Brass can have petina much like copper. There is many videos on youtube that will show you how to do a forced petina.
Picture of Your Setup Part 2!
- Thread starter QuietProSF
- Start date
- th_trl_thread_readers 0
- Status
Brass can have petina much like copper. There is many videos on youtube that will show you how to do a forced petina.
Awesome. I will check it out. Never thought of doing that before looking around here.
Here's a couple new clones.
ZNA and Maraxus III clones by zipflint, on Flickr
I always liked the first Maraxus, and the 3rd one is just as good, provided you like the oddball style.
Maraxus clone detail 02 by zipflint, on Flickr
ZNA and Maraxus III clones by zipflint, on FlickrI always liked the first Maraxus, and the 3rd one is just as good, provided you like the oddball style.
Maraxus clone detail 02 by zipflint, on FlickrZipflint,
Nice lookin set up... What manufacture is your zna clone? Where'd you get it? How do you like it? Material and build quality? What chip they through in there?
I've been looking into zna clones ... But having trouble deciding if I want to pull the trigger
Nice lookin set up... What manufacture is your zna clone? Where'd you get it? How do you like it? Material and build quality? What chip they through in there?
I've been looking into zna clones ... But having trouble deciding if I want to pull the trigger
Mine is a Wotofo from Focal, one of the first ones they had up for sale. It's not perfect but it's darn good. The positive 510 pin is reverse threaded and mine was in there SUPER tight, and I buggered up the soft copper pretty badly. I finally got it out and sanded it clean, and everything is kosher.
I'm pretty sure it's the Yihi SX330 (? not sure, but it goes up to 30watts) chip and it's been solid so far. My only other experience is with whatever is in my CANA MODZ clone. I know they are different chips; on the CANA for example, you hold the UP and DOWN buttons at the same time to lock it, and it's 5 clicks of the power button on the ZNA clone. You do have to "wake up" the ZNA when it goes to sleep, but that's no big deal, just a quick tap, and then you're ready to fire. So I do like a double-click when it's been sitting for a few minutes.
Fit 'n finish on the Wotofo ZNA is pretty great. No blemishes or scratches. Tube is (I think) stainless steel and the body is (again, I think) aluminum, so it's more like a ZNA Lite. The battery life at 17 watts (on a .9 Ohm coil) isn't great but I knew a 18500 (I've been using the purple flat top Efest batteries) wouldn't last all day, so I'm not complaining.
I hope that helps! I think I got mine for about $60, but the prices have gone up since then. I wouldn't spend more than about $80 for one, but that's just me.
I'm pretty sure it's the Yihi SX330 (? not sure, but it goes up to 30watts) chip and it's been solid so far. My only other experience is with whatever is in my CANA MODZ clone. I know they are different chips; on the CANA for example, you hold the UP and DOWN buttons at the same time to lock it, and it's 5 clicks of the power button on the ZNA clone. You do have to "wake up" the ZNA when it goes to sleep, but that's no big deal, just a quick tap, and then you're ready to fire. So I do like a double-click when it's been sitting for a few minutes.
Fit 'n finish on the Wotofo ZNA is pretty great. No blemishes or scratches. Tube is (I think) stainless steel and the body is (again, I think) aluminum, so it's more like a ZNA Lite. The battery life at 17 watts (on a .9 Ohm coil) isn't great but I knew a 18500 (I've been using the purple flat top Efest batteries) wouldn't last all day, so I'm not complaining.
I hope that helps! I think I got mine for about $60, but the prices have gone up since then. I wouldn't spend more than about $80 for one, but that's just me.
lol, no worries. I probably just contradicted myself in the reply I just wrote. If I obfuscated anything just lemme know and I'll try to provide a straight answer.
New accessory I found at my local B&M smoke shop. Made of high grade nylon and Velcro, it is 6" x 1-3/4" x 1-1/2". It's suppose to be for a weapon or something like that but it fits my BB/2Six just fine. The clerk said "it's the only one we have left" so she sold it to me for only $5.00...not bad. I've tested my 22mm rigs and they too fit nice and snug as well. Now I need to find one for my box mod.
Jam
Jam
You and me both. Placing an order in a few days. I may redo the wood section cuz I have some access to Philippine Iron Wood.
Man, people are gonna get the wrong idea about what I'm trying to say.
Lets just say I think it looks really really groovy.
Lets just say I think it looks really really groovy.
Umm yeah that seems like a lot of work. I think I'll stick to the natural patina look.
TNS RBA by Metal Madness Vapors on top of a Precise ELA V2 by Super T Manufacturing.
Yeah, this setup has tons of potential to perform like a dripper.... that is, a dripper that holds 5.5mL of juice!
Picked up the Tesla Clone & Stillare yesterday in Indy $55.
( how bad did I get beat up ? )
Sent from my iPad using Tapatalk
- Status
Similar threads
