Really easy way to DIY your own E liquid!

[drewdripsalot]

Enjoy everyone! 50/50 PGVG banana crème 15ml 3mg how to! Also has calculations with other NIC levels!

Flame industries made a very detailed video on how to make some really good E liquid.

let me know what ya think!

https://www.youtube.com/watch?v=2W7jKWf5SjA

 

[Rwb1500]

Huh?
.

 

[InTheShade]

For some reason it didn't include your video OP. I think you need a certain number of posts before it will let you post links.

Hmm actually, it won't let me post the link either - check your link and repost maybe?

This is the one you posted

http://youtu .be/2W7jKWf5SjA

Broken to allow posting

 

[drewdripsalot]

Huh?
.

What are you confused about?

 

[drewdripsalot]

THANK YOU to InTheShade!!!

 

[Rwb1500]

For some reason it didn't include your video OP. I think you need a certain number of posts before it will let you post links.

That's what I'm confused about.

 

[drewdripsalot]

DIY E-liquid! mixing, ratios, nic, 50/50 PG/VG ! - YouTube

https://www.youtube.com/watch?v=2W7jKWf5SjA

 

[InTheShade]

There we go, we got there. I was confused for a moment too

Just a suggestion if I may - all the technical info like ratios and volumes, you might want to post up in a link to a spreadsheet in the comments. Perhaps you could include a link to a recipe for ejuice me up calculator or something instead of going over the sheets in the video. The first 5 minutes of the video are a little 'dry' with all the technical stuff going on.

Apart from that I actually enjoyed it...

 

[vaperature]

Nicotine does not burn through rubber gloves. Am I wrong?

 

[drewdripsalot]

There we go, we got there. I was confused for a moment too

Just a suggestion if I may - all the technical info like ratios and volumes, you might want to post up in a link to a spreadsheet in the comments. Perhaps you could include a link to a recipe for ejuice me up calculator or something instead of going over the sheets in the video. The first 5 minutes of the video are a little 'dry' with all the technical stuff going on.

Apart from that I actually enjoyed it...

Thank you for the suggestions! the next videos I will try and make them less dry!
Subscribe to my you tube channel.. more videos to come!!

 

[drewdripsalot]

Nicotine does not burn through rubber gloves. Am I wrong?

You can feel the stinging sensation through the rubber gloves.. (burning sensation)
Not quite burning through gloves.

 

[vaperature]

I've never heard of that before and can't possibly imagine how you could feel anything burning through rubber gloves. If it isn't burning a hole in the glove then how could it possibly be penetrating the rubber? I know people should be safe when using 100 mg solution, but it isn't acid.

 

[drewdripsalot]

I've never heard of that before and can't possibly imagine how you could feel anything burning through rubber gloves. If it isn't burning a hole in the glove then how could it possibly be penetrating the rubber? I know people should be safe when using 100 mg solution, but it isn't acid.

Flame industries who made the video is a raw material supplier and they deal with Nic on a daily basis. During the blending/ mixing process there is a burning sensation felt through the glove. They advise to use precaution and take off the gloves and wash your hands and use new gloves.
When using lower than 100mg nic its less likely to feel the burning or stinging sensation.
I appreciate your insight.
Thanks for everything!

 

[vaperature]

OK, I don't want to come off as if I'm attempting to argue or beat a point to death, so I'll just make this last comment and that'll be it. If you felt a burning sensation under the glove you either got nic on your hand before you put the glove on or you have a hole in your glove. I'm all for being cautious but also for sharing accurate information. If you're wearing rubber gloves you are safe. The nicotine is NOT going to burn your hand THROUGH the rubber, it's impossible. Thanks for the video though. Take care.

 

[rc3po]

I use 100mg Nic and haven't noticed any sensation. I don't usually get any on the latex gloves, but it's better to be safe than sorry.

 

[eGoinMD]

Not to hijack, but you want easy? I like a couple of MBV flavors, and a LOT of it, at 18mg 50/50(ish). I bought 24mg 25pg/75vg, and used 25%(which, from what I can tell, seems to equate to 2 flavor shots) MBV flavor(which is pg). I dumped the entire 15ml bottle of flavor in to a 60ml bottle and topped it off with the 24mg nic juice. Voila! 18mg juice at a 43.75%pg/56.25%vg(close enough to 50/50 for me) mix.

 

[drewdripsalot]

Not to hijack, but you want easy? I like a couple of MBV flavors, and a LOT of it, at 18mg 50/50(ish). I bought 24mg 25pg/75vg, and used 25%(which, from what I can tell, seems to equate to 2 flavor shots) MBV flavor(which is pg). I dumped the entire 15ml bottle of flavor in to a 60ml bottle and topped it off with the 24mg nic juice. Voila! 18mg juice at a 43.75%pg/56.25%vg(close enough to 50/50 for me) mix.

I like your style sir!!!!

Flame industries made a relatively hands-on video. Haven't seen very many videos similar to this one that spell it out plain and simple.

 

[Bez1978]

This makes me want to make my own juice

 

[Alien Traveler]

Cheap promotion of Flame industries?

Flame industries should better learn that there cannot be any “burning sensations” through gloves from mere 10% nicotine. Flame industries should know that disposing gloves immediately after chemical got on them is a good lab practice. Flame industries should not try to save on gloves (and they are really cheap).

 

[Alien Traveler]

I like your style sir!!!!

Flame industries made a relatively hands-on video. Haven't seen very many videos similar to this one that spell it out plain and simple.

There are a lot DIY videos on youtube, some of them pretty good.