Question/problem with Reo Mini air draw

[Illuminatu]

Hi Reonautis ,

I'm having a funny thing happening on my mini, for some odd reason i find it hard to draw since i got it, but i tought my carto's or atty's where to blame!! So yesterday night i decided i would try the same carto i use on my mini on my grand .... and same for the atty ... well oddly enough the draw is much much easier on my grand running a 3.7 volts that it is on my mini. I tried a few things on the mini to see if i was doing something wrong i even unscrewed the carto and atty to the point where it had a better draw but no connection and wouldnt fire. Is this normal in the conception of the mini or is there something wrong with my mini ?? If anyone can chime in I'll be glad to try any solutions before having to send it back to Rob !

Thanks

 

[Mvgratz]

Usually its caused by the o-ring in the top of the cap. If the cap is screwed on too tighly it will restrict the air flow too. Try this, unscrew your atty or carto, unscrew the bottle, and place a napkin or piece of toilet paper under the end of the feed tube. Now blow through the catch cup. If airflow is "normal" then its either the oring is cocked or the bottle was screwed on too tighly. If its still restricted, then there is a clog in the feedtube. Usually these can be "blown out".

 

[redeyedancer]

Make sure the end of your feed tube isn't resting on the bottom of the bottle or the side wall.Keep us informed

 

[Illuminatu]

Well thanks for the advice guys, I think i managed to unclog it or fix it , I used a .20 gauge unwounded guitar string down the whole tube from the cup and wiggled it a bit like a plumbing tool, and i also fiddled with the o-ring, and now it vapes better than it ever has, so I'll probably wont know what it was but its fixed!

Thanks a million times again Mvgratz and also thank you Robert

Eric

 

[sophie_lapin]

I got mine about a month ago and had the same problem.
Hubby did a similar fix to yours and now it's all good.