Premiering at GotVapes - The NEW eGrip OLED by Joyetech 20W Easy VW Complete Kit

[dannoman]

​

NEW eGrip OLED by joyetech 20W Easy VW Complete Kit - Cherry Red & BLACK
($69.95) $54.95

Premiering the joyetech eGrip OLED VW mod Kit at GotVapes - ONLY $52.20 with Newsletter VIP discount through May 18th!

Joyetech has brought the most loved, all in one, compact variable wattage ecig mod starter kit , now with OLED screen on it; this new version is called the Joyetech eGrip OLED / Joyetech eGrip 2.0 . The OLED screen displays the current setting of the eGrip OLED such as Watts, Volts & Resistance.

Joyetech eGrip OLED feature the new built in vape tank with changeable coils on it, having a clear window to show the ejuice in it. Joyetech egrip OLED features 360 degree rotating ring to adjust the wattage. eGrip has a side inlet for ejuice refilling ( EASY!). Joyetech egrip OLED is a variable wattage device with battery capacity of 1500mah rechargeable battery; eGrip takes 1.5 ohm dual coil atomizer heads / eGrip CS heads specially designed for eGrip for a high quality vaping experience by Joyetech. Battery has max output of 20 watt and 5.5 volts.

The output Wattage of eGrip OLED can be easily adjusted by rotating the ring on side in clockwise and counter clock wise direction. There is air flow inlet adjustment screw at the bottom , loosen the screw for more air flow . For ejuice filling egrip has side window, just pull open the lid and carefully fill the ejuice in the hole; close the lid after filling the ejuice.

For replacing the CS atomizer head in egrip , unscrew the big screw at the bottom and the atomizer head is located on the base. Carefully unscrew the atomizer head from base and replace with a new one. Screw the base with new coil back in to the egrip.

Charging Joyetech egrip OLED is very simple , just plug the Micro USB cable into the port at the bottom and plug it into the wall adapter.

For Further detail Refer to the User manual provided in the box.

Package Includes:

1. 1 x eGrip Mouth piece
2. 1 x eGrip OLED Mod
3. 2 x eGrip CS atomizer heads
4. 1 x eGrip Atomizer Base
5. 1 x 1A wall Adapter
6. 1 x Micro USB Cable
7. 1 x User manual & Warranty card

Features:

• Power 20 W (5W-20W - no menus- easy twist dial atop)
• Internal 1500mah rechargeable battery
• Transparent Window
• Convenient eJuice filling (side inlet)
• Air Inlet control with tool
• All metal design , compact , all in one & portable
• Easily replaceable CS atomizer heads (1.5ohms)
• Can be used a a pass-through while charging
• It reads "Sub Ohm Solution" on the box but we could not find info right now on how far down you can go. We'll try to update this here and on our forum when we find this info

Forgive us? This is Brand New on the market and this German review posted just today (May 7th) is all we could find on Youtube.



NEW Joyetech eGrip OLED 20W : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[dannoman]

We do have the Sky Blue, Pearl Whie and Silver still winging their way to us and comign in stock along with RBA base, 510 Adapter, and extra pre-built eGrip coils (1.2ohm) with wire twisted wrapping cotton and ready to purchase and screw into your RBA base...

 

[Tpat591]

Found it - If Atomizer Resistance is below 0.4ohm display will read Low Resistance.

 

[dannoman]

Found it - If Atomizer Resistance is below 0.4ohm display will read Low Resistance.

Thank You! So you have found where it says goes as low as .5ohm?

 

[Tpat591]

.4ohm, below that it reads low resistance. It is one sentence in manual 1/2 - 3/4 of way down on page 4 possibly?

 

[dannoman]

.4ohm, below that it reads low resistance. It is one sentence in manual 1/2 - 3/4 of way down on page 4 possibly?

Super thanks for the clarification