Problem with Innokin iClear 16

[Sines]

So I just received 2 vision spinners and 2 innokin iclear 16 clearomizers. Both spinners work fine with one of the clearomizers but when I try the other one the spinners manual button just keeps flashing when I press it.

Any suggestions on what the problem may be?


Sent while poopin'

 

[jefsview]

You might have a bad coil. Sometimes a bad one will be shipped with it. Did you buy some extra coil heads for your iclears? If you did, try changing it out.

If not, empty it out and see if the coil head is lose.

I hope you get it sorted out.

 

[Sines]

I cleaned it out and everything seems to be working fine now. Not sure what the problem was but I'm glad it's all sorted out.


Sent while poopin'

 

[Scott Ballentine]

I take all of my clearomizers apart before I use them the first time. I reseat the head - snug them down but make sure you don't over-tighten because you can cause the o-rings to compress, extrude or otherwise fail to the point you get leaks. Sometimes if the wicks are a bit too long I snip the tips just a bit.

 

[ph0kused]

Not sure if we're talking about the same thing, but I just bought 2 Innokin iClear16's.

My eVic reads it at 2.1ohms. I vape at 6.4w / 3.66v - It really has a versatile range for vaping. I've found the sweet spot can be anywhere from 3.5v to 4.4v

I also own a 1.8ohm vivi nova

I vape Boba's from AVE everyday 12mg - 24mg nico, depending on how im feeling.

The taste I get from my iClear16 is muuch different compared to my vivi nova, I think I like the iClear's taste better, it gives off a more "honey" taste to Boba.

All in all, a great tank in my opinion...mainly because the "sweet spot" has such a vast range.