Picture of Your Setup Part 2!
- Thread starter QuietProSF
- Start date
- th_trl_thread_readers 0
- Status
Nothing gets pass you pastubbs huh!!!
Well I made/modified DIY style. Putting something together details soon. Surprising results.
Well I made/modified DIY style. Putting something together details soon. Surprising results.
Oh, b'coz of the cops here I restrain myself to around 140kmph, else while in Dubai my speed is 220
But yes, I should slow down, you are right Sir!
What is the speed limit where to took that picture? 115kmph I'm guessing.
What's up, new to the site and have only been vaping since early august when I quit smoking.
My current setup is a LP Reo Grand. Kawasaki green in color, have a Reomizer 5 RBA running a dual coil at about .3 ohms total. The coil I'm using right now is the stove top coil, I saw it off rip trippers on YouTube and decided to try it. I'm using 24awg kanthal and rayon for the wick. Batteries are sony vtc5. juice I'm on is pretty much anything I want to try from thevaporhut.com. My favorite juice is vanapple wood and mossy oak.
Attachments
Last edited:
What atomizer is on top of your Reo? Here is mine only had it for a week but I love it.
Attachments
It doesn't come with a drip tip when you order it. I just went out and got the SS genie tip in the picture from a local vapor store
OK, I'm back. Drip Tips? In the image below the BB on the 2Six is 1/2 of a Kayfun Quartz Nano (22.04mm) Kit. The BB on the 7-22 is the glass from the Kraken (20.11mm) atty.
I'm sure most of you guys and gals have a lot of spare parts hanging around. With the help of a few O-Rings they all came together.
Mount your drip tip to your atty, add the O-Ring, add a little juice for lube and do the hockey poky til satisfied. Below is what the end product should look like. Your O-rings may vary so just see what works.
Here on a Kayfun/4Nine set up.
I must admit it's like vaping with dual air chambers and instead of wrapping my lips around it, it was a kiss and the best thing I noticed was less cleaning...you know the drip crud all dried up on the side of your drip tip. If you can put one together give it a shot. Won't hurt.
At the end I saw this come out on Fasttech and studied the picture they had and said "hey that look like....". So after a few hours. Just having fun and all you guys and gals can have fun too. Oh and be careful and be safe. I wouldn't suggest on using the stainless steel Kayfun rings as they have very sharp edges that could cut your lip if your sky diving or something like that.
OK Laters...jam
I'm sure most of you guys and gals have a lot of spare parts hanging around. With the help of a few O-Rings they all came together.
Mount your drip tip to your atty, add the O-Ring, add a little juice for lube and do the hockey poky til satisfied. Below is what the end product should look like. Your O-rings may vary so just see what works.
Here on a Kayfun/4Nine set up.
I must admit it's like vaping with dual air chambers and instead of wrapping my lips around it, it was a kiss and the best thing I noticed was less cleaning...you know the drip crud all dried up on the side of your drip tip. If you can put one together give it a shot. Won't hurt.
At the end I saw this come out on Fasttech and studied the picture they had and said "hey that look like....". So after a few hours. Just having fun and all you guys and gals can have fun too. Oh and be careful and be safe. I wouldn't suggest on using the stainless steel Kayfun rings as they have very sharp edges that could cut your lip if your sky diving or something like that.
OK Laters...jam
Hey man. new to vaping and rocking nautilus mini as my first ecig. Rocking it with the ipv2 shortly. Anyways, what tank style RDA do you recommend? Do they perform good for workdays?
Been keeping it pretty simple lately.
Just for fun, wow its tiny. Removed adjustable nut from atty and used a button top batt.....
Now that's some ingenuity.
OK, I'm back. Drip Tips? In the image below the BB on the 2Six is 1/2 of a Kayfun Quartz Nano (22.04mm) Kit. The BB on the 7-22 is the glass from the Kraken (20.11mm) atty.
I'm sure most of you guys and gals have a lot of spare parts hanging around. With the help of a few O-Rings they all came together.
Mount your drip tip to your atty, add the O-Ring, add a little juice for lube and do the hockey poky til satisfied. Below is what the end product should look like. Your O-rings may vary so just see what works.
Here on a Kayfun/4Nine set up.
I must admit it's like vaping with dual air chambers and instead of wrapping my lips around it, it was a kiss and the best thing I noticed was less cleaning...you know the drip crud all dried up on the side of your drip tip. If you can put one together give it a shot. Won't hurt.
At the end I saw this come out on Fasttech and studied the picture they had and said "hey that look like....". So after a few hours. Just having fun and all you guys and gals can have fun too. Oh and be careful and be safe. I wouldn't suggest on using the stainless steel Kayfun rings as they have very sharp edges that could cut your lip if your sky diving or something like that.
OK Laters...jam
- Status
Similar threads
