Picture of Your Setup Part 2!

[jumphour]

I hadn't bought any new gear in while. Got this Sapor on Monday and it's a good atty. Good buy for the money ,IMO.

Dug out a knife I hide and never use. It's too nice. LOL Cool damascus blade and bolster.

 

[defdock]

Little more work done, cleaned it up.

1.1 ohms 26g kanthal.

New mini volt battery

Fore size comparison

Trying to find someone willing to make a custom pin with more airflow for this kayfun

 

[Mike Weatherford Jr]

Little more work done, cleaned it up.

1.1 ohms 26g kanthal.

New mini volt battery [emoji14]

Fore size comparison

Trying to find someone willing to make a custom pin with more airflow for this kayfun

How do you keep your 26 gauge from springing back? I would heat and pinch like you're supposed to and mine still kept springing apart.

Sent from my LGLS740 using Tapatalk

 

[defdock]

Didn't really have an issue of it springing apart. After installing the coil, I heated it slowly till all hotspots were out, then heated red hot before I squeezed it real hard with tweezers. It was still red when I started squeezing. From there I re heated it slowly and then just wicked it after it cooled.

 

[Analias]

Here's a beauty shot of the Evic mini collection

Crown tank, Gobbler mini, and Velocity mini clone. Some of the arsenal on parade.

 

[jumphour]

I really should get some of those belt clips.

 

[vapeNoob4]

Here's a beauty shot of the Evic mini collectionView attachment 521328 Crown tank, Gobbler mini, and Velocity mini clone. Some of the arsenal on parade.

Where did you get those really interesting drip tips? Thx =)

I really should get some of those belt clips.

Eclyp

 

[Analias]

Where did you get those really interesting drip tips? Thx =)


Eclyp

Yup, Eclyp for the belt clips. I haven't dropped a mod yet that has one of those on it.

Acrylic drip tips from the nice crew at Lightning Vapes. Sean, Trevor, and co. They don't always have them in stock, but you can sign up to be notified when they're running the micro lathe. They make the best drip tip for the Gobbler mini. It has a flanged insert that sits INSIDE the top of the tank and the drip tip slides onto that. Two piece drip tip that kicks the .... of the little glass stock drip tips that magically disappear from your tank. Them are some good Humans down there at LV.

 

[jumphour]

Thank you....and I now have a black Eclyp on the way! I am totally broke, then remembered I had some Amazon credit left. I gots me a black one, should be here in a week or less!

 

[ricks]

My New...

 

[Analias]

Thank you....and I now have a black Eclyp on the way! I am totally broke, then remembered I had some Amazon credit left. I gots me a black one, should be here in a week or less!

They have a couple of different sizes and styles. All my atties and tanks are 22mm so that's the ones I have but they do make 19mm clips for nano tanks and minis. They have thick ones and thin ones, with or without carbon fiber Jwrap and in a nice selection of colors. And they really work. I put my mod in my pocket and use the clip to keep the tank/atty out of my pocket. That way when I kneel down for something I don't snap or bend the 510.

 

[Mike Weatherford Jr]

Didn't really have an issue of it springing apart. After installing the coil, I heated it slowly till all hotspots were out, then heated red hot before I squeezed it real hard with tweezers. It was still red when I started squeezing. From there I re heated it slowly and then just wicked it after it cooled.

I do the same thing. Might just be the wire I have then.

Sent from my LGLS740 using Tapatalk

 

[Djoof]

Some European inspiration

=´ Micromodz Addict `=
Gus (Mod) with Monster Mini V3 (RTA)

 

[Lova]

Here's my setups, from left to right:
Mods:
iPV3 Li
Reo Grand LP
Osmium boxmod(clone)
Hana Modz DNA20
Glas mechmod(clone)
Diablo Reaver
Delaniemods Arcabuz

Toppers:
Youde Imp
LowPro(clone)
Vicious Ant Kraken
Ax1(clone)
Derringer(clone)
GoC H-Dripper
Delaniemods Aventador

 

[KentA]

Lova,
How do you like the LowPro?
I've been afraid it would spit in my mouth.

 

[Lova]

Lova,
How do you like the LowPro?
I've been afraid it would spit in my mouth.

Annoying to build, spits quite a bit with the wrong build. Quite fun to use though, LowPro + Le Petit Gros is the smallest mod I own to-date LowPro is quite good with the right mods and build it's really nice little RDA

 

[Woofer]

LowPro + Le Petit Gros is the smallest mod I own to-date

Cool I like that alought!

 

[Lova]

Cool I like that alought!

It's tiny and doesn't really work that well for my desired vaping style. Battery life is terrible also haha! Might want to concider buying Mini Volt mod by Council of Vapor and LowPro RDA for about the same size setup as LPG + LowPro, that's in my picture

 

[Woofer]

It's tiny and doesn't really work that well for my desired vaping style. Battery life is terrible also haha! Might want to concider buying Mini Volt mod by Council of Vapor and for about the same size setup as LPG + LowPro, that's in my picture

The Mini Volt is a sweet looking little mod for sure. I have one of these Kangside Minis on the way to me Kangside Newest Mini Box Mod Vamo Box 25w-Kangside Electronic Cigarette I like small. As Kangside noted "The red fire button makes the device more fashionable and pretty"! Not as fashionable as the Mini Volt but uses 18350.

I am looking for a small dripper. I don't know that I could live with the LowPro, the drip tip would definitely have to go.

 

[vapeNoob4]

... Kangside Newest Mini Box Mod Vamo Box 25w-Kangside Electronic Cigarette ...

Now that looks pretty cool and tiny. =)