Picture of Your Setup Part 2!
- Thread starter QuietProSF
- Start date
- th_trl_thread_readers 0
- Status
I'm enjoying the Aspire Nautilus Mini on every mod I try it on
Today it's back on the Aspire CF VV
Tootle vape at 4.3V and next to smallest air opening for now
Mason approves
Today it's back on the Aspire CF VV
Tootle vape at 4.3V and next to smallest air opening for now
Mason approves
Picture of Your Setup Part 2!
Thank you
A thread dedicated to the beauty of mods and how they partain to us!
Heres one of my 4, Provari V2 Zombie edition, extended for 18650.
Crazyvapes Carto to match and an 8 year olds Rainbow Loom bracelet as the ring! lol
View attachment 297717
Thank you
I personally find People, regardless of Nationality, Race, Creed, Politics, Religion, who are easily and openly offended to be overwhelmingly,,, Offensive 
.
As I am a staunch, sworn by Oath, and unwavering Supporter and Defender of the Constitution of these United States and all contained therein whether by Word or Intent, I'm sure my Position on the previous "stuff" can be readily and correctly assumed.
However and that Credo aside, the ECF Forum IS (I believe) a Privately owned Web Forum where Membership is an applied for Privilege and Not an innate or irrevocable "Right". Therefore, the Rules & Policies of the Ownership as governed and enforced by their appointed Managers/Admins/Mods trumps and reigns supreme.
In these Interwebz Environments (same as within the Military), we may celebrate Democracy, however we do not necessarily practice it.
and if I say so myself, and I believe I will, that's usually a damn good thing
Like it or Not - It Be what it Be.
Get over it and move forward.
Or,,, Don't and Move Onward.
Now, Bring On them thar' Mahvelous, Beautiful, Bizarre, Strange, Freaky, Bad-Azz Vape Gear
Here's a "Blast from the Past" stroll down Memory Lane:
Lawdy Mercy.... Been a LONG time since dem dayz
.As I am a staunch, sworn by Oath, and unwavering Supporter and Defender of the Constitution of these United States and all contained therein whether by Word or Intent, I'm sure my Position on the previous "stuff" can be readily and correctly assumed.
However and that Credo aside, the ECF Forum IS (I believe) a Privately owned Web Forum where Membership is an applied for Privilege and Not an innate or irrevocable "Right". Therefore, the Rules & Policies of the Ownership as governed and enforced by their appointed Managers/Admins/Mods trumps and reigns supreme.
In these Interwebz Environments (same as within the Military), we may celebrate Democracy, however we do not necessarily practice it.
and if I say so myself, and I believe I will, that's usually a damn good thing
Like it or Not - It Be what it Be.
Get over it and move forward.
Or,,, Don't and Move Onward.
Now, Bring On them thar' Mahvelous, Beautiful, Bizarre, Strange, Freaky, Bad-Azz Vape Gear
Here's a "Blast from the Past" stroll down Memory Lane:
Lawdy Mercy.... Been a LONG time since dem dayz
guess you like them vivi's and pro tanks huh?I personally find People, regardless of Nationality, Race, Creed, Politics, Religion, who are easily and openly offended to be overwhelmingly,,, Offensive
As I am a staunch, sworn by Oath, and unwavering Supporter and Defender of the Constitution of these United States and all contained therein whether by Word or Intent, I'm sure my Position on the previous "stuff" can be readily and correctly assumed.
However and that Credo aside, the ECF Forum IS (I believe) a Privately owned Web Forum where Membership is an applied for Privilege and Not an innate or irrevocable "Right". Therefore, the Rules & Policies of the Ownership as governed and enforced by their appointed Managers/Admins/Mods trumps and reigns supreme.
In these Interwebz Environments (same as within the Military), we may celebrate Democracy, however we do not necessarily practice it.
and if I say so myself, and I believe I will, that's usually a damn good thing
Like it or Not - It Be what it Be.
Get over it and move forward.
Or,,, Don't and Move Onward.
Now, Bring On them thar' Mahvelous, Beautiful, Bizarre, Strange, Freaky, Bad-Azz Vape Gear
Here's a "Blast from the Past" stroll down Memory Lane:
View attachment 525285
Lawdy Mercy.... Been a LONG time since dem dayz
Did this improve flavor any or change the heat it provides? Or was this only to try to get more airflow?Do at your own risk.
Currently in my hand. 0.91 clapton.
Third pic, build is irrelevant, just "coiled" to show space.
At first, it was done to lower the coil further, then turned into a "full potato airflow" project.
Image of mod before it went into full airflow.
With the slam cap, it threads into the chimney. Depending on what kayfun base, the build deck can sit higher/lower than normal, and the base I have sits higher. I had to sand part of the pin to lower the coil or risk melting plastic.
As far as flavor, I find it did help improve it, as long as you lower the coil as far as possible without touching anything. With lowering the coil and adding wicking, there is no other space for air to flow so it forces the airflow directly onto the coil only.
Tho I can say now after using it over a week, your wicking has to be spot on and away from the posts otherwise juice can and will weep it's way down the pin and onto the 510.
They make a 4ml pin I think it is? I gave a Monster to a friend and sent the larger pin to her because she like open draw's. I cannot really comment on how much more open it is but it is considerably larger than the early one.At first, it was done to lower the coil further, then turned into a "full potato airflow" project.
Image of mod before it went into full airflow.
With the slam cap, it threads into the chimney. Depending on what kayfun base, the build deck can sit higher/lower than normal, and the base I have sits higher. I had to sand part of the pin to lower the coil or risk melting plastic.
As far as flavor, I find it did help improve it, as long as you lower the coil as far as possible without touching anything. With lowering the coil and adding wicking, there is no other space for air to flow so it forces the airflow directly onto the coil only.
Tho I can say now after using it over a week, your wicking has to be spot on and away from the posts otherwise juice can and will weep it's way down the pin and onto the 510.
There are a few v3 versions on fasttecK that have 3mm airflow but the building deck is different diameter and will not fit original kayfun chimneys. Every other "monster" base that shares the native threads I've searched for had 2mm-2.3mm stock airflow. :/
Mean time, I have a similar rta ordered and may replace the kayfun when it arrives in march.
Mean time, I have a similar rta ordered and may replace the kayfun when it arrives in march.
At one time, Yes. Back in the post-Ego/CE4 days,, they were the Diggity and that SVD was my #1 (and Only). That Pic is from about 2.5 years ago. I had just finished making the Vape Shop Junk-Juice Stand on the left.
MUCH has changed since then.
Ohmega Alpha 22mm/3-Li
- Status
Similar threads
