Problem with Ego Type B Atty

Status
Not open for further replies.

mightypirate

Full Member
Verified Member
Nov 29, 2011
50
11
38
virginia
So I recently ordered two Type B Atomizers from ecigsupply after having some bad luck with litecig (3/5 atomizers wouldn't work, wouldn't help me at all). So I opened up the first one and saw a metal bridge where the wick should be, looks like the old Blu Cig atomizer inside. I can't get my tanks to fit in them, the metal bridge keeps the tank from seating properly. What are these things? I emailed ecigsupply and hopefully they'll help me with this. Here's a picture of the inside of the atomizer.

IMAG0019.jpg

Also, if anyone has a supplier for type b atomizers that wont arrive doa, or at least let me return them if they do I'd be in your debt.
 

Killjoy1

Ω Destroyer
ECF Veteran
Verified Member
Aug 15, 2011
9,304
9,365
46
New Hampshire, US
Those are Type B atomizers, for use with the appropriate cartridge (or you can drip in them). Those are different from the eGo-T Type B, which are intended for use with the Type B tank carts. I've seen a lot of people in the past get those two mixed up, some vendors that carry both don't distinguish between the two very well and newbies get confused

I'm assuming this is what you bought, but this is what you thought you were getting (on that page, for the Type B tank atty use the drop-down selection menu). Like I said, I've seen this happen before and maybe the vendor will help you out if you explain the mix up.


I hope I understand your situation properly and that information helps you :)
 

mightypirate

Full Member
Verified Member
Nov 29, 2011
50
11
38
virginia
That does seem to be the issue, I ordered 1 "ego Mega Atomizer" and 1 ego-t Atomizer (model numbers 1294 and 1345 respectively). Since I wasn't sure what the difference was (now I know) So it seems like one of them should have the metal bridge, but the other should be for use with the tanks. So it seems like there's still a mix up on their part for one of them. Hopefully they'll replace that one, I'll eat the cost of the other one since it is apparently my fault.

Thanks for the help and clarification. I cant deny, I feel an idiot. Live and learn.
 

Killjoy1

Ω Destroyer
ECF Veteran
Verified Member
Aug 15, 2011
9,304
9,365
46
New Hampshire, US
Eh, we all make mistakes. I know I've made my fair share.

I have no experience with that vendor, but I'm sure they'll work with you to sort the issue. Vaping can be quite a confusing world to step into, what with all the different bits 'n bobs of hardware out there, and any vendor worth their salt will at the very least try to help with useful information. I know that if some of the vendors I dealt with early on hadn't been so helpful for me then I probably wouldn't have stuck with it and gone back to smoking, myself :)
 
Status
Not open for further replies.

Users who are viewing this thread