Questions about building an e-cig.

[FaniFox]

Hi all
It is very nice being here again at a forum that have really helped me a lot some time ago.
I was a regular e-cig user in the past. For the last 3 years I rolled back to normal cigarette smoking and now I wish to start using e-cigs again.
For the last 5-6 days I am reading and reading articles in order to understand some of the new e-cigs tecs but I have a lot of un-answered questions and they hold me back from ordering a new e-cig. Can you please help me with them?
- I want to build two e-cigs (especially since starters packs are not always available). I want the first one to use normal catridges as well as to have a jet system in order to use it without catridge. Do I need more than an atomizer, a cartomizer and a battery? Is the automatic battery safe to use with the cartomizer or using an automatic battery with the dripping method will damage the battery?
- In the past I had a Janty Classic and a Janty Yentl and I still have a lot of catridges left. Are they compatible with any of they new e-cigs and if they are, which one? By the way, can I use catridges that were left for three years in a dark, humid place or they are dangerous to use?
- Do you know if there is an automatic battery that fits Ego Jets Atomizer Round LR? Is E-Go automatic battery black compatible with the Jets atomizers?
Well, sorry for all these questions which for some might be very foolish but by them you can easily undertand the confusion I am in and
Thanks in advance!

 

[Danielsuzuki]

Smokeless image has sealed auto batteries now. Check out YouTube for construction of a box mod. Best of luck!

If you clean those cartridges real well in alcholol they should be ok. Not sure about your compatability question.

 

[dormouse]

Janty Jet is an Ego. 510 threading

For a big wide 510 atomizer to look right you might have to make a tube mod. And you want 3.7v (not 5v) to use exisitng atomizers you have.

Here see how to build a 3.7v box mod (may not be wide enough to look good with wide Ego atomizers or ones with built-on cone. Great for normal standard and LR 510 atomizers and cartos. If you have wide atomizers, maybe the instructions fot Goldrush tube mod would be good.
Madvapes Help Desk

Oh - I just noticed you are in Greece. I do not know who in the UK or Europe sells mod parts. Even Dave's Devices in the UK was having trouble getting parts since Madvapes stopped shipping internationally. The main non-standard part you would need to find is a sealed 510 atomizer connector (the socket). Check Liberty-Flights.co.uk - they might have some.

And there's a whole modding section on ECF that including a number of tutorials scattered through it. Once you have 5 non-spammed posts or replies in New Members plus an hour wait after the 5th, you will be able to post elsewhere on ECF, send PMs, etc. In National Forums there are Europe and Uk forums, in Buying & Selling are Europe and UK vendor sections and UK Classifieds.

---
You should only use LR stuff on big batteries (450mah+). I heard of one big battery auto model but I don't know what it is (nor would I even use it. Liquid could get inside your big battery and ruin it)

 

[FaniFox]

Thank you both.
Dormouse, can I use parts from the Janty e-shop to built it?