Quad staggered "Radial" build on the 454 Big Block RDA (deedupdex build)

[deedupdex]

Quad staggered "Radial" build on the 454 Big Block RDA by kryptonitetanks (Kryptonite Vapor) courtesy of epikvape 24g 3/32 I.D 5 wrap on the upper coils and 1/8 I.D 5wrap on staggered offset bottom coils. This is the fun part of the testing as I get to slap anything I want into the rda!!! "Radial" comes from an aircraft engine. What better to slap it on a 454 Big Block rda. It's a bit cramped especially with the big 1/8 I.D coils in between but it worked out well. Airflow is not bad as I tried to leave spaces in between thus the only way to wick it was like this to let airflow through. Ramp time from cold static was about 2 seconds with a fully charged vtc4.
My go to testing daily build on the 454 was a dual vertical side by side (parallel) @ around .16ohms. I had other ideas for this dripper but I just had to do a radial engine looking first. Remember to vape safe, learn and master the safety precautions and encourage proper vape etiquette! Thanks vapefam have a great weekend! If you want to check out my other stuff just visit facebook.com/deedupdex or instagram.com/deedupdex or please come say hi on my ECF thread here: http://www.e-cigarette-forum.com/forum/coil-builds/530367-deedupdex-builds-variety-builds.html

Fire clip please turn speakers down then click the picture!
Fire clip please turn speakers down then click the picture!
Fire clip please turn speakers down then click the picture!

 

[juggalofisher88]

Awsome looking build
Is it just me but all your vids hit me with this

 Invalid URL: http://"http://scontent-b.cdninstagram.com/hphotos-xpa1/t50.2886-16/10533866_681005295321725_255581830_n.mp4"

Your gonna make me get an istagram account just for yoyr builds lol

 

[deedupdex]

Awsome looking build
Is it just me but all your vids hit me with this

 Invalid URL: http://"http://scontent-b.cdninstagram.com/hphotos-xpa1/t50.2886-16/10533866_681005295321725_255581830_n.mp4"

Your gonna make me get an istagram account just for yoyr builds lol

Thanks brotha not sure but try this

http://scontent-b.cdninstagram.com/hphotos-xpa1/t50.2886-16/10533866_681005295321725_255581830_n.mp4

 

[ElConquistador]

That's about the coolest build I've seen yet!

 

[deedupdex]

That's about the coolest build I've seen yet!

Thank you for checking it out brotha! tough crowd to please here in ECF but reply's like this just makes it worth it. Thank you once again

 

[Maurice Pudlo]

Thank you for checking it out brotha! tough crowd to please here in ECF but reply's like this just makes it worth it. Thank you once again

Your builds are incredibly fun to witness, keep on doing what you do. You inspire plenty of people here and elsewhere.

Maurice

 

[Mr. Anderson]

That is crazy. Your builds are inspirational. I didn't even know people could do stuff like this.

 

[CRW78]

Looks sweet! How's it vape? Looks like it could offer some pallette - scorching heat!! I enjoy your builds and have done my best to duplicate a couple with some decent success. Keep 'em coming!

 

[deedupdex]

That is crazy. Your builds are inspirational. I didn't even know people could do stuff like this.

Looks sweet! How's it vape? Looks like it could offer some pallette - scorching heat!! I enjoy your builds and have done my best to duplicate a couple with some decent success. Keep 'em coming!

Thank for checking them out guys and actually commenting. Its warm due to the wicks being a bit tight. But the 454 has 4 big intake holes that can even out the mixture pretty well!

 

[Joshua Elias]

That build is straight up beast I'm going to have to try it in mine haha

 

[CloudsinCrowds]

Uh oh more builds to waste all my kanthal!
Thanks deedupdex! Your builds always make me want to build something. Very well done sir.

 

[Froth]

That's dope looking, when you look at it from directly above it looks kind of like an old Radial airplane engine! Awesome build, truly inspiring.

 

[Dshobe]

Wow! I just got started building my own coils, but I have to say, that is art! Makes me think of a rotary engine for sure!

 

[Nuggit]

This may be dumb for you pros, but im a newb by free admission.
So, the small coil on top of the bottom one that is, if I get this right, is not really running in series due to the fact of this being resistive wire without a "normal" electrical series connection I'm used to. I'm getting lots of advice about simple, yea, yea, boring to me. I've got my modified rigs I vape on all day, they work great.
That said, amazingly awesome rig! You rule. My hero, ect. Truly. I don't have to get that good, but I love to let my imagination to run free even if it doesn't work well. Thanks for inspiration.