Protank Vape Production?

[obsidianchao]

I feel like my protank's vape production is decreasing. It might just be my eyes, dunno. Any idea on how to increase vape without rebuilding a coil?

 

[Vap3ster]

I was actually just about to make a post about the same exact thing. But I feel it does it even with a new head/coil.
I have seen them come with 2 different beauty rigs one with cut outs one without, the ones with cutouts have a more open draw.
Im planning on drilling out one of the holes on the base a bit see if it helps.

 

[obsidianchao]

I was actually just about to make a post about the same exact thing. But I feel it does it even with a new head/coil.
I have seen them come with 2 different beauty rigs one with cut outs one without, the ones with cutouts have a more open draw.
Im planning on drilling out one of the holes on the base a bit see if it helps.

Well, it appears that about halfway through a tank the vape gets thicker. Weird, if you ask me.

 

[corey5188]

The pressure in the tank changes as the level drops. I think that aids in wicking when it gets around half way....

 

[otiose]

vapor definitely drops as the juice hits about 1/3 of the tank (due to pressure of the tank). Either from that it shouldn't be less vapor.

 

[M_DuBb716]

I've been feeling the same way. I've only had my PT for 3 days and it seems like it's giving me thinner vapor, and less of it - I like thick vapor.

And I usually like a tighter draw, but I screwed on a new EVOD coil-head (1.8ohm instead of 2.5), but it seemed even worse at the same wattage. Now I regret buying the 1.8ohm EVOD heads for my PT, I usually like lower-resistance too, but the standard 2.5ohm PT head seams to work the best for me

 

[obsidianchao]

I ordered a vision spinner, thinking maybe the extra voltage will help.

 

[FACE MEAT]

I ordered a vision spinner, thinking maybe the extra voltage will help.

Assuming you've currently got a Protank with the 2.5 ohm head atop a 3.7V battery, your vapor/flavor/throat hit are going to be anemic. Somewhere between 4.2 and 4.8 volts would get you the best results. Your new Spinner will get you there.

 

[Flyer]

I'm guessing that the reduction in vapor when the juice level gets low is due to a bit of excess juice on the coil from to the slight pressure change in the tank and is probably also related to the gurgle some experience. A simple cure could be to take the tank off when the juice level is about 1/2, invert it, loosen then retighten the bottom cap to equalize the pressure, reinstall the tank and then resume vaping. Personally, I haven't experienced the vapor reduction or the gurgle when the tank gets low (yet).