question for reomizer....nauts

[Equality 7-2521]

Hey all reomizer fans,

I have a question I hope you can help me with.I don't own a bottom feeder so I don't know the parameters of what a reomizer can or can't do.I would like to use a fc-2000 porous ceramic wick in a reomizer. The wick is 1/8 inch in diameter.My question is...when you squonk juice into the atty, will the juice rise high enough to cover an 1/8 inch wick, or will it only rise only enough to get the bottom of the wick wet, and depend on the fc-2000 to wick up the juice.

Thanks,

 

[super_X_drifter]

Hey all reomizer fans,

I have a question I hope you can help me with.I don't own a bottom feeder so I don't know the parameters of what a reomizer can or can't do.I would like to use a fc-2000 porous ceramic wick in a reomizer. The wick is 1/8 inch in diameter.My question is...when you squonk juice into the atty, will the juice rise high enough to cover an 1/8 inch wick, or will it only rise only enough to get the bottom of the wick wet, and depend on the fc-2000 to wick up the juice.

Thanks,

I can squonk to get the juice to bubble up to the top of my horizontal 1/16" coil that sits about 1/16" off the deck, but 1/8" + deck clearance might be pushing it. You will most likely need to rely on a little wicking action with a 1/8" thick horizontal coil. A pool that deep would likely produce a less than ideal vape by drowning (choking / overcooling the coil) and may ooze from the air hole too.

The atty drains pretty well, but not perfectly. If your constantly squeezing in that much juice, you will likely have instances of flooding.

Might I suggest a 1/16" thick coil with a rolled cotton wick like this: http://www.e-cigarette-forum.com/forum/showpost.php?p=8848169

The RM2 shines with these micro coils

Good luck bro !