right seems to b working fine again, its set at23.5watts,ohms ive unlocked and there at0.15
PLEASE HELP
- Thread starter guccirush9876
- Start date
- th_trl_thread_readers 0
- Status
I just don't get it, it works then stops, it flashes temp control, and low atomizer
to b honest I don't know the difference, I know when I push the middle button I set the w at 15w then I push the middle button again and it says 255c
If its in watts your in power mode i believe..it should say joules since your using temp control coils..thats what the blue o ring means on your coil..so if you got the instruction booklet give a look over and switch from power to joules
That would be my guess too. If you fire a TC coil in power mode it will get SUPER HOT and ruin the coil, plus it can produce TOXIC vapor. Be careful with the TC thing. Make sure you read up on how the mod works.
wow really I didn't know that, I seem to be ok now this is what my settings are at 315c 1.15 ohms, and at bottom left it says 40w
but when I just pushed the middle button it says im at 19w0,14,ohms and 1.64v but wont let me vape
That should be more like 0.15 ohms. The wattage in TC mode just determines how fast the coil heats up to the temp you set.
And 325c is really hot. like at the far top end of what you want to vape. Try it at something closer to 230c.
I for some reason also have an issue with Especially my rebuilt GS coils taking up juice for those first hopefully GOOD drags.
I go out of my way to be sure there is juice in the coil, a drop or two on each slit in the shroud and 4-5 drops down the top tube and I STILL let it wait a few minutes once all put back together. Then, take a couple draws on it With No Power. At least then, theoretically, you should not get a dry hit.
Now, yeah, it may gurgle a bit at first but you can either shake that out or turn up the voltage and vape it out. I usually do the "thermometer shake" thing once and it's clear. A little starting gurgle beats a dry hit any day.
I posted before about rebuilding your Protank coils. If you can rebuild your Protank coil you can rebuild the GS Air coil too. Our own Cheech did the GS Air rebuild vid. The GS's shroud and wrap are a little bit of a pain to deal with when rebuilding, but basically getting free coils makes it worth it.
I didn't see anyone stressing getting the coils wet on the GS when I researched them but you Really Need to be sure they are wet before you fire them.
Bruce in Ocala, Fl
I go out of my way to be sure there is juice in the coil, a drop or two on each slit in the shroud and 4-5 drops down the top tube and I STILL let it wait a few minutes once all put back together. Then, take a couple draws on it With No Power. At least then, theoretically, you should not get a dry hit.
Now, yeah, it may gurgle a bit at first but you can either shake that out or turn up the voltage and vape it out. I usually do the "thermometer shake" thing once and it's clear. A little starting gurgle beats a dry hit any day.
I posted before about rebuilding your Protank coils. If you can rebuild your Protank coil you can rebuild the GS Air coil too. Our own Cheech did the GS Air rebuild vid. The GS's shroud and wrap are a little bit of a pain to deal with when rebuilding, but basically getting free coils makes it worth it.
I didn't see anyone stressing getting the coils wet on the GS when I researched them but you Really Need to be sure they are wet before you fire them.
Bruce in Ocala, Fl
- Status
Similar threads
- Locked
