Picture of Your Setup Part 2!

[seek2]

Basically what I am using these days.

I mainly drip. My favorite and most used setup is my atomic on my 4nine. Its just over 4.5 inches with a 18650 so nice and small. Hybrid so hits hard. Usually build with a 24G .5 ohm single coil. Gives a great amount of vapor, but nothing deadly. I do dual 26G at times, but prefer a 24G single coil at this time. Being a hybrid style mod, it gets extremely hot with builds .3 ohms or under.

Build my Trident v2 with 24G dual coil at around .25 ohms. Its a beast from hell with a VERY warm vape. Love it, but not something I can hit on 24/7. To be honest I mainly use 0 nic juices when I vape that. I usually take it out when I am craving clouds.

Both have great flavor, atomic probably a tad better flavor, but the trident is a warmer vape due to the copper 510 as more heat gets transferred.

1) 4nine Mech, MCV Philippines Atomic RDA, Modish Metal Works Helmut drip tip.
2) Ehpro Nemesis clone, copper contacts, Grand Vapor Trident V2 RDA, JMK Drip tip

If I decide to carry a tank for some reason....

1) Aerotank Mini, Black Revolver 900Mah VV, Colored tank. (also have a few other colored tanks and a Silver Revolver. So mix and match at times)
2) RSST RBA on the 4nine with the helmut drip tip.


Aside from that, have a k100, handful of evods and twist style batteries. And a few rda clones not really worth mentioning as they are just collecting dust.

 

[sneakerpimp]

Do you only use 14500 mods and if so why if you don't mind me asking?

yes 14500 mods only. i got a LavaTube 1.0 $15 blowout special and a bunch of eGo’s but on the mech side of things it’s all 14500. i’ve always been enamoured with miniature electronics.

i had a GG clone and hated the weight and girth.. probably due to having very small hands. shorter, slimmer, lighter mods just feel right.

i don’t sub-ohm and i can get a full day of vaping on 2 batteries.

 

[autobiogphnation]

Just got the zombie ProVari mini. Currently with gotvapes fluxomizers and ego cover while I wait for the kayfun and glass drip tip to get here (will be same set up like red/black ProVari, but ss kayfun)

 

[Bryand7]

Classy! autobiogphnation


Sent from my iPhone using Tapatalk

 

[Oolong]

This is beautiful - had to look it up !

It really is next-level stuff. The modder is a huge art fan and an engineer by trade. The engravings are the best I've ever seen, and once you play with the switch, you'll be mind-blown.

 

[emonty]

Wednesday setup

 

[MasterofNone]

Basically what I am using these days.

I mainly drip. My favorite and most used setup is my atomic on my 4nine. Its just over 4.5 inches with a 18650 so nice and small. Hybrid so hits hard. Usually build with a 24G .5 ohm single coil. Gives a great amount of vapor, but nothing deadly. I do dual 26G at times, but prefer a 24G single coil at this time. Being a hybrid style mod, it gets extremely hot with builds .3 ohms or under.

Build my Trident v2 with 24G dual coil at around .25 ohms. Its a beast from hell with a VERY warm vape. Love it, but not something I can hit on 24/7. To be honest I mainly use 0 nic juices when I vape that. I usually take it out when I am craving clouds.

Both have great flavor, atomic probably a tad better flavor, but the trident is a warmer vape due to the copper 510 as more heat gets transferred.

1) 4nine Mech, MCV Philippines Atomic RDA, Modish Metal Works Helmut drip tip.
2) Ehpro Nemesis clone, copper contacts, Grand Vapor Trident V2 RDA, JMK Drip tip

If I decide to carry a tank for some reason....

1) Aerotank Mini, Black Revolver 900Mah VV, Colored tank. (also have a few other colored tanks and a Silver Revolver. So mix and match at times)
2) RSST RBA on the 4nine with the helmut drip tip.


Aside from that, have a k100, handful of evods and twist style batteries. And a few rda clones not really worth mentioning as they are just collecting dust.


View attachment 342992View attachment 342993

The 4nine is so tiny next to the nemesis seek3. Are both in18650 configuration? And do you if magnets can be swapped for the spring?

Oh, and here's my contribution:

Willow- OliveR mechanical wood bottom feeder by Pdib


Sent from my iPhone using Tapatalk

 

[super_X_drifter]

Did someone say mechanical wood bottom feeder by pdib? As in an OliveR? With a chalice by Mark bugs?

Oh cool. I can play that too

It'd be the one on the right

 

[velizabethwhite]

Hi, this is my personal vapouriser. It's just a simple clearomiser, 2-piece, and the most simplist kind I can find.

 

[Brian Roche]

The dripper for drivin, the VTR with a 28 ga kanthol ring and a kayfun is for on the job.

 

[seek2]

The 4nine is so tiny next to the nemesis seek3. Are both in18650 configuration? And do you if magnets can be swapped for the spring?

Correct, the nemesis and 4nine are both in 18650 mode.

As for the magnets on the 4nine? I'm not sure. I wouldn't think so. Its kinda a funky setup how they got it so small. One of the magnets attaches to the battery, and the other is embedded in the switch. Although its not technically a switch like other mods have. And the battery kinda floats in the mod. And then when you press the switch, it sandwiches the battery between your 510 of your atomizer and the 2 magnets to fire.

So guessing there would be no way to get this mod to work with a spring vs magnets.

 

[ions]

 

[Jomiz]

Todays setup

 

[MasterofNone]

Ok quick question for the tube users.? Thinking of getting a clone, but can't decide: gp paps, nemesis, caravela, 4nine, something I don't even know about? Smaller is better to me, while still using all three 18 series batteries. Any suggestions? Thanks guys!


Sent from my iPhone using Tapatalk

 

[XxtremeV2]

Beautiful patina.

 

[seek2]

Ok quick question for the tube users.? Thinking of getting a clone, but can't decide: gp paps, nemesis, caravela, 4nine, something I don't even know about? Smaller is better to me, while still using all three 18 series batteries. Any suggestions? Thanks guys!

Sent from my iPhone using Tapatalk

A fasttech nemesis (which is ehpro) without a doubt. Its half the price of hicigar, and better IMO.

Nemesis is all around one of the best and most reliable mechs available. Also tons of aftermarket support / items.

 

[f1vefour]

Ok quick question for the tube users.? Thinking of getting a clone, but can't decide: gp paps, nemesis, caravela, 4nine, something I don't even know about? Smaller is better to me, while still using all three 18 series batteries. Any suggestions? Thanks guys!


Sent from my iPhone using Tapatalk

I would say Stingray, it's about as small as they get without being hybrid.

The 4nine is a bit of a dangerous mod, if your atomizer 510 isn't long enough it shorts out.

 

[seek2]

Correct, the nemesis and 4nine are both in 18650 mode.

As for the magnets on the 4nine? I'm not sure. I wouldn't think so. Its kinda a funky setup how they got it so small. One of the magnets attaches to the battery, and the other is embedded in the switch. Although its not technically a switch like other mods have. And the battery kinda floats in the mod. And then when you press the switch, it sandwiches the battery between your 510 of your atomizer and the 2 magnets to fire.

So guessing there would be no way to get this mod to work with a spring vs magnets.

My bad. After reading your post I'm not not exactly sure what you were asking. 4nine has magnets by default. I had the $7 overpriced magnets in my nemesis and after a few months one broke. Didn't notice any difference anyway.

 

[RichRod]

loving this thing!!

 

[ions]

A fasttech nemesis (which is ehpro) without a doubt. Its half the price of hicigar, and better IMO.

Nemesis is all around one of the best and most reliable mechs available. Also tons of aftermarket support / items.

I 2nd the Nemesis. There are so many different versions out and most of them are pretty cheap in price. I'd def go for the Copper Nemesis or the Black Anodized Nemesis. Tried and true and have never failed me once.