Picture of Your Setup Part 2!
- Thread starter QuietProSF
- Start date
- th_trl_thread_readers 0
- Status
I have quite a few set ups, here are several of them.
I am a firm supporter of mod makers and only purchase authentics, here are some of my favorites:
But out of all of my mods, my favorite set up for daily use is:
And for those days that I visit vapor shops and for lack of better words, show off, nothing causes bigger ooh's and ah's as a one of kind Viggo with a Vapejam RDA and drip tip (shown in the back row)
Okay, yes I am trying to impress you all! LOL!
I am a firm supporter of mod makers and only purchase authentics, here are some of my favorites:
But out of all of my mods, my favorite set up for daily use is:
And for those days that I visit vapor shops and for lack of better words, show off, nothing causes bigger ooh's and ah's as a one of kind Viggo with a Vapejam RDA and drip tip (shown in the back row)
Okay, yes I am trying to impress you all! LOL!
When it comes to box mods, it is hard to beat a modified Hexohm with an authentic Tugboat built with a dual coil 24awg (six wraps on a 3/32nd rod) for a cool .28 ohms hit of Suicide Bunny Sucker Punch. Moving on, when I need the heat I turn to an unregulated Conspiracy Mods with a Vulcan built with a dual coil sleeper at .17ohms for firing up a nice hit of Holy Grail Berry Confused
For those days when I need to exorcise my wrist, I pull out number 006 of 24 in circulation, an authentic Silver Wolf Customs Kryptonite Limited Edition paired with an authentic Patriot RDA built with a dual coil 24awg, four wraps on a jewelers screwdriver, to deliver .24 ohms. This is a monster mod weighing a hair over 4 lbs.
When I really need a workout for my wrist while getting a monster hit, I turn to my authentic Dreadnaught - V1. This mod is a beast. When I first got my Kryptonite, I did not think that there was another mod in the world built as stout as it is. I was definitely surprised when a good friend of mine and vape store owner in Hawaii sent me this mod from Hell. It features its own built in RDA and I had no problem building a quad coil sleeper (with all kinds of room to spare) 20awg 4 wrap coils, delivering a torch light sub ohm at .08 ohms. This thing will send a cloud rivaling active volcanos on the Hawaiian Islands (just kidding but I think you get the idea).
When I really need a workout for my wrist while getting a monster hit, I turn to my authentic Dreadnaught - V1. This mod is a beast. When I first got my Kryptonite, I did not think that there was another mod in the world built as stout as it is. I was definitely surprised when a good friend of mine and vape store owner in Hawaii sent me this mod from Hell. It features its own built in RDA and I had no problem building a quad coil sleeper (with all kinds of room to spare) 20awg 4 wrap coils, delivering a torch light sub ohm at .08 ohms. This thing will send a cloud rivaling active volcanos on the Hawaiian Islands (just kidding but I think you get the idea).
Beautiful mod and RDA. What can you tell us all about the Dark Horse. I have a lot of nice RDA's but have not obtained a Dark Horse yet. Are they worth the money? Pros? Cons?
Nice thing about living in LA- drive and pick up an origen genny and a hobo
Lol
That V2 is the smitt. Its on the want list for sure.
Using my IPV2S right now though.
Attachments
Last edited:
I really like the drip tip on the first one. Who makes that? Do you possibly have a link where I can obtain one. I am sure LA is full of places you can get just about anything you want. Though I live in a small college town in Texas, we have a vape shop here that sells a wide variety of authentic mods and I have made friends with the owner who has hooked me up with a lot of suppliers and mod makers, who have helped me in building a pretty large collection of mech's and RDA's.
I've been loving this RDA, I running a .4 dual coils any where from 40 watts all the way to about 65 watts. flavor is great with it, vapor production is incredible too. although theres many types of ways to adjust airflow, even on the most restrictive setting your still sucking in massive amounts of air. So i mean, its personal preference whether you would like something like that. I haven't noticed any other cons other then that. everything seems tight and secure, screws aren't loosening up at all and the threads on the whole rda are very smooth and satisfying to put together. whats good about it too is you can run a single coil with a single air hole. also dissipates heat very well. so over all I'm definitely happy with the purchase, and its been my go to rda since I've had it. btw had it for about a week now.
Very nice collection. I love your avatar. Holy Grail is absolutely the best out there. I vape Berry Confused regularly. It is so pure that even after weeks of vaping on the same coils, they are as clean as the day I installed them. (well almost, but I think you may get the idea)
I love the copper Mutant. I just recently acquired an authentic stainless steel version of that mod. Is the Stingray a JD Tech? I ended up buying three of them before I actually ended up with an authentic (darn eBay...lol). I don't recognize the white one in the middle. Who makes it?
I really appreciate the information. Though I have bought a lot of authentic RDA's, I pretty much use the Tugboat, Stillaire and Patriot RDA's. I just recently bought a couple of Plumes, a Catz and a Vulcan. All of them have their pro's and con's. So far, I like the Tugboat's the best, but the Patriot's are definitely a close second. I am going to buy me a few of the Dark Horse RDA's after reading your review of yours. I really like the way it looks and I think it is definitely worth adding to my collection. Thank you very much for your input!
Thanks! The mutant was actually my first vape purchase and will be my patina project! The SS SRX is by SXK. The White SRX is from a sample batch I ordered from a manufactruer called Shenzhen Phimis Technology Co., Ltd. To the right is my copper Tres Evo and Emma (sucks I didn't capture the full engraving).
np dude, i will take it apart in a little bit and post some up close pictures so you can really see inside
I am a Director of Engineering for a large pharmaceutical company. I travel in an out of Shenzhen on a regular basis. I have been in the plant of the company you mentioned. They make a lot of mods for a lot of people. I am definitely going to have to get a hard look at one of those upclose. They definitely look like a very nice mod.
If you get a chance, scroll back a page or two in this thread or visit my profile page, to see some of the mods I have collected. I don't collect clones but have a very diverse collection of mechanical mods, many first run. Pay close attention to the copper Viggo. It came from the mod maker and it is the only one of its kind in the world. (my most prized mod..smile)
Last edited:
I have heard a lot of people mention your box mod but I have not ever seen one up close. Is it dual battery? Regulated? If so, how many watts? I really like the size of the tactical firing button on yours. I only have two box mods, one regulated (Hexohm) and the other unregulated (Conspiracy Mods). Both are dual batteries and so far I have not found a build (sub-ohms) that they wont fire.
View attachment 387712
By the way I see your new here. Welcome to ECF. This is a great place with tons of information and a lot of old timers that have a wealth of knowledge to share.
Last edited:
Very cool, sweet collection you have there. What I love about the Mutant is that I'll be able to custom engrave my designs on it, I'm thinking something sorta like the Steampunk, but with various elements. The white SRX definitely requires some tlc to make it right, but it is a looker.
yupp, dual 18650's, i believe if fires all the way down to a .2. goes from 10 watts all the way up to 100 watts. back panel is held on with magnets and screws, although i never put the screws in because the magnets work very well. cover has never fallen off. Also adjustable pin which is great. i took the dark horse apart to but for some reason it won't let me upload those pics. i'll try again later on
- Status
Similar threads
