My new, belowed "Taxeusz" powered by SX350.
Now waiting for DNA40 version...
Now waiting for DNA40 version...
Picture of Your Setup Part 2!
- Thread starter QuietProSF
- Start date
- th_trl_thread_readers 0
- Status
After some o-ring wrangling, finally got my Taifun GT II clone running without massive leaking! Big thanks to DWCraig on one of the Taifun GT threads!
Here it is on my Gus Lord clone:
TGT II and Gus Lord clones by zipflint, on Flickr
And here's the GT II by itself:
Taifun GT II clone by zipflint, on Flickr
Here it is on my Gus Lord clone:
TGT II and Gus Lord clones by zipflint, on FlickrAnd here's the GT II by itself:
Taifun GT II clone by zipflint, on Flickr
My classic mod customization finally ended temporarily-
until my Nef'i Nemesis set arrives I present:
Brass Chi You- Copper LE Nef'I Caps- Orchid V1- SoV Copper Top Cap- MLV DT
Nemesis Copper Matte- Atmomixani Brass Hybrid Adapter- Tobh V2- Tobh Copper Slam Cap
Nemesis Custom- Back 18650 Aluminum Tube- CNC Engraved Zodiac Switch- SS Brushed Lock Ring- Atmomixani Brass Hybrid Adapter- Kayfun 4- 4s kit- Smok M-tank- SoV Prototype Finned Top Cap- MLV Gun Metal
PRETTY HAPPY TONIGHT!
I did not like the SoV Nemesis Recessed Switch- considering their work for Kayfun and Orchid, they could do better.....
I am waiting for a set of Nef'I SS Nemesis Caps!!!
Decided to wait a bit and get a tricked out Taifun GT 2- unless i hear otherwise on this thread- could someone kindly tell me what the changes really are?
is it really better?
thx- ev
until my Nef'i Nemesis set arrives I present:
Brass Chi You- Copper LE Nef'I Caps- Orchid V1- SoV Copper Top Cap- MLV DT
Nemesis Copper Matte- Atmomixani Brass Hybrid Adapter- Tobh V2- Tobh Copper Slam Cap
Nemesis Custom- Back 18650 Aluminum Tube- CNC Engraved Zodiac Switch- SS Brushed Lock Ring- Atmomixani Brass Hybrid Adapter- Kayfun 4- 4s kit- Smok M-tank- SoV Prototype Finned Top Cap- MLV Gun Metal
PRETTY HAPPY TONIGHT!
I did not like the SoV Nemesis Recessed Switch- considering their work for Kayfun and Orchid, they could do better.....
I am waiting for a set of Nef'I SS Nemesis Caps!!!
Decided to wait a bit and get a tricked out Taifun GT 2- unless i hear otherwise on this thread- could someone kindly tell me what the changes really are?
is it really better?
thx- ev
@zipflint, I'm sure you've been answered this question before but what camera are you using?
Excellent shots bro and thanks.
Excellent shots bro and thanks.
It's a Nikon D80. A little long in the tooth but it has served me very well!
And the lens is a Micro Nikkor 70mm macro lens. Bought it used and it's been my go-to lens for all my vaping photos.
And a super cheap tripod for all the long exposures that I do.
Hope that helps, and thanks for asking!
And the lens is a Micro Nikkor 70mm macro lens. Bought it used and it's been my go-to lens for all my vaping photos.
And a super cheap tripod for all the long exposures that I do.
Hope that helps, and thanks for asking!
Origen V2 with a Dynasty Royal Edition Black Ice... Clones
On the repaired (FD Vapes 510 V4) WeeLeaf iStick, good until my IPV2s eventually gets here...
On the repaired (FD Vapes 510 V4) WeeLeaf iStick, good until my IPV2s eventually gets here...
I like the Origen V2 drippers a LOT (got two of 'em in constant rotation) but the draw it just a little
bit restricted for me. Are there any custom caps for them? Because every time I get the dremmel out, it has to be
with the understanding that I may very well bugger it all to damnation.
bit restricted for me. Are there any custom caps for them? Because every time I get the dremmel out, it has to be
with the understanding that I may very well bugger it all to damnation.
Origen V2 with a Dynasty Royal Edition Black Ice... Clones
On the repaired (FD Vapes 510 V4) WeeLeaf iStick, good until my IPV2s eventually gets here...
I like the Origen V2 drippers a LOT (got two of 'em in constant rotation) but the draw it just a little
bit restricted for me. Are there any custom caps for them? Because every time I get the dremmel out, it has to be
with the understanding that I may very well bugger it all to damnation.
This is my first Origen and I have not seen any other top caps... I was pondering drilling out the air holes but it might just make it a little to close to the edge of those fine o-rings underneath. This one whistles badly on max airflow as well.
if you go the dremmel route don't make the same mistake I did! I enlarged the holes of the top cap and afc at the same time instead of one by one, now the metal fused and I have no way of removing nor rotating the AFCI like the Origen V2 drippers a LOT (got two of 'em in constant rotation) but the draw it just a little
bit restricted for me. Are there any custom caps for them? Because every time I get the dremmel out, it has to be
with the understanding that I may very well bugger it all to damnation.
Ah, good tip! That's what I probably would've done myself!
if you go the dremmel route don't make the same mistake I did! I enlarged the holes of the top cap and afc at the same time instead of one by one, now the metal fused and I have no way of removing nor rotating the AFC
I got into a redneck modding mood...
first the franken paps orchid ignition thing
4nine 350, orchid | gp paps 18490,orchid
gp paps 350 tube and switch, brass plate connecting the bat with a magnet to nemesis top cap for positive connection, had to pit a bit of copper wire there as the orchid tank protrudes a bit so wont let the brass tube touch the metal base of the orchid but makes a nice little mod feels great in the hand and like the top switch, I'll do a more permanent solution out of wood when I find the time to do so
__________________________________________________________________________________________________
then my first mech mod box just using pliers and a small knife (sorry no duck tape this time)
just used stuff that I had laying around...
I didn't use a 510, just fastened the rda with the ring that comes with a 510 connector from fasttech so it is an hybrid
some solid copper wire, nemesis magnets and those battery cases you get when you order bats
performs great! I don't think you need to see the internals
once I fine tune the switch and reduce the throw I'll add a wood vinyl wrap to it
once my "varitube" 510 come I'll try a bottom feeder with the same enclosure
first the franken paps orchid ignition thing
4nine 350, orchid | gp paps 18490,orchid
gp paps 350 tube and switch, brass plate connecting the bat with a magnet to nemesis top cap for positive connection, had to pit a bit of copper wire there as the orchid tank protrudes a bit so wont let the brass tube touch the metal base of the orchid but makes a nice little mod feels great in the hand and like the top switch, I'll do a more permanent solution out of wood when I find the time to do so
__________________________________________________________________________________________________
then my first mech mod box just using pliers and a small knife (sorry no duck tape this time)
just used stuff that I had laying around...
I didn't use a 510, just fastened the rda with the ring that comes with a 510 connector from fasttech so it is an hybrid
some solid copper wire, nemesis magnets and those battery cases you get when you order bats
performs great! I don't think you need to see the internals
once I fine tune the switch and reduce the throw I'll add a wood vinyl wrap to it
once my "varitube" 510 come I'll try a bottom feeder with the same enclosure
Here's a couple more pics of my recent builds. All Parallel 18650's, Mosfet boxes.
Last edited:
Loving this.
That a SMPL? Looks like it to me. I absolutely love mine. I run my Hobo on it and it is fantastic.
That it is. Just got it in last night. It is fantastic. Love my hobo as well. I use it for nickel builds on my vaporshark.
- Status
Similar threads
