality and durability of them is so fragile. With the io6 we did just that and it came out like a dream. I want to do the same with the 306, but the size makes it difficult. Everything that needs to be enhanced is just too small. Just give me a little more time. I hate not having them too, but I don't want the market standard. Even with our own cores, it still is just a short lived device. You have your luck of the draw where wicks don't burn or cores getting scorched and the leakiness of the separating mesh. 306's are so bad to the point where devices( DCA, Reo, dripping wells generally) to it will hold this leakage and recycle it back into the unit. Thats another question I want to look into sometime...My doctor says I need an atty infusion... stat! It seems I have run dangerously low on these life-critical components. This is a medical emergency!!!
BTW, he says I need pizza too. (in case you wanna take the pay it forward thing to a new level...)
When will these be available again?
306 HV?
510 HV?
306 & 510 LR too
I wonder if one of the storm tanks would work, though I'm not sure I'd keep up with the hole punching.
Isn't it about time Ikenvape came out with a tank system?
Indeed, I wonder whats going on behind that curtain...
thanks for the reply isaac, i'm sure all of us really appreciate it. sucks that the 306's are the only one without a time estimate /cry. do you have maybe even a rough estimate? month or two? lookin fwd to a better working 306 that's for sure.
Indeed, I wonder whats going on behind that curtain...
If you mean besides the Ikon and ego-t, you have my interest (you already had my interest, but I know about the other tank systems). A Fusion tank would really have my interest.
Tanks???I was totally shocked with the performance of the Ikon and mentioned that in my review. Does that make me want to go out and by CE2s? Hell no, but I will buy more tanks for the Ikon if they become available
Don't make me stalk you...Indeed, I wonder whats going on behind that curtain...
Wouldn't it be great if you could hack in to the minds of certain people? Sometimes I just can't wait for the day when they start implanting computer chips in to people's minds for this very reason.
- Status
Similar threads
- Locked
