Problem with ego Tank atomizer

Status
Not open for further replies.

P-Dub

Super Member
ECF Veteran
Verified Member
Jan 31, 2011
342
595
Santa Rita,GU, USA
Do you have a Ohm meter. Place setting on the upside down horse shoe sign, Place the positive probe(Red) on the center post of your atty and the negative(Black) on the threads. If so you can test to see if there is a reading something around 2.2-3.0 depending on the atty you got. Another option is to try and CAREFULLY pry up the center contact on the atty to make sure that you get a good contact. Use something like a dental pic and pry up A LITTLE on both sides to raise the center post to make contact with your battery. Make sure you punctured your tank completely and remove the hanging chad on the tank cap. Press the battery button after you have tried all this or first off and put the atty to your ear while pressing the button and see if you can hear it in operation. You should be able to hear is sizzling, hissing or popping. If you hear nothing and you have tried all the above chances are you have a DOA atty in which case you will want to contact the vendor you purchased from and get a credit for a new one.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread