Perhaps I'm doing something wrong

Status
Not open for further replies.

Soulflower

Senior Member
ECF Veteran
Sep 7, 2010
177
30
Michigan
Greetings,
I decided that I didn't want to fool with tanks since I don't have experience with using them. I actually prefer the analog style drag so I ordered a high voltage 901 atomizer which arrived on today. It works well and gives plumes of vapor, but even at 6 volts my all important throat hit is not there. It feels (and sound) as if I am sucking air. I need to know if there is a high voltage mega atty, or at least a high voltage atty that will give a massive th? Any suggestions?
Thanks
SF
 

MonsterKenny

Ultra Member
ECF Veteran
Mar 23, 2009
1,499
1,782
dublin ohio
www.provape.com
Soulflower,
What device are you using the 901 on? With an HV atty and a high voltage device such as the provari, you should not be experiencing these problems. I guess the problem could lie on the atomizer adapter, bad atomizer or the device depending on how the connection is set up. With a provari and a 901 adapter, you should not be experiencing this issue.
 

Soulflower

Senior Member
ECF Veteran
Sep 7, 2010
177
30
Michigan
Soulflower,
What device are you using the 901 on? With an HV atty and a high voltage device such as the provari, you should not be experiencing these problems. I guess the problem could lie on the atomizer adapter, bad atomizer or the device depending on how the connection is set up. With a provari and a 901 adapter, you should not be experiencing this issue.

Hi Kenny,
I am using the Provari with a 510-901 adapter. The air is a loud hissing sound. I will try another atty since I ordered 3. Wish me luck lol.
 

Dalton63841

Moved On
Feb 14, 2011
3,456
3,214
41
Maine
Sunflower, one word = Ikenvape 3.5ohm 510 Atty ! this will perform for you ! I dont care what anyone says about ohms, throw this bad boy on your PV @ 6V,,,,,,

^^I usually buy Joye's from Vapor Kings, because you can get a 10 pack for $45, but when I have money to spare, I buy the Ikenvapes, and they are freakin KING. I haven't found a better atomizer yet.
 

Dalton63841

Moved On
Feb 14, 2011
3,456
3,214
41
Maine
I just went to the ikenvape site and there's a we'll be back on June 15th message. I couldn't even pass go. Are there any other vendors with the same set up?

Ikenvape isn't like Joye. They are only available from Ikenvape. They are in the midst of switching servers right now, but should be back up in the next few days.
 

Soulflower

Senior Member
ECF Veteran
Sep 7, 2010
177
30
Michigan
Ikenvape isn't like Joye. They are only available from Ikenvape. They are in the midst of switching servers right now, but should be back up in the next few days.

Thanks Dalton. I will wait until next week. My kick bass joose was shipped on today, so waiting gives me an excuse to let it steep :)
 

Skyway

Ultra Member
ECF Veteran
Verified Member
Apr 10, 2009
1,090
324
NC - USA
www.bsvoboda.com
I meant to add that the E1 message was there from 3.0 and up. The cart is sopping wet with juice. Well back to the Ego lol.

I wanted to ask since of how it is worded. You said you got HR 901's but in this message you said "The cart". You sure you are on an atty or a cartomizer? Just figured I would ask. With the Provari, you would not need to specifically get a HV atty since it is VV unless you just like that setup.

Edit- one other note. Some HV 901s are in the 4.8ohm range, you would not get much of a TH at all on the Provari since it only goes to 6v. Something this high would be better off on a 7.4v system.
 
Last edited:

Dalton63841

Moved On
Feb 14, 2011
3,456
3,214
41
Maine
Exactly what I was trying to point out earlier. Standard resistance 901's are 2.9ohm, and are MORE than sufficient for 6v.

I wanted to ask since of how it is worded. You said you got HR 901's but in this message you said "The cart". You sure you are on an atty or a cartomizer? Just figured I would ask. With the Provari, you would not need to specifically get a HV atty since it is VV unless you just like that setup.

Edit- one other note. Some HV 901s are in the 4.8ohm range, you would not get much of a TH at all on the Provari since it only goes to 6v. Something this high would be better off on a 7.4v system.
 

Soulflower

Senior Member
ECF Veteran
Sep 7, 2010
177
30
Michigan
I wanted to ask since of how it is worded. You said you got HR 901's but in this message you said "The cart". You sure you are on an atty or a cartomizer? Just figured I would ask. With the Provari, you would not need to specifically get a HV atty since it is VV unless you just like that setup.

Edit- one other note. Some HV 901s are in the 4.8ohm range, you would not get much of a TH at all on the Provari since it only goes to 6v. Something this high would be better off on a 7.4v system.

I meant cartridges with filler, sorry. I wasn't able to check the ohm due to the first atty blowing and the other 2 giving the E1 message from the start. I should've checked while the first atty was partially working lol. In the meantime I will just order the suggested Ikenvape 3.5 510 atomizer.
 
Status
Not open for further replies.

Users who are viewing this thread