ATTENTION: DO NOT USE e-liquids THAT ARE KNOWN TO CRACK tanks WITH THE PCHELA
WE HAVE FOUND THAT JUICES THAT CAN CRACK tanks CAN DAMAGE THE PCHELA FINISH
ON THE INSIDE OF THE TANK. IF YOU ALREADY HAVE A PCHELA FROM VAPEBASH AND WOULD LIKE
TO HAVE YOUR TANK UPGRADED TO STAINLESS PLEASE CONTACT US AND WE WILL HAVE IT DONE.
THE PROCESS WILL TAKE ABOUT A WEEK AND YOUR SERIAL # WILL ALSO BE ON YOUR NEW TANK SECTION.
What happened? Well Mike himself did some very extensive testing and was comfortable that this would NOT happen. We have a Pchela here.. And we were using Shocker in there. We replaced the Ceramic wick with a new one and it was a little tight and nicked the powdercoat in there. After a little while we noticed that the coating was "wilting" inside and starting to look like what happens when you put paint thinner on paint. So we will be sending this one back to mike to have a stainless top section installed. We have halted the production on the last 100 for the moment so we can get more stainless top sections made and they will come with Stainless top sections now.
If you are at all concerned and are a frequent user of juices you think may be acidic enough to have this happen to your Pchela.. Please contact us. We will have you send your unit into mike, He will Then engrave a new top section with "PChela ##" and we will get it back out to you. But since we have to have your Serial etc.. The process will take about a week turn around.
Thank you for your understanding. We will do our best to make sure everyone is happy and taken care of in as timely manner as we can.
WE HAVE FOUND THAT JUICES THAT CAN CRACK tanks CAN DAMAGE THE PCHELA FINISH
ON THE INSIDE OF THE TANK. IF YOU ALREADY HAVE A PCHELA FROM VAPEBASH AND WOULD LIKE
TO HAVE YOUR TANK UPGRADED TO STAINLESS PLEASE CONTACT US AND WE WILL HAVE IT DONE.
THE PROCESS WILL TAKE ABOUT A WEEK AND YOUR SERIAL # WILL ALSO BE ON YOUR NEW TANK SECTION.
What happened? Well Mike himself did some very extensive testing and was comfortable that this would NOT happen. We have a Pchela here.. And we were using Shocker in there. We replaced the Ceramic wick with a new one and it was a little tight and nicked the powdercoat in there. After a little while we noticed that the coating was "wilting" inside and starting to look like what happens when you put paint thinner on paint. So we will be sending this one back to mike to have a stainless top section installed. We have halted the production on the last 100 for the moment so we can get more stainless top sections made and they will come with Stainless top sections now.
If you are at all concerned and are a frequent user of juices you think may be acidic enough to have this happen to your Pchela.. Please contact us. We will have you send your unit into mike, He will Then engrave a new top section with "PChela ##" and we will get it back out to you. But since we have to have your Serial etc.. The process will take about a week turn around.
Thank you for your understanding. We will do our best to make sure everyone is happy and taken care of in as timely manner as we can.
I'll keep you posted.
